5
5.0
Mar 17, 2021
03/21
by
Craig Bartoshesky (ctb5009)
data
eye 5
favorite 0
comment 0
This is an organization tray to keep the pins separate when practicing lock picking.
Topics: lockpicking, stl, Organization, thingiverse
4
4.0
Mar 12, 2021
03/21
by
Markus Eckl (Phreak87)
data
eye 4
favorite 0
comment 0
this parts are needed to build your own plug spinner: (if you picked a lock you can jump over the pin-line) 1. Print all parts 2. put the cylinder parts together (leave place for the spring) 3. put two springs inside the mechanism (this can be tricky) 4. take a lighter and melt the bolt 5. Press the melted part down with a metall so that the two rings can move freely. 6. Mount the key on the side with a M3 screw. Now you can tighten the spinner until the lock is set and push the button to...
Topics: stl, thingiverse, lockpicking, Tools
10
10.0
Jan 10, 2021
01/21
by
Ryan McGarity (quasimorte)
data
eye 10
favorite 0
comment 0
Updates to the Education Lock and Pin set. I added a back plate to the stator file to make it easier to use and not have the cylinder fall through. I added a thumb tab to the cylinder to make it easier to add tension to the cylinder.
Topics: thingiverse, Other, lockpicking, stl
3
3.0
Apr 28, 2021
04/21
by
Gudrun Olafs (gbit)
data
eye 3
favorite 0
comment 0
Simple laser cut pinning tray for lockpicking
Topics: Hobby, stl, thingiverse, lockpicking
6
6.0
May 1, 2021
05/21
by
A L (CaptainHookNr1)
data
eye 6
favorite 0
comment 0
Works with 4x M6 nuts and screws (Length of the screws should be at least the lock thickness + 12mm). Print it a little stronger so you can clamp it in a vice firmly. The ..._stronger version has built in 0.05mm slots that should trick your slicer to add walls inside the part to make it withstand higher clamping forces I added a stand to prevent the vice mount from tipping over. It also has an oversized slot that probably works with all keys if you reduce its size accordingly (with a V shaped...
Topics: stl, thingiverse, Engineering, lockpicking
Designed by Schuyler Towne, this collection of Lockpick etching templates were created in accordance with a Kickstarter initiative to create a lockpicking company. The company did not come to fruition, and these plans are being released to the world under an open license.
Topics: lockpicks, lockpicking, cad, etching
4
4.0
Mar 22, 2021
03/21
by
Markus Eckl (Phreak87)
data
eye 4
favorite 0
comment 0
clip your opener card to this tool to become more grip. You can use this tool also as an Impression Key Handle. For this Use the new key, tighten it and then heat the Key up with a lighter, so that the Plastic can Melt over the Key. This gives the strongest Handle and doesnt bind to the printed parts. After this Step you can use this for other Keys with the same dimensions.
Topics: thingiverse, lockpicking, stl, Tools
6
6.0
Mar 24, 2021
03/21
by
Markus Eckl (Phreak87)
data
eye 6
favorite 0
comment 0
helper utility to open keysafe boxes like in this video: https://www.youtube.com/watch?v=8pVz69A0R5g Blender file created with Blender 2.8.
Topics: stl, lockpicking, Tools, thingiverse
5
5.0
Mar 22, 2021
03/21
by
Markus Eckl (Phreak87)
data
eye 5
favorite 0
comment 0
With this you can bend your own Tension tools from a wiper blade
Topics: thingiverse, lockpicking, stl, Tools
7
7.0
Mar 8, 2021
03/21
by
Markus Eckl (Phreak87)
data
eye 7
favorite 0
comment 0
Manual Lockpick Gun (Design) This Design is not working at the Moment!
