9
9.0
Jun 11, 2021
06/21
by
(Isalvador)
data
eye 9
favorite 0
comment 0
Summary web cam mount Get Your Awesome Tesla-Filament Here:https://www.tesla-filament.com Buy a new Atom 3D Printer Here (international):http://www.atom3dp.com/en/shop/ Buy a new Atom 3D Printer Here (Israel):http://www.tesla-israel.com/3dprinter our YouTube Channel link:https://www.youtube.com/channel/UCW_5uCCH0x0R4iw-zfspnHg
Topics: camera_mount, thingiverse, webcam_mount, mount, stl
2
2.0
Aug 22, 2021
08/21
by
Hangry Alex (HangryAlex)
data
eye 2
favorite 0
comment 0
GoPro Hat Mount or Attachment System. I wantet to buy such a hat but I wanted to make it my self even more cuz it is nothing usual. Have fun using it. It works really well on my head and it is not shaking P.S. The one on the picture is the "invisible type" made out of 2 parts and I also made a "solo type" so its only one thing to print but you will see the seam. Have a good one.
Topics: GoPro, gopro_session_mount, Camera, mount, hat_mount, cap_mount, stl, thingiverse, camera_mount,...
8
8.0
Jan 16, 2021
01/21
by
Marshall (rynil2000)
data
eye 8
favorite 0
comment 0
Needed an adapter to affix my GoPro to a standard camera tripod mounting screw. Print the part and press in the hardware. The camera mount has an octagonal base for easy hand tightening. You will need the following to complete: 1 - M5 cap nut on the side for GoPro screw 1 - 1/4-20 threaded heat insert in the bottom for the tripod screw
Topics: Camera, GoPro_Mount, stl, tripod_mount, thingiverse, gopro_tripod_mount, mount, camera_mount, GoPro
9
9.0
Apr 17, 2021
04/21
by
Tommy Alcoumy (Tommyelk)
data
eye 9
favorite 0
comment 0
The Multi Mount is a 360 degrees rotating attachment to your Tronxy X1 3D printer. It is as easy as it gets to attach any thing such as phone, cooling fan, camera or even a small light. Simply use one or two rubber bands to hold the object attached to the mount.
Topics: Fan_mount, light_mount, iPhone_mount, Mount, multi mount, TronXY_X1, thingiverse, stl,...
4
4.0
Jun 7, 2021
06/21
by
Maxim Gridin (NyyphoHerr)
data
eye 4
favorite 0
comment 0
Sometimes you need to hang something on the wall (or even the ceiling) that is usually hung on a nail. Or the reciprocal part may simply be lost, as in my case with a small wall-ceiling flashlight that responds to movement. In this case, you will come to the aid of this adapter with a square of 50x50mm, just under the width of a widespread double-sided adhesive tape, for example, 3M or analogues. Tearing it off will not be so easy. You can hang something, for example, on a cabinet, on...
Topics: mount, Organization, thingiverse, stl, wall_mount, ceiling_mount
4
4.0
Jul 22, 2021
07/21
by
(nerdCopter)
data
eye 4
favorite 0
comment 0
### 20×20 Stack RX Strap-On TPU Mount for R9M R9MM CROSSFIRE NANO * Four versions (because you need some flex) - 34×11×0.96mm (holes 30mm apart) - 34×11×1.24mm ... - 35×11×0.96mm (holes 31mm apart) - 35×11×1.24mm ... Remix yours here: https://www.tinkercad.com/things/ljcKCKbSuLs --- - If you enjoy this, please "Like" or comment. - Please post "Makes". - Feel free to promote it using the [attribution card](./attribution_card). - Please consider subscribing to my...
Topics: R9M Mount, stl, RX Mount, R/C Vehicles, R9MM Mount, Crossffire Nano Mount, CRSF_Mount, R9 Mount,...
3
3.0
Jan 4, 2021
01/21
by
peter van voorn (mazhive)
data
eye 3
favorite 0
comment 0
This is a tv/monitor mount easy to use make 1 wall mount bracket and exchange with eas to another mount without taking the screws out of the wall just slide it in . This was inspired by some of the available on thingiverse but they were not quite what i want , i use it for my 32" tv/monitor when i have to plug in some cables i can easily slide it out do my cabling or change the monitor/tv and slide it back in. A lot has screws and nuts to be tightened and you sometimes cannot easily access...
