13
13
Jan 16, 2021
01/21
by
Boris (Bokix)
data
eye 13
favorite 0
comment 0
A stand for Macbook pro 2016/17. Tested with my 13" Macbook but a 15" Macbook should work as well.
Topics: macbook_pro_stand, macbook_holder, macbook, thingiverse, macbook_pro, macbook_stand, Computer, stl
9
9.0
Jan 17, 2021
01/21
by
Brett McGinnis (brettmcgin)
data
eye 9
favorite 0
comment 0
I have been using this dock for over a year, and although it does work. It led to screen/overheating issues. I would not recommend using this, unless airflow holes are added. This is a dock for the [belkin express dock](http://a.co/5PNWQ02). The design is on [onshape](https://cad.onshape.com/documents/2f7fdb6839f00d4f4db7d9dc/w/03365f1d7eceaa6992d3801e/e/7b430e23640ec26948ebd5fc) If there is enough interest the cable part could be updated to be modular to fit more types of usb c cords. If you...
Topics: macbook, macbook_dock, thingiverse, Office, macbook_pro, macbook_stand, stl
8
8.0
Jan 17, 2021
01/21
by
Stefan Seifert (xoration)
data
eye 8
favorite 0
comment 0
This is a simple Macbook powersupply holder whcih can be strapped to the leg of your table with zip ties. It might be necessary to use double sided tape to keep the holder in place.
Topics: macbook, thingiverse, macbook charger, macbook pro, Computer, stl
8
8.0
Apr 17, 2021
04/21
by
Igor Topolski (igortopolski)
data
eye 8
favorite 0
comment 0
A simple Macbook stand - there are 2 versions standard and long. Standard - It should fit 13 inch MacBook models, a bit to short for Macbook Pro 15 the screen changes balance Long - I am using it with my Macbook Pro 15.4" 2016 version and it works fine Prints without support, I have added 5 line wide brim to make sure that it stays on the platform while printing. Parts for assembly: 4 x M4 bolts 16mm long 4 x M4 nuts If you like my design let me know in comments!
Topics: macbook_air, thingiverse, stl, macbook_stand, macbook_pro_stand, Office, macbook_pro,...
3
3.0
Apr 4, 2021
04/21
by
None None (romanaerl)
data
eye 3
favorite 0
comment 0
This stand is massive enough and can hold macbook 15" on it quite stable. Its a 45 degree stand which holds Macbook 5 cm above the desk which is very useful to have some place for paper or other small stuff on table while maintain less used space on a table. Macbook pictured is MacBook Pro (Retina, 15-inch, Late 2013) You will need to print: - 2x sides - 2x down stands - 3x connector sets The stand parts connects without request of a glue, but some glue can be helpful between down stand...
Topics: thingiverse, macbook, macbook_stand, macbook_pro, stl, Computer
2
2.0
Dec 1, 2021
12/21
by
Dorian Grey (DorianGrey)
data
eye 2
favorite 0
comment 0
Given the current state of Thingiverse, **Downloads broken, Thingview broken**, I recommend to visit the [thing on prusaPrinters](https://www.prusaprinters.org/prints/87674-macbook-air-side-stand) to check on it or download it. ___ The use case for this thing is when you are about to sleep away lying on the side but still want to watch a bit of that movie. You put the laptop into the holder and it will stay on the side so the movie looks right when you look at it.
Topics: macbook_stand, macbook_air, Computer, thingiverse, stl, macbook
14
14
Jan 11, 2021
01/21
by
Varun Heta (VarunHeta)
data
eye 14
favorite 0
comment 0
I prefer to keep my laptop screen high while working on it. So I designed this MacBook Pro stand as my weekend project using Autodesk Fusion 360. Download Fusion 360 http://www.autodesk.com/products/fusion-360/overview Notes:- - I haven't tried printing it with different materials, only tested it with PLA. Please keep me posted if anyone prints it in different material. - If you want to update or modify the design then I wont mind sharing the original .f3d files, ping me if you need it. - I...
