Só delhe nessa tranca
Topic: Lockpick
4
4.0
Jan 9, 2021
01/21
by
WX xy (ARCxx)
data
eye 4
favorite 0
comment 0
This is a two part abloy disc detainer pick handle. See the design for the printed parts here: https://www.youtube.com/watch?v=ay2D1Ouu9IE&lc=UgyP44dW2RCn0eNr5uV4AaABAg
Topics: thingiverse, stl, lockpick_handle, DIY, lockpick
10
10.0
Mar 9, 2021
03/21
by
Bruce NOYB (Still_Breathing)
data
eye 10
favorite 0
comment 0
### A Handles for Lock Picking tool's similar to Credit Card style Picks ### A Handles for Picks with handles... There are several on Thingiverse but, I needed a 'Man Size' handle - meaning, not thin and small. It fit's in a hand and seats nicely into the thumb-first finger crotch... see photo. ## UPDATED: ### Cleaned and Organized files and names. Eliminated older versions. Updated/Tweaked .stl files and ensured they are 'Healed' • Handles for Credit-Card style picks • Handle for...
Topics: lockpick_handle, stl, thingiverse, lockpick, DIY
11
11
Jan 18, 2021
01/21
by
Chris Takahashi (cnt)
data
eye 11
favorite 0
comment 0
Takes picks made from 0.8mm thick wiper inserts. Can edit the stl file for different sizes make sure to account for shrinkage in the hole. Optionally, you can print this in three pieces and glue/solvet weld them together. This may help if bed adhesion is insufficient to print something so tall.
Topics: lockpicking, locksport, thingiverse, lockpick, lockpick_handle, Hobby, stl
6
6.0
Jan 6, 2021
01/21
by
ben renn (trueoink)
data
eye 6
favorite 0
comment 0
made for the cheap credit card lockpick set. it should hold the lock picks and prevent them from falling out. it should also be slimmer.
Topics: stl, lockpick, wallet lockpick, wallet, thingiverse, Gadgets
7
7.0
Mar 31, 2021
03/21
by
WX xy (ARCxx)
data
eye 7
favorite 0
comment 0
There are two pieces the organizer and the inserts. the organizer has a normal and "nostick" version. If you have a sticky bed like buildtak you may want nonstick given the large flat bottom. It made removal a lot easier for me. The inserts right now come in two flavors: a dual insert for no-handle SouthOrd style picks a single insert for the smaller metal handle SouthOrd style picks. The inserts without a hole were made to fit peterson picks with their plastic handles. The long...
Topics: lockpick_stand, lockpicking, thingiverse, lockpick, Hobby, stl
4
4.0
Mar 5, 2021
03/21
by
Heikki Juva (zokol)
data
eye 4
favorite 0
comment 0
Handle for Multipick ELITE G-PRO dimple picks
Topics: stl, Hand Tools, lockpick_handle, lockpicking, lockpick, thingiverse
13
13
Jan 15, 2021
01/21
by
Ma Team 3D (Ma-Team-3D)
data
eye 13
favorite 0
comment 0
Drawing by Raoul LOPES for MaTeam3D (Facebook group - Ma Team 3D).https://www.facebook.com/groups/258346991299293/?ref=bookmarks LMS : Lockpicking modular Suport. Cet objet est un support évolutif et modulaire. Créé pour intégrer une tête pour s’entraîner au crochetage de cylindres de serrure de type Européen, il va intégrer d'autres modules à venir pour y fixer des appareils photos, des caméras, tablettes, étaux, ..... Il est 100% imprimable, sans aucune pièce métalique. Il...
Topics: Tools, thingiverse, stl, lockpick_handle, lockpicking, lockpick
5
5.0
Jan 6, 2021
01/21
by
Petter Jysky (segapus)
data
eye 5
favorite 0
comment 0
The picks that I used for these handles are the ones in a credit card form factor from Lock Cowboy, and where included in a kit with a training lock brought up on amazon. With these handles and some sanding on the metal edges of the picks themselves they actually make a quite descent addition to your tool collection. Used https://www.thingiverse.com/thing:1123385 by Uncle as inspiration for this but I decided to make some modifications to the design of my own: First off its a bit longer. 82mm...
Topics: Hand Tools, stl, lockpick, lockpicking, thingiverse, lockpick_handle
5
5.0
May 20, 2021
05/21
by
Matt Ross (kiswa)
data
eye 5
favorite 0
comment 0
Broke one of the handles on a Pandora pick from mad.bob and needed a replacement. There are no threads in the design, so you need to use a little elbow grease with the original machine screws to thread them before assembly. It's not perfect, but it's pretty good.
Topics: mad.bob, lockpicking, thingiverse, lockpick, Hobby, stl, lockpick_handle
3
3.0
Jan 19, 2022
01/22
by
William Bushee (bluemonkeydev)
data
eye 3
favorite 0
comment 0
Simple handle for a lockpick. I used a few dabs of superglue and a careful hand to bound them to the picks. Worked amazingly well. Hit me up if your pick style is a bit different.