Topics: lockpicking, stl, thingiverse, Keychains
5
5.0
Mar 22, 2021
03/21
by
Markus Eckl (Phreak87)
data
eye 5
favorite 0
comment 0
Shim Supports
Topics: thingiverse, lockpicking, stl, Tools
5
5.0
Mar 18, 2021
03/21
by
Markus Eckl (Phreak87)
data
eye 5
favorite 0
comment 0
this tool can help to tighten a key for key-impressioning. tighten the key into the handle and heat it up with a lighter for a nice imprint. after that remove the key and let it cool down. now you have a very strong support for this key shape. This tool can be useful for bumping too. make a nice imprint and then bump it.
Topics: thingiverse, lockpicking, Tools, stl
11
11
Jan 10, 2021
01/21
by
Stephen Bailey (Stephen)
data
eye 11
favorite 0
comment 0
It'll hold your lockpicks. It might even be able to hold your pens. My scientist say its possible but we haven't tested pens yet.
Topics: thingiverse, Hobby, lockpicking, stl
2,034
2.0K
Sep 26, 2012
09/12
by
Schuyler Towne
data
eye 2,034
favorite 1
comment 0
Designed by Schuyler Towne, this collection of Lockpick etching templates were created in accordance with a Kickstarter initiative to create a lockpicking company. The company did not come to fruition, and these plans are being released to the world under an open license. The files are located in a .ZIP archive. Click on "All Files: HTTPS" on the left, or click here to browse the directory.
Topics: lockpicks, lockpicking, cad, etching
3
3.0
Mar 22, 2021
03/21
by
Markus Eckl (Phreak87)
data
eye 3
favorite 0
comment 0
Put 2 or 4 springs in and tighten via a 6906RS bearing
Topics: thingiverse, lockpicking, stl, Tools
5
5.0
May 1, 2021
05/21
by
Jason Alderman (translucent1)
data
eye 5
favorite 0
comment 0
I designed this handle for [Southord slimline picks](https://www.southord.com/collections/individual-slimline-euro-lock-picks), although it should work for any picks 8mm wide and around 0.7mm thick. To get the plastic to adhere to the pick handle I coated the top side of it in hairspray. I also enabled ironing to get a smooth surface for the pick to rest on and used a small amount of CA glue when inserting the handle into the print. Either use 0.1mm layers or turn on adaptive layer height with...
Topics: stl, Hobby, lockpicking, locksport, thingiverse
6
6.0
Mar 22, 2021
03/21
by
Markus Eckl (Phreak87)
data
eye 6
favorite 0
comment 0
Bumpkey Hammer
Topics: thingiverse, lockpicking, stl, Hand Tools
3
3.0
Oct 15, 2021
10/21
by
imagitronics maker (imagitronics)
data
eye 3
favorite 0
comment 0
This is a Mortise Lock Holder for Locksport practice. It works with locks such as the Schlage-compatible locks that Sparrows ships with their [Sceptre],(https://www.sparrowslockpicks.com/product_p/kiltar.htm) or the [CI Practice Lock](https://covertinstruments.com/collections/training-gear/products/ci-practice-lock) from Covert Instruments. The design is heavily based on [The Universal Lock Holder](https://www.thingiverse.com/thing:3115194/files) by Trekmaster30, but I started from scratch, and...
Topics: thingiverse, stl, locksport, lockpicking, Tools
5
5.0
Apr 1, 2021
04/21
by
Morgan Bovat (ODG3dPrinting)
data
eye 5
favorite 0
comment 0
This is a pinning tray for all you lock pickers out there. With 8 slots to place various pins, a tray for the guts of the lock and a special tray with a slot for the key to remain in the locking mechanism itself this is a must have for any lock picking enthusiast
Topics: lockpicking, thingiverse, lockpick, Hobby, stl
6
6.0
Apr 1, 2021
04/21
by
WX xy (ARCxx)
data
eye 6
favorite 0
comment 0
This is a duracam key generator. you need to enter in the cut depths (cut_d), angle (either 20,0,-20) for each cut, and if the cut is fore or aft of the center line for each cut. Note that because of the cut profile and the fact it's 3d printed the absolute cut depths won't be exactly the same as a true key (they'll be somewhat deeper ~0.4mm maybe). You'll have to try out a few variations on cut depths. That said the relative cut depths should stay the same so you don't have to try out...