Topics: laptop, thingiverse, stl, macbook_air, macbook_stand, Retina_Macbook_Pro, Computer, laptop_stand,...
5
5.0
Mar 15, 2021
03/21
by
Christophe Fonteyne (makermens)
data
eye 5
favorite 0
comment 0
I redesigned this, but it was heavily inspired on the original one that I still consider it a remix. I raised the stand to allow access to the front ports of my docking station underneath. Since I have a more recent macbook pro (2016), I lowered the 'hook' to 9mm, so now my laptop is nice and snug. I also made a few cosmetic changes, like the apple logo, and reduced the width to 3mm, which is still strong enough.
Topics: macbook_stand, thingiverse, Macbook_Pro_Retina_15, macbook, stl, macbook_pro, Office
10
10.0
Apr 30, 2021
04/21
by
Andrew Malota (2bitoperations)
data
eye 10
favorite 0
comment 0
Quick remix of Sirjoe's excellent macbook charger mount to hold an 85w adapter. Printed a couple to hold chargers to the underside of a coffee table.
Topics: stl, macbook, macbook_charger, Organization, macbook_pro, thingiverse
3
3.0
Apr 3, 2021
04/21
by
Skyhawk Cosplay (skyhawkcosplay)
data
eye 3
favorite 0
comment 0
Simple stand for my notebook to clear up desk space. I glued in some green felt to avoid scratches.
Topics: thingiverse, macbook, macbook_stand, macbook_pro, stl, Computer
4
4.0
Jun 7, 2021
06/21
by
JASON BURT (jsn0327)
data
eye 4
favorite 0
comment 0
I have an older 2012 Macbook Pro 13" and I just bought a new 2019 Macbook Pro 13". Rather than print two stands, I decided to remix this nice design and create a double stand. The 2012 Macbook Pro is 10mm thicker than the new 2019. One of the slots is 30mm and the other is 20mm. This leaves 5mm extra per slot for gluing felt. Thanks to the original designer!
Topics: Organization, macbook_pro, thingiverse, macbook, stl, macbook_stand
3
3.0
Apr 28, 2021
04/21
by
Brian Wilson (bdwilson)
data
eye 3
favorite 0
comment 0
Changed these to work with both my 2015 and 2019 Macbook Pro's. It will block some ports on the 2015, but in my situation, I'm not using the lightning port and my right USB port has a UBIKEY, thus having this in front of it is welcome since I often hit it by mistake. 2015's are just tall enough so that the front rubber feet still make contact, thus the machine won't slide around. I printed with 10% infill.
Topics: Computer, thingiverse, macbook_pro, macbook_stand, stl, macbook
6
6.0
Mar 18, 2021
03/21
by
Targo Dove (TargoDove)
data
eye 6
favorite 0
comment 0
Take a look at the original for summary and details etc. All I did is add a bar that clips into both sides to hold them in place.
Topics: Retina_Macbook_Pro, macbook_pro, laptop_stand, macbook_air, Computer, macbook_pro_stand, stl,...
2
2.0
Jan 18, 2022
01/22
by
Marlon Weber (MRLNWBR)
data
eye 2
favorite 0
comment 0
Designed to add some 3mm thick self-adhesive insulation tape to protect your Macbook from scratches.
Topics: Computer, macbook_pro, macbook, thingiverse, 14_macbook, 2021, stand, macbook_stand, stl
4
4.0
Jun 9, 2020
06/20
by
Gruman, Galen
texts
eye 4
favorite 0
comment 0
xxii, 393 p. : 23 cm
Topics: MacBook Pro (Computer), MacBook (Computer)
8
8.0
Jan 17, 2021
01/21
by
Zoti Zoti (Zoti)
data
eye 8
favorite 0
comment 0
This is a MacBook Pro under the table rack. You use 2 screws per side to attach it under the desk so you can slide your MacBook Pro under the table when using it with an external monitor and keyboard. Can also be used as a wall mount. Has two openings on the side for your USB-C and headphone connections. Was designed for a 2016-2017 13" MacBook Pro. I believe it will work with the 15" version as well. Might work with other models but I have not tested it. There is one file. It is of...