Topics: tv_mount, stl, wall, vesa, Wall_mount, mount, vesa_mount, Office, thingiverse, monitor,...
4
4.0
Mar 31, 2021
03/21
by
Raffael G. (DR4GONST4R)
data
eye 4
favorite 0
comment 0
I designed and improved this thing for my own needs. I used some cheap chain to hand my projector from the ceiling. I had a lot of other ideas which weren't that cheap as the chain idea. I can tell you that it was a pain in the ass to get the correct screw to attach the 3d print to the printer. some weird ass imperial screw. Things I have to improve: -back lifts up. I will design something to clamp it to the projector case. Dont do any of the Fan mods i did. its kinda crap the fishing line is...
Topics: projector_mount, wall_mount, thingiverse, ceiling_mount, Mount, Blitzwolf, DIY, Projector, stl
7
7.0
Apr 18, 2021
04/21
by
Ryan Huang (yyh1002)
data
eye 7
favorite 0
comment 0
This model is a clamp to hold the phone clamp from Modular Mounting System to car AC vent. There are two sets of phone clamp files. The standard set holds phones up to 12mm thick. The 4mm thicker version accommodates phones with extra thick cases. Car Vent Clamp Sock.stl is a sock to be printed with flexible filament to add friction and protect your car from scratching. It should be sliced with a single wall layer and without bottom. To download more Modular Mounting System parts, go to...
Topics: Automotive, phone, car_vent_mount, thingiverse, stl, car_phone_mount, mount, modular_mount, car,...
3
3.0
Apr 24, 2021
04/21
by
Engür Canfes (Devilmanta)
data
eye 3
favorite 0
comment 0
Hi, I created this clip mount for my EKEN action cam. This has a frame that can be attached to wider than regular mount clip. So I updated this guy's creation to fit my frame. (Thanks to him for great creation) https://www.thingiverse.com/thing:2384832
Topics: frame_mount, Camera, camera_frame_mount, GoPro_Mount, wide_mount, stl, thingiverse, Eken,...
5
5.0
Mar 3, 2021
03/21
by
Li He (demonstrate)
data
eye 5
favorite 0
comment 0
This fits [BlackVue DR900S](https://www.amazon.com/BlackVue-DR900S-1CH-16GB-Micro-Card/dp/B07C39SF7S) (perhaps some older models as well). You still need a universal mount one can purchase online for
Topics: camera_mount, thingiverse, mount, stl, dashcam_mount, Automotive
5
5.0
Mar 17, 2021
03/21
by
Braden Holm (bradenh_)
data
eye 5
favorite 0
comment 0
This is wall mount for a phone with a steel piece on it for connecting to a car GPS holder. The GPS holder slides into the "plus" design, and the phone with magnetic strip attaches. I haven't printed this yet, so it will likely change. For a simplier one for use with the screen-side camera, see this: https://www.thingiverse.com/thing:3182697 Links for GPS mounts:...
Topics: phone, Camera, iphone, stl, mount, camera_mount, thingiverse, wall_mount, phone mount
8
8.0
Jan 15, 2021
01/21
by
Bhavik Bhansali (bhavikbhansali)
data
eye 8
favorite 0
comment 0
This camera mount is useful in FPV racing quadcopter. This is general purpose mount fitted in almost all frame and useful in almost all camera. 30_degree_camera_mount this file having bit thick text at the side wall. 30_degree_camera_mount_update having bit thin text at the side wall.
Topics: thingiverse, GoPro_Mount, stl, SJcam_gimble_mount, action_camera_mount, Drone_Mount,...
9
9.0
Jan 18, 2021
01/21
by
James Hugh (Churchillww1)
data
eye 9
favorite 0
comment 0
A ceiling mount for models that allows them to be lowered to the ground without the use of a ladder. Incorporates a ratchet system for easy lowering and raising. TEST WITH AT LEAST 3 TIMES THE WEIGHT PLANNED TO MOUNT FROM IT FOR 24 HOURS AT LEAST TO MAKE SURE IT DOESN'T COME LOOSE Use complete stl for guide on assembly attach a stretchy spring to the spring pin and the ratchet hook to ensure it doesn't slip To print (for one bend and one ratchet): Print axle support 4 times print axle once...