Topics: lockpicking, Household, thingiverse, key, stl
4
4.0
Apr 1, 2021
04/21
by
David (erplanes)
data
eye 4
favorite 0
comment 0
Print on end. I used a .2 layer height but should work well at any setting. Tested with an NSFO Duo
Topics: locksport, lockpicking, thingiverse, Other, stl
3
3.0
Oct 14, 2021
10/21
by
Joe Picks (JoePicks)
data
eye 3
favorite 0
comment 0
This is a lock disassembly tray with storage box. I modified one of the trays posted by Bosnianbill to serve as the tray and lid. Can be printed in any material you prefer.
Topics: Hobby, thingiverse, stl, locksport, lockpicking
4
4.0
May 1, 2021
05/21
by
Jason Alderman (translucent1)
data
eye 4
favorite 0
comment 0
Retaining clip for Assa 700. When it's time to gut, insert your key or a screwdriver into the slot and easily pull the clip off.
Topics: stl, Hobby, lockpicking, locksport, thingiverse
5
5.0
Jan 4, 2021
01/21
by
Markus Eckl (Phreak87)
data
eye 5
favorite 0
comment 0
Tension tool for lockpicking starters. better view of the tension you apply (left and right) to build take two springs and insert between the 2 parts. take two screws to fix the top part to the bottom part. make sure the surface is fine (take sandpaper) and print in the highest quality to avoid scrubbing the springs to the printed parts.
Topics: lockpicking, Hand Tools, stl, thingiverse
4
4.0
May 1, 2021
05/21
by
Jason Alderman (translucent1)
data
eye 4
favorite 0
comment 0
Holder for key in knob lock cylinders
Topics: stl, Hobby, lockpicking, locksport, thingiverse
3
3.0
May 1, 2021
05/21
by
Jason Alderman (translucent1)
data
eye 3
favorite 0
comment 0
A stand for your Peterson lock picks. Blue filament: https://store.3dsolutech.com/real-blue-pla/ Purple filament: https://store.3dsolutech.com/real-purple-pla-filament/ Gray filament: https://www.amazon.com/gp/product/B07PDW8QWJ Black filament: https://www.amazon.com/OVERTURE-Filament-Consumables-Dimensional-Accuracy/dp/B07PGY2JP1 Assemble the parts with a bit of glue.
Topics: stl, Hobby, lockpicking, locksport, thingiverse
4
4.0
May 1, 2021
05/21
by
Jason Alderman (translucent1)
data
eye 4
favorite 0
comment 0
A simple slip fit holder for 6 or 7 pin SFICs. There's no retention for the control lug so you can just push out the lock when you're done. This is designed to be a snug fit so you may need to experiment with scaling up or down by a fraction of a percent to get a perfect fit.
Topics: stl, Hobby, lockpicking, locksport, thingiverse
4
4.0
Apr 1, 2021
04/21
by
Udo Hermann (PhysUdo)
data
eye 4
favorite 0
comment 0
I made a small holder to hold a lock to practice lockpicking skills.
Topics: thingiverse, Lockpicking, Lockpick, Tools, stl
3
3.0
Mar 24, 2021
03/21
by
Markus Eckl (Phreak87)
data
eye 3
favorite 0
comment 0
Key impression tool
Topics: stl, lockpicking, Hand Tools, thingiverse
4
4.0
Oct 14, 2021
10/21
by
Joe Picks (JoePicks)
data
eye 4
favorite 0
comment 0
I made this remix to create a better fit for my Sparrows lock picks. There are 3 sized, .015, .020, and .025. I print these on both a Flashforge Finder and Creality Ender 3 Pro. I prefer to print them vertically and doing so requires a raft.