Topics: macbook, thingiverse, apple, Office, macbook_pro, macbook_stand, stl
4
4.0
Jan 5, 2021
01/21
by
Jan Michael (Kelz0n)
data
eye 4
favorite 0
comment 0
i could't find the right part from the original part, so I created it tips are always welcome :)
Topics: Organization, stl, macbook_pro, macbook, thingiverse, macbook_stand, macbook_pro_retina_13
5
5.0
Mar 17, 2021
03/21
by
Mitch Z. (XYKLONE)
data
eye 5
favorite 0
comment 0
Scale model of 15" MacBook with touch bar (2016 onwards).
Topics: Retina_Macbook_Pro, Macbook_Pro_Retina_15, macbook_pro, Models, stl, thingiverse, macbook
9
9.0
Apr 28, 2021
04/21
by
Rune Lauritsen (The_Craft_Dude)
data
eye 9
favorite 0
comment 0
(please feel welcome to check out, all of my other designs under my profile :P https://www.thingiverse.com/The_Craft_Dude/designs ) This laptop stand is designed to elevate the laptop or macbook from the table, and angle the keyboard for easier typing, while helping with keeping the computer from not sliding down, thanks to the lip, this stand should fit most laptops and such. NOTE: * please note that it might require a large printer, to print this object.
Topics: Computer, thingiverse, macbook_air, laptop, MacbookAir, macbook_pro, macbook_stand, stl,...
4
4.0
Apr 1, 2021
04/21
by
Michael Pforr (ownsmarthome)
data
eye 4
favorite 0
comment 0
Macbook Pro - Double wall mount Also changed the holes for countersunk screws so your macbook don't get scratched.
Topics: wall_mount, macbook, Computer, thingiverse, macbook_pro, macbook_stand, macbook wall, wall, stl,...
2
2.0
Apr 19, 2022
04/22
by
Sergey Chizhikov (chiibis)
data
eye 2
favorite 0
comment 0
### Vertical stand for Macbook 14" M1 Pro Tight fit, designed specifically for this model If you want to test if first, try to print with 5% height.
Topics: thingiverse, stand, macbook_pro, macbook_m1, macbook, stl, Computer
2
2.0
Apr 20, 2022
04/22
by
Sergey Chizhikov (chiibis)
data
eye 2
favorite 0
comment 0
### Macbook Pro 13" Late 2017 stand Designed to fit perfectly this specific model. Will not suit others. If you want to try it first, just print with 5% height and see if it fits your model.
Topics: thingiverse, stand, macbook_pro, macbook_stand, macbook, stl, Computer
3
3.0
Jan 5, 2021
01/21
by
Bastian Karge (Bastl34)
data
eye 3
favorite 0
comment 0
MacBook Pro 2015 Stand Size: 100x145 mm
Topics: stl, Computer, macbook_pro, macbook, thingiverse, stand, macbook_stand
3
3.0
Jan 7, 2021
01/21
by
David Arenes (davidarenes)
data
eye 3
favorite 0
comment 0
Table MacBook charger support with screws.
Topics: stl, Apple_charger, macbook_air, macbook_pro, Office, Desk_organizer, macbook, thingiverse,...
9
9.0
Apr 22, 2021
04/21
by
Daniel Lew (Goananndan)
data
eye 9
favorite 0
comment 0
This remix is for the Macbook Pro 13" [2015] model. It might work on other models although I don't know. It also isn't a snap in foot.
Topics: 3D Printing, macbook_pro, stl, macbook, thingiverse, macbook_pro_retina_13, Retina_Macbook_Pro,...
3
3.0
Apr 1, 2021
04/21
by
(rantta)
data
eye 3
favorite 0
comment 0
Laptopholder that can be installed under shelf / desk or on wall. Designed for Macbook Pro or similar (16 mm, gap on design is about 20 mm wide). Design includes versions with larger holes on side for TB3-cables. There is versions with lip onto top of the shelf / desk (for 19 mm width) on front, and also version without the lip. Mirror for other side.