Topics: ceiling mount model, Adjustable_mount, stl, ceiling_mount, thingiverse, vehicle, RC_mount,...
4
4.0
Apr 16, 2021
04/21
by
David Oz (TheRozb)
data
eye 4
favorite 0
comment 0
Simple action grip for GoPro UPDATE: Added some more blends/fillets Check out Version 2: http://www.thingiverse.com/thing:954406 Max. Dim. 8" x 1.25" x 5.5"
Topics: thingiverse, stl, GoPro_Mount, mount, GoPro, camera_mount, Camera
195 pages 23 cm
Topics: Monadnock, Mount, Monadnock, Mount (N.H.), New Hampshire -- Mount Monadnock
4
4.0
Mar 22, 2021
03/21
by
Oz (John) Oswald (Oz81)
data
eye 4
favorite 0
comment 0
Needed a shorter stalk to cut down vibrations when mounting to a vehicle
Topics: stl, GoPro_Mount, Camera, camera_mount, ball_mount, thingiverse
10
10.0
Jan 18, 2021
01/21
by
Marko Adjin (Marko21)
data
eye 10
favorite 0
comment 0
This is a screw mount made especially for my phone but I mainly put it here so it gives you an idea of some kind. Would love to see if someone makes something like this so I know I helped you. There is a screw hole at the bottom but you can model something else, like a hole for a appropriate nut or coupling nut.
Topics: phone_mount, stl, thingiverse, screw, Gadgets, mount, camera_mount
5
5.0
Sep 14, 2020
09/20
by
Center for Accessible Technology in Sign
movies
eye 5
favorite 0
comment 0
ASL vocabulary
Topic: mount,mount on
7
7.0
Jan 19, 2021
01/21
by
Evan (Tinfoil_Haberdashery)
data
eye 7
favorite 0
comment 0
The Gopro mounting architecture is fairly ubiquitous and comes with a lot of sturdy attachments. However, converting between that and standard 1/4-20 tripod mounts for other cameras or gimbals has always been annoying. Previous adapters available to either buy or print interfaced with the inter-meshing tabs on an existing "foot", which introduced complexity and slop to the system. This adapter seats directly in a Gopro mount bracket and threads directly into a 1/4-20 female mount. In...
Topics: Camera, camera, stl, GoPro_Mount, tripod_mount, thingiverse, tripod, mount, camera_mount, GoPro
2
2.0
Aug 22, 2021
08/21
by
(jackw01)
data
eye 2
favorite 0
comment 0
3D printable phone clamp with GoPro-compatible mount, designed for attaching a phone to a tripod or other mounting hardware. Fits phones from 69.5mm to 86mm wide (almost all recent smartphones, except the iPhone 12 mini). The mount has a standard GoPro-compatible adjustable angle mounting point for use with any other mounts designed for use with GoPro cameras. STL files for a 3D printable GoPro-compatible tripod mount and a 3D printable GoPro-to-Arca Swiss quick release plate adapter are...
Topics: Mobile Phone, clamp, phone, mount, tripod_mount, stl, thingiverse, GoPro_Mount, phone_mount
12
12
Apr 16, 2021
04/21
by
Jason (jasonatepaint)
data
eye 12
favorite 0
comment 0
Designed to replace a [store-bought handle bar mount](http://store.ecoxgear.com/collections/accessories/products/handle-bar-mount) that could support a device w/a 1/4"-20 threaded nut. After buying 2 of them and having both of them break on me, I decided it would be fun to recreate the mount but make a few improvements, which include: * Reinforcing the areas that were susceptible to breaking because they had very thin walls. * Increased the size of the thumbscrew that tightens the...
Topics: bicycle_mount, Outdoor & Garden, handlebar_mount, bike, bicycle, thingiverse, Bike_mount, stl,...
10
10.0
Jun 20, 2021
06/21
by
Pilke Hocca (pilkehocca)
data
eye 10
favorite 0
comment 0
Mounting bracket for anything. Just edit values from the SCAD-file to purpose it for your own. Initially I designed this to hold my 3D-printers PSU behind the counter it sits on. Given STL-file is complided using default measurements of 101 x 41 mm.