Topics: Hobby, thingiverse, stl, locksport, lockpicking
4
4.0
May 1, 2021
05/21
by
Jason Alderman (translucent1)
data
eye 4
favorite 0
comment 0
A holder for euro profile cylinders in 3 different lengths.
Topics: stl, Hobby, lockpicking, locksport, thingiverse
4
4.0
Mar 22, 2021
03/21
by
Markus Eckl (Phreak87)
data
eye 4
favorite 0
comment 0
Heat old cards, give it into the press and make a door case skid from it
Topics: thingiverse, lockpicking, stl, Hand Tools
4
4.0
Mar 5, 2021
03/21
by
Markus Eckl (Phreak87)
data
eye 4
favorite 0
comment 0
Optimized version of the MakerMatic lockpick gun. (https://www.thingiverse.com/thing:1979114) - Created a additional Blender file to edit single parts. - Better print results by adjusting the oscilator and motor holder part. - unsharpen edges to avoid blocking the Oscilator - 2 cam version (small, large to adjust movements) - oscilator mounts replacable - better battery compartment the latest part-versions can be exported from Blender-file as stl. use a sandpaper after printing to make it...
Topics: stl, lockpicking, Hand Tools, thingiverse
3
3.0
Oct 14, 2021
10/21
by
Joe Picks (JoePicks)
data
eye 3
favorite 0
comment 0
This a simple holder for a Schlage Everest FSIC core. It can be used to pick in hand or in a vise. Removing the core is made easy with a hole in the back so the core can be pushed through. If you have the key to the core you can just the key to remove it as well.
Topics: Hobby, thingiverse, stl, locksport, lockpicking
6
6.0
Jan 8, 2021
01/21
by
Markus Eckl (Phreak87)
data
eye 6
favorite 0
comment 0
2 in 1 pick-tool for Abus locks. beta - needs to be engraved by someone and tested.
Topics: lockpicking, Hand Tools, stl, thingiverse
5
5.0
May 1, 2021
05/21
by
Alexandre TRIFFAULT (FrenchKey_fr)
data
eye 5
favorite 0
comment 0
This box is designed to place the pins of a pin tumbler lock including key pins, the master wafers if any, driver pins, and springs for easy carrying of a dismantled cylinder. It closes very securely, no risk of unwanted opening. INSTRUCTIONS to build : 1/ Print both parts, 2/ Cut a 40mm long, 1.75 mm in diameter plastic filament (basically the same filament you printed the box with), 3/ Insert the wire as an axis of the hinges, 4/ Heat up the ends of the hinges (with a lighter or a soldering...
Topics: stl, Parts, lockpicking, thingiverse, pentesting
The Complete Guide To Lockpicking.
Topics: lockpicking, complete, guide, safety, home
3
3.0
Jun 11, 2021
06/21
by
MATTHEW CARLSON (coplate)
data
eye 3
favorite 0
comment 0
I have been watching a lot of YouTube videos about locksport, and ordered a practice core. It is just the bare metal, and is too small to comfortable hold, so I measured it, and made a holder for it. I made is just a little on the small size for the lock I had bought, so I could heat it with a heat gun, and put the core in to hold it tight.
Topics: Lock, thingiverse, lockpicking, Hobby, stl
5
5.0
Jan 21, 2021
01/21
by
Jimy Longs (jimylongs)
data
eye 5
favorite 0
comment 0
Designed to fit the part of an American Series 5570 or 6570.
Topics: lockpicking, locksport, thingiverse, Hobby, stl
4
4.0
Mar 9, 2021
03/21
by
Matt Burrough (mburrough)
data
eye 4
favorite 0
comment 0
A 94% scale version of Jimy's KIK Vice Holder, for slightly smaller KIK cylinders. (See https://www.assalock.com/Other/assalockCOM/Downloads/KIK/ASSACatalogue%20KIK-KIL%20Section.pdf for example KIK size variations.)