Topics: macbook, laptop, macbook_air, thingiverse, Computer, macbook_pro, macbook_stand, laptop_stand, stl
11
11
Apr 28, 2021
04/21
by
Enrico Aleandri (enricoaleandri)
data
eye 11
favorite 0
comment 0
This is a Macbook PRO support, is company branded but I will upload a neutral version. Also there is a problem with angulation, It need to be decreased of 20 degree.
Topics: Computer, thingiverse, apple, mac, macbook_pro_stand, macbook pro, stl, macbook_pro_support, macbook
9
9.0
Mar 9, 2021
03/21
by
Alessio Graziano (AxelTB)
data
eye 9
favorite 0
comment 0
Stand for Macbook pro retina something I made for a friend. The main goal was to be able to print a "laptop" stand out of a 200x200 mm printer . Be aware of material warping! Made with a real pc.
Topics: macbook, stand, Retina_Macbook_Pro, stl, thingiverse, macbook_stand, Computer
1
1.0
Oct 30, 2021
10/21
by
Tom Tom (Jarves)
data
eye 1
favorite 0
comment 0
Replacement protective Cap for the magnetic Magsafe Charger Connector on Macbooks. Fits on the Plug like the original Cap. Has a clip to attach the cap to the charger cable so that it is not easily lost ... -------------------------------------------------------------------------------------------------------------- Ersatzschutzkappe für den magnetischen MagSafe Ladegerätestecker der Macbooks. Sitzt auf den Stecker wie die Original Schutzkappe. Hat einen Klipp, um die Kappe am Kabel des...
Topics: apple, thingiverse, Macbook_Pro_Retina_15, Computer, macbook, stl, Retina_Macbook_Pro, macbook_pro
2
2.0
Jan 18, 2022
01/22
by
Rahul Tadakamadla (rtdk)
data
eye 2
favorite 0
comment 0
After searching for a reasonably priced vertical dock solution for a long time, I decided to make use of the existing dongles for a macbook my wife uses. The result of this experiment is this dock which should allow for more space on her desk, better looking work area, almost same docking/undocking time as compared to her previous setup without anything. Next Improvement Ideas: Make the dock part more stable to allow one handed docking/undocking operation. Ignore the poor paintjob, still...
Topics: macbook_air, macbook_pro_2020, Computer, macbook_pro, macbook, laptop_stand, thingiverse,...
2
2.0
May 1, 2021
05/21
by
Tomás Toloza (fntsm)
data
eye 2
favorite 0
comment 0
Macbook Pro 15'' 2017 Vertical Stand The slot has a 15.5mm widht and a 25mm height
Topics: stl, macbook, Office, macbook_stand, thingiverse
3
3.0
Mar 25, 2021
03/21
by
Lluís Llimargas (LluisLlim)
data
eye 3
favorite 0
comment 0
[EN] wanted to organize my desk, saving some space placing my 2013 model Macbook Air in vertical position, but didn't fit in any of existing stands because the plastic protective covers. So I designed this for Macbook Pro and Macbook Air. Macbook Air fits pretty well, not too tight, and very stable if placed in an horizontal surface. If you want to increase stability, try using double-side adhesive tape under the stand....
Topics: stl, macbook_air, thingiverse, Organization, MacBook_Air_stand, macbook_stand
4
4.0
Apr 8, 2021
04/21
by
(Creative_Electronics)
data
eye 4
favorite 0
comment 0
SINGLE MACBOOK VERSION ALSO AVAILABLE NOW: http://www.thingiverse.com/thing:1266212 Simple stand for 2 MacBook Air's. Printed at [Creative Electronics HUB](http://www.3dhubs.com/tilburg/hubs/creative-electronics)
Topics: Macbook_Air_13, MacBook_Air_stand, mb_air, macbook_air, stl, thingiverse, Computer, macbook
9
9.0
Jun 12, 2021
06/21
by
(The_Craft_Dude)
data
eye 9
favorite 0
comment 0
Summary (please feel welcome to check out, all of my other designs under my profile :P https://www.thingiverse.com/The_Craft_Dude/designs ) this is an universal stand for either a MacBook or any other kind of laptop. There are 2 sizes, the small one 16cm, and the large one at 20cm. Both stands are designed to hold different kind of laptops, no matter how thick or thin they might be.