Topics: customizable, universal, thingiverse, case_mount, power_mount, universal_mount, psu_mount, stl,...
6
6.0
Jan 21, 2021
01/21
by
Mart Ypeij (Bishamon1987)
data
eye 6
favorite 0
comment 0
This is a mount for a smartphone (Moto G5) and a dashcam (GT3000)
Topics: dashcam_mount, car_mount_smartphone, car_mount_dashcam, thingiverse, Cell_phone_car_mount,...
4
4.0
Mar 15, 2021
03/21
by
Zai West (bonzailyte)
data
eye 4
favorite 0
comment 0
Lightweight Frame for mounting Gopro Camera Works With Original gopro Hero 1 and 2. Fits snug in PLA, if you dont want it tight (but not too tight) make it 101% or so. Needed a frame for my older gopro that would allow me to plug in USB while using the BACPAC
Topics: GoPro, camera_mount, thingiverse, mount, GoPro_Mount, Camera, stl
4
4.0
May 1, 2021
05/21
by
Алексей Махно (silentlexx)
data
eye 4
favorite 0
comment 0
Just TomTom GO and ONE Bicycle Stem Mount ;)
Topics: stl, Sport & Outdoors, mount, gps_mount, thingiverse, bicycle_mount
8
8.0
Jan 16, 2021
01/21
by
Bill Debevc (ReadTheFactoryManual)
data
eye 8
favorite 0
comment 0
This is a little wall mount I made because I needed something that would fit in the Mod-T printer. Seems to work well, make sure you use good wall mounting screws and such. I just have one on my monitor but if you are scared you could print two. I have an old 24" Dell monitor (2408WFPb). Good luck and don't cry to me if you stuff falls. Mine hasn't yet. You will need to following hardware. Update: I added a different version that will lower your monitor, just in case you are a dummy like...
Topics: Electronics, VESA_100, monitor_mount, thingiverse, TV_mount, vesa_mount, mount, vesa, stl
3
3.0
Mar 9, 2021
03/21
by
Renato Alvares (Alvares)
data
eye 3
favorite 0
comment 0
Phone Holder for handlebars as per request, almost all parts can be printed. 1 - It requires elastic bands to be used to tighten the phone, I believe I made the hooks strong enough for as many elastic bands as needed. 2 - It requires 1x 3mm Eye screw as seen modeled and a matching 3mm Wingnut fost fastening the clamp to the handlebar. 3 - It requires 1x M3 screw to fix the phone holder to the ball axis. All parts that require movement have a tollerance of 0.2 - 0.25mm for tight fitting but...
Topics: smartphone_holder, stl, thingiverse, mount, phone_mount, handlebar_mount, Bike_mount,...
11
11
Jan 9, 2021
01/21
by
Philippe Mandeville (philopito)
data
eye 11
favorite 0
comment 0
GoPro/Action Camera Mount for QAV250
Topics: drone, R/C Vehicles, thingiverse, GoPro_Mount, stl, QAV250_GoPro_Mount, QAV250_Camera_Mount, mount,...
7
7.0
Sep 14, 2020
09/20
by
Center for Accessible Technology in Sign
movies
eye 7
favorite 0
comment 0
ASL vocabulary
Topic: mount
4
4.0
Apr 9, 2021
04/21
by
Bowman (bbo)
data
eye 4
favorite 0
comment 0
These were designed for the Replicator 2 but are compatible with the Replicator 1 and most of the comparable knockoffs. [Creator, Duplicator Mbot etc] Sorry folks these ones have to be printed with support.
Topics: duplicator_spool_mount, Creator_spool_mount, Replicator_spool_mount, 3D Printer Accessories,...
5
5.0
Mar 22, 2021
03/21
by
Oz (John) Oswald (Oz81)
data
eye 5
favorite 0
comment 0
Needed a ball adapter for a tripod, couldn't find one so I designed one.