Topics: stl, thingiverse, lockpicking, locksport, Hobby
5
5.0
Apr 30, 2021
04/21
by
Squidgy Plastic (SquidgyPlastic)
data
eye 5
favorite 0
comment 0
A quick design for lock pick handle done in Open SCAD. You can modify the variables at the top of the file to suit the size of handle you want as well as the metal insert you are using. Printed on Prusa Mk3 @ 0.2mm layer height with no supports. Can use PLA, ABS, PETG etc
Topics: stl, thingiverse, Hand Tools, lockpicking
5
5.0
Mar 22, 2021
03/21
by
Markus Eckl (Phreak87)
data
eye 5
favorite 0
comment 0
This Project can be used different ways: 1. Take a Picture of a physical key and overlay the svg file to read the codes. 2. Put the physical Key on the printed svg (via incscape) and read the codes. insert the Code in the Scad file and print the STL File. This is your key-Copy! ONLY USE FOR YOUR OWN LOCKS!
Topics: thingiverse, lockpicking, stl, Hand Tools
5
5.0
Mar 22, 2021
03/21
by
Markus Eckl (Phreak87)
data
eye 5
favorite 0
comment 0
With this you can fast decode any key cutting depths
Topics: thingiverse, lockpicking, stl, Hand Tools
4
4.0
Jan 8, 2021
01/21
by
Amon Lanz (CaptainHookNr1)
data
eye 4
favorite 0
comment 0
Brief explanation at 6:06: https://www.youtube.com/watch?v=exaBQbJ_BKE
Topics: locksport, stl, lockpicking, thingiverse, Engineering
7
7.0
Apr 20, 2021
04/21
by
gardien degarni (gardien)
data
eye 7
favorite 0
comment 0
Pour fabriquer vos propres crochets avec des lames d’essuie glaces.
Topics: thingiverse, stl, crochetage, Other, lockpicking
4
4.0
May 1, 2021
05/21
by
Jason Alderman (translucent1)
data
eye 4
favorite 0
comment 0
A follower for gutting Assa 700's. Print with supports and go slow with max cooling to get the fine detail.
Topics: stl, locksmithing, Hobby, lockpicking, locksport, thingiverse
4
4.0
Mar 9, 2021
03/21
by
Matt Burrough (mburrough)
data
eye 4
favorite 0
comment 0
A holder for euro cylinder locks. Good for picking or impressioning. Locks can be inserted locked or unlocked, and can be secured using an M5 screw, ~30mm in length.
Topics: stl, thingiverse, Lock, lockpicking, locksport, Hobby
3
3.0
Jan 7, 2021
01/21
by
Amon Lanz (CaptainHookNr1)
data
eye 3
favorite 0
comment 0
-PickStand_steps has the three rows at different heights so the picks in the back stick out a little more. -Pickstand_ThinBottom has everything on the same height. Saves infill and prints faster -PickStand_noInfill: This one was designed to print faster. It took me 2h 20min to print it with a 1mm nozzle and 0.8mm layerheight (which are the optimal settings I had in mind during construction). This derivation is designed to have very little slow printing details so you can play with overheating...
Topics: locksport, stl, Hobby, lockpicking, Locksmith, thingiverse
7
7.0
Jan 20, 2021
01/21
by
Brent Collier (Trekmaster30)
data
eye 7
favorite 0
comment 0
5 plug followers plus stand to keep your workspace organized.
Topics: lockpicking, locksport, thingiverse, Tools, Locksmith, stl
7
7.0
Apr 19, 2021
04/21
by
Brent Collier (Trekmaster30)
data
eye 7
favorite 0
comment 0
Smaller square shaped pinning tray. Great for building challenge locks.
Topics: thingiverse, stl, lockpicking, locksport, Tools, Locksmith