Topics: computer, macbook_pro, computer_stand, macbook_stand, universel, macbook, thingiverse, stand,...
4
4.0
Apr 8, 2021
04/21
by
Motoi Ishibashi (motoi1484)
data
eye 4
favorite 0
comment 0
Lock the apple's magsafe2 adapter to macbook body. This will be useful for a permanent installation. Only for Macbook Pro 15 inch retina model.
Topics: Macbook_Pro_Retina_15, macbook_pro, Retina_Macbook_Pro, MagSafe_2, stl, thingiverse, Macbook,...
9
9.0
Mar 12, 2021
03/21
by
Song Zhao (zhaosong414)
data
eye 9
favorite 0
comment 0
The arch is probably the most classic design for the mac stand. For a mac stand, I only have 3 requirements: usable, simple and looks nice(very personal). This design fits them all. This stand is for MBP 13' retina. the dimension of the upper most part of the opening on the top is 18mm. A scaling may make the stand fit for other models of mbp, I didn't try it. The mac_stand_v2 is with an opening whose upper opening dimension is 18mm and the lower opening dimension is 15mm, this design provides...
Topics: macbook_pro_retina_13, thingiverse, mac_stand, macbook, macbook_stand, Office, stl, macbook_pro
3
3.0
Dec 13, 2021
12/21
by
Lucas CAVADA (Net_work)
data
eye 3
favorite 0
comment 0
Macbook early 2008 white unibody stand (4.1)
Topics: macbook, Macbook 4.1, laptop_stand, MacBook 2008, MacBook white, stand, Computer, stl, laptop,...
6
6.0
Apr 20, 2021
04/21
by
Andrey Kupreychik (foxel)
data
eye 6
favorite 0
comment 0
This is a notebook holder for vertical installation on a wall. Designed for a colleagues MacBook Pro 15.
Topics: thingiverse, macbook, notebook_holder, stl, macbook_holder, macbook_air, Organization
3
3.0
Apr 1, 2021
04/21
by
ELTON WONG (nerdyviews)
data
eye 3
favorite 0
comment 0
I lost the cover for my magsafe charger for my MacBook Air a while ago (I think most people did) so here's a cover I made in Fusion 360 that clips to the wire. I actually drew this out in a book and made ELEVEN versions until the cover finally fit. They are all varying versions of .1mm until it fit. I probably still have to reinforce the strap somehow as I see that breaking soon but for now, this works!
Topics: macbook_air, macbook, magsafe, thingiverse, Computer, macbook_pro, apple, stl
3
3.0
Jan 7, 2021
01/21
by
Omer Evet (Ceranimo)
data
eye 3
favorite 0
comment 0
More precise design for old Macbook Pro's. I got mid 2012.
Topics: stl, Computer, macbook_pro, macbook, thingiverse
3
3.0
Jan 10, 2021
01/21
by
Robertino Iorii (tinoiorii)
data
eye 3
favorite 0
comment 0
Tired of USB-C cables getting disconnected, I created this holder. No more issues now :) Laptop: MacBook Pro (13-inch, 2017, Two Thunderbolt 3 ports) I imagine that cables are pretty standard but double check if the body of the connector it's kinda the same size. This model it's for a 22mm plug body. Gcode it's for Artillery Sidewinder X1 as the Cura project. I suggest using the brim, just to have a good adhesion, but it's up to you + your printer. I was also using 10% infill cause without,...
Topics: thingiverse, stl, apple, macbook_pro_13, Computer, macbook_pro, macbook
3
3.0
Mar 16, 2021
03/21
by
Carsten Braun (IceStormNG)
data
eye 3
favorite 0
comment 0
The 16" MBP has a little issue where the VRMs will overheat during longer use under high load (like exporting 4K video from Final Cut) and the machine will heavily throttle the CPU and GPU. The main reason is, that heat collects between the bottom of the machine and the surface it sits on (there is barely any room). I know, there are cooling pads and other stands, but I prefer the laptop to sit straight. They're quite fast to print and don't need a lot of material. These little spacer feet...