Topics: stl, tripod_mount, GoPro_Mount, Camera, camera_mount, thingiverse
6
6.0
Mar 3, 2021
03/21
by
Alexey Evgrashin (Evleksey)
data
eye 6
favorite 0
comment 0
This is version 2 of my GoPro Bicycle Seat Mount. The camera will face backwards. Fits on two seat rails, which 42 - 50 mm apart. You can adjust dimensions in Fusion 360 to make it fit your bike, f3d file included.
Topics: Camera, camera_mount, mountainbike, thingiverse, GoPro_Mount, Bike_mount, gopro_session_mount, stl
4
4.0
Mar 8, 2021
03/21
by
marc dalanni (marcd53)
data
eye 4
favorite 0
comment 0
I used Pla and Ptu for the parts, it is not made yet but will update when I make it, feel free to customize it to your needs, the difference in the 2 versions is v2 has a 8mm gap v1 is smaller. don't forget to like and post if you make it., I added some adapter spacers to the file for the accessory bar, I realized it will be too small for most clamps.
Topics: handelbar mount, universal_holder, universal, universal_mount, bicycle, stl, thingiverse,...
3
3.0
Jan 7, 2021
01/21
by
K Maker (KMakerguy)
data
eye 3
favorite 0
comment 0
My charging cable kept falling down off the bed and my phone would fall with it. This wall mount will keep the phone in a holster and keep the cable ready for use.
Topics: phone mount, Organization, stl, iphone mount, wall mount, thingiverse
5
5.0
Mar 15, 2021
03/21
by
Evgeniy Z (SlimpDev)
data
eye 5
favorite 0
comment 0
Default size is for Seagate Backup Plus, but in slicer, you can adjust size for any hdd, like me. Enjoy!
Topics: thingiverse, HDD_mount, Computer, wall_mount, stl, ssd_mount
4
4.0
Mar 20, 2021
03/21
by
Ricardo Palma (rjpalma)
data
eye 4
favorite 0
comment 0
GoPro Mount for Quick Release Tripoid 41x41mm Hama Tripoid
Topics: quick_release, GoPro, stl, tripod_mount, GoPro_Mount, Camera, mount, camera_mount, thingiverse
5
5.0
Mar 9, 2021
03/21
by
Dave Zacaron (SpDave)
data
eye 5
favorite 0
comment 0
DM01M wall mout holder. This is a multimeter holder come in 2 version ,print what you need.
Topics: multimeter wall mount, stl, thingiverse, DM01M, tacklife mount, wall mount, holder, Tacklife wall...
3
3.0
Apr 19, 2021
04/21
by
Charlie Marsh (MarshPrints)
data
eye 3
favorite 0
comment 0
Wall mount for the Playstation Dualshock 4 Affix to wall using picture hanging strips or equivalent (I use https://www.amazon.co.uk/gp/product/B006RJWYPC/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1) View my profile for other Playstation controller wall mounts: https://www.thingiverse.com/marshprints/designs
Topics: Ps4 mount, thingiverse, wall mount ps4, stl, PS4, Dualshock, ps4 wall mount, Controller mount, wall...
3
3.0
Mar 4, 2021
03/21
by
Dek (declanshanaghy)
data
eye 3
favorite 0
comment 0
This swivel mount has detents spaced at 45 degrees either side of the insertion point. This allows for mounting something that needs rotating between two 90 degree positions. I used it for mounting a tablet to the wall.
Topics: swivel, Household, thingiverse, wall_mount, mount, stl, swivel_mount
9
9.0
Jan 12, 2021
01/21
by
(tufguy22)
data
eye 9
favorite 0
comment 0
100% Accurate Mount
Topics: Camera mount, Mount, thingiverse, Camera, stl, Go Pro Mount
3
3.0
Apr 3, 2021
04/21
by
Simon Galand (OstreumDeus)
data
eye 3
favorite 0
comment 0
A simple rotating mount for the rd6006 power supply
Topics: thingiverse, rotating_mount, desk_mount, mount, RD6006_case, stl, plank_mount, DIY, rd6006
4
4.0
May 1, 2021
05/21
by
Romulo Albuquerque (romqrq)
data
eye 4
favorite 0
comment 0
This is my first try at this ball-jointed monitor mount. A few things that might be worth mentioning: 1- I left a hole going through the center of the shaft of "male_ballJoint2" so it is possible to run a safety wire as an extra safety step. I thought of it but I'm not using any. 2 - The same shaft above is longer than it needs to be so I cut it off about 1/4 of an inch but that raised a second problem that I'm gonna address below. 3 - The threads won't go in smoothly as I used one...
Topics: stl, monitor, Office, monitor_mount, display_mount, TV_mount, wallmount, wall_mount, thingiverse
6
6.0
Jan 21, 2021
01/21
by
Valentin Pelloin (valentinp72)
data
eye 6
favorite 0
comment 0
Some XT60 and USB B panel mounts. Designed to be glued on the panel.
Topics: Electronics, usb_mount, usb_mount_panel, XT60, xt60_connector, xt60_mount_panel, thingiverse,...
4
4.0
Apr 16, 2021
04/21
by
Christopher Jahn (crjahn66)
data
eye 4
favorite 0
comment 0
This is to be a case to go on a GoPro Hero 3 or 4 that allows you to keep the water proof case on while flipping which side the mount screw can be on. For example this is a useful feature if you have a paintball mount that holds the GoPro upside down, this allows you to flip it while keeping the waterproof feature of the original case. I am still working on the fit, it is close and usable but not where I want it to be. Update (Aug 11): I have made some adjustments to hopefully get a better fit....
Topics: Reverse_Mount, 3D Printing, gopro_case, thingiverse, stl, GoPro_Mount, mount, GoPro, camera_mount
3
3.0
May 21, 2021
05/21
by
Søren Larsen (Zoren)
data
eye 3
favorite 0
comment 0
Camera Mount for Ip camera, see picture. Dimension. Outer ring: 53 mm. Inner ring: 40.0 mm. Center ring 33.5 mm.
Topics: webcam_mount, mount, camera_mount, thingiverse, Camera, webcam_holder, webcam, camera, stl,...
3
3.0
Apr 2, 2021
04/21
by
Raphael Ruiz (gorefish)
data
eye 3
favorite 0
comment 0
This is a simple wall mount for the D-Link DGS-108 ethernet switch. This small 8-port gigabit switch has two tiny mounting holes on the bottom that only allow for mounting width-wise. This bracket will allow vertical as well. Note this brace is designed for the "sturdy" end to face downward if you choose to mount width-wise as the small clip on the opposite end may not survive long term weight-bearing if you hang the other way around. Also, the holes in the bracket line up fairly well...
Topics: mount, wall_mount, thingiverse, switch_mount, Tool Holders & Boxes, ethernet, stl,...
4
4.0
Mar 16, 2021
03/21
by
Victor Gianotto (Gianotto)
data
eye 4
favorite 0
comment 0
Gopro helmet camera or light mount. Its follow standard Gopro mount, so it works with any Gopro adapter. Attach it to the helmet with nylon straps.
Topics: Sport & Outdoors, thingiverse, helmet_camera_mount, mount, gopro, GoPro_Mount, helmet, stl,...
4
4.0
Jan 4, 2021
01/21
by
Aleksandr Aleksandrov (alexlpr)
data
eye 4
favorite 0
comment 0
Feel free to support me, so I can create and share even more awesome projects. Thank you! Hello Friend! Come to my website. There you can find links and reviews about quality hobby products. https://MyHobbyTools.com ✔ 3D PRINTING My Favorite 3D Printers 3D Printing Tools 3D Printer Parts ✔ ELECTRONICS Batteries and Chargers Soldering Kits & Modules Multimeters Connectors ✔ TOOLS Power Tools Hand Tools ✔ RC RC Drone Parts RC Tools RC Drone Setup YouTube:...
Topics: Mount, camera_mount, stl, xiaofang, Camera Wall Mount, Xiaomi_XiaoFang, thingiverse, Gadgets, Wall...
4
4.0
Jun 6, 2021
06/21
by
Marc Mailloux (MARCTHESHARK)
data
eye 4
favorite 0
comment 0
Want to hang up your road sign without having to see the screw hardware? Well, you found the perfect model!! Print as many as you need, place the lower mounts first (be sure to level). Then measure up for the top row, screw in hardware and slide in the sign from the left or right! Boom!
Topics: mount, sign mount, road sign, road mount, thingiverse, stl, Signs & Logos, road sign mount