Topics: thingiverse, Computer, macbook, Macbook_Pro_Retina_16, stl, macbook_pro
6
6.0
Mar 17, 2021
03/21
by
EC (2chengzzz)
data
eye 6
favorite 0
comment 0
- Designed for 15'' MacBook Pro. It can probably fit 13'' MacBook and others. - No support needed. - Parts slide and lock together. No glue needed. - I used 30% infill. Could have probably used less.
Topics: Macbook_Pro_Retina_15, macbook_pro, laptop_stand, Computer, stl, macbook_stand, thingiverse,...
2
2.0
Dec 1, 2021
12/21
by
Dorian Grey (DorianGrey)
data
eye 2
favorite 0
comment 0
Given the current state of Thingiverse, **Downloads broken, Thingview broken**, I recommend to visit the [thing on prusaPrinters](https://www.prusaprinters.org/prints/87563-macbook-air-stand-v2) to check on it or download it. ___ The use case for this stand is to hold the laptop up on my chest while I lie in bed and avoid getting cramps in my hands trying to balance it manually. This is my second take on the topic, ([v1](https://www.thingiverse.com/thing:5139368)) V2 is more lightweight and...
Topics: macbook_stand, macbook_air, MacBook_Air_stand, Computer, thingiverse, stl
9
9.0
Apr 7, 2021
04/21
by
Irakli Keshelashvili (ikeshel)
data
eye 9
favorite 0
comment 0
This is a MacBook Pro 15 inch with Retina Display table holder. Dimensions, footprint: 140x30mm; height: 100mm; gap: 19mm
Topics: macbook_pro, Office, stl, thingiverse, MacBook
4
4.0
Apr 8, 2021
04/21
by
C Alvarez (cesalv)
data
eye 4
favorite 0
comment 0
Support piece to hang the 60w Macbook charger instead of having it on the floor around. Its designed to fit the 60w version (the one I own), if you tell me your charger dimensions on comments, I can modify it to fit 45w or 85w ones.
Topics: stl, macbook_charger, thingiverse, Computer, macbook
4
4.0
Mar 16, 2021
03/21
by
Afron Orana (afronorana)
data
eye 4
favorite 0
comment 0
I was looking for a design like this, and I found the closest thing to my idea [here](https://www.thingiverse.com/thing:3720420). After I printed it I realized that it is not suitable for Macbook Pro 13 inch. The laptops body was too thick to fit in. So I decided to create a version that fits Macbook Pro, is a little bit wider to add stability, and that uses less PLA. Since this is my first make, feedback is more than welcome!
Topics: laptop_stand, asus, macbook_pro_stand, macbook_stand, thingiverse, macbook_holder, Computer,...
4
4.0
Sep 14, 2021
09/21
by
KCR 003 (KCR003)
data
eye 4
favorite 0
comment 0
Dock for MacBook Pro Retina 13" or 15" 2015.
Topics: stl, Retina_Macbook_Pro, MacbookProRetina, thingiverse, apple, macbook_pro, macbook,...
8
8.0
Jun 20, 2021
06/21
by
Zachary Schroeder (Zachary175)
data
eye 8
favorite 0
comment 0
I only make things that I would use and are useful. Version without designers name is in the link: https://www.redpah.com/profile/6811/dakotasage-com Enjoy.
Topics: MacBook_Air_stand, thingiverse, macbook_air, Office, macbook_air holder, stl
3
3.0
Mar 16, 2021
03/21
by
Casual Crafting (CasualCrafting)
data
eye 3
favorite 0
comment 0
I've remade this to fit my MacBook Pro 13". Doesn't require any glue. You just put it together and disassmble it as you go. Also fits Macbook Pro Retina 15" and other Laptop models. Print it in 3 seperate parts.
Topics: laptop_stand, macbook_stand, thingiverse, Computer, laptop, macbook, laptop_accessories,...