Topics: thingiverse, handle, Hand Tools, lockpick, lockpicking, lockpick handle, stl
8
8.0
Jan 19, 2021
01/21
by
Christopher Tyler (ctyler2621)
data
eye 8
favorite 0
comment 0
This will hold an SFIC core perfectly with or without the control key. If you have the control key use one side and if you don't just turn it around and the control bar will hold the core in place with friction. It will wear down over time and become less tight but it's still suitable for picking. Lock sits flush with the face of the holder and it works with 5 to 7 pin SFIC cores. I have printed this and it works perfectly. Version7 fixed the STL orientation so that no editing is required to...
Topics: lockpicking, Lock, thingiverse, lockpick, Locksmith, Hand Tools, lockpick_stand, stl
11
11
Mar 17, 2021
03/21
by
DROP DB (DROP_DB)
data
eye 11
favorite 0
comment 0
I needed something other an a haphazard pile to keep my picks in, so I whipped this up in TinkerCAD. Holds 13 picks and 6 tension tools.
Topics: Tool Holders & Boxes, lockpicking, lockpick, stl, lockpick_stand, thingiverse
9
9.0
Mar 16, 2021
03/21
by
Tony Virelli (tvirelli)
data
eye 9
favorite 0
comment 0
This is a pick handle that is specifically created for use with wiper blades. It prints as 1 piece and you simply put either super glue or epoxy into the hole in the top, then insert your wiper blade pick. It is the same size as a standard Peterson Lock Pick handle.
Topics: locksport, Lock, lockpicking, lockpick, stl, lockpick_handle, thingiverse, Hand Tools
5
5.0
Apr 2, 2021
04/21
by
Malcolm Diamond (Lockology)
data
eye 5
favorite 0
comment 0
* * * * UPDATE - NEW FILES * * * * Since posting these i was messages asking for a couple of more options. So i have now included them as follows:- A new checkered option where the sides are checkered like the peterson picks... If you want to print these flat DO NOT use a raft, you will never get them off, I printed mine upright with no problems. I moved them to a seperate thing file, search for sparrows lockpick handles And the last was a request for a handle that would fit a .5" ( 1/2...
Topics: lockpick_handle, handles, lockpicking, thingiverse, lockpick, dragon, Hand Tools, stl
5
5.0
Mar 17, 2021
03/21
by
Tony Virelli (tvirelli)
data
eye 5
favorite 0
comment 0
I'm now selling these on my website! https://www.3dlocksport.com/products.php#!/Double-Deadbolt-Holder/p/158655713/category=39551008 This is a holder that you can insert 2 Kwikset deadbolts into. In mine, I actually changed the key pins in one of the deadbolts so I have 2 different locks to pick in a single unit. This works with the included hardware screws that come with the deadbolt.
Topics: locksport, lock_sport, lockpicking, lockpick, stl, lockpick_stand, thingiverse, lock_picking, Hobby
5
5.0
Apr 1, 2021
04/21
by
Morgan Bovat (ODG3dPrinting)
data
eye 5
favorite 0
comment 0
This is a pinning tray for all you lock pickers out there. With 8 slots to place various pins, a tray for the guts of the lock and a special tray with a slot for the key to remain in the locking mechanism itself this is a must have for any lock picking enthusiast
Topics: lockpicking, thingiverse, lockpick, Hobby, stl
2
2.0
Jan 18, 2022
01/22
by
Gael Lafond (gaellafond)
data
eye 2
favorite 0
comment 0
Handle for the cheap lock picks we get from sellers such as eBay
Topics: lockpick_handle, openscad, thingiverse, handle, Hand Tools, lockpick, lockpicking, stl, locksport
3
3.0
Apr 2, 2021
04/21
by
Malcolm Diamond (Lockology)
data
eye 3
favorite 0
comment 0
OK, these are the last pick handles I'm making for a while... These were requested from a member, who asked if i could make a regular sized Pick Handle so that he could still use the cases he had, as my more stylized versions are too long for the Vorax and Monstrum Cases. Fair point... So here they are. Two models, one plain checkered the other with the Sparrows name on it. on top of that Ive made them in 75mm depth and 80mm depth for the handle to fit in... both and .030 inch width so they...
Topics: lockpick_handle, lockpicking, thingiverse, lockpick, Sparrows_Lock_Pick, sparrows, Hand Tools, stl
7
7.0
Apr 18, 2021
04/21
by
Thomas Wenzel (redcatimaging)
data
eye 7
favorite 0
comment 0
These are two of my 3D handles, made especially for the Sparrows Monstrum picks (like Tron, Attila etc...), but they fit also the standard ones, which are a bit smaller on the handle. The designs are made as 2-part prints, printed in PLA, which have to be glued. I use UHU Plast Special (special plastic model glue), which works fine. You need additionally 2 setscrews in M4x3 to hold the pick in the handle. The advantage of these designs is, that you can exchange the pick whenever you want, or...
Topics: lockpicking, lockpick_handle, Sparrows_Lock_Pick, thingiverse, stl, Sparrows, DIY, locksport,...
6
6.0
Jan 3, 2021
01/21
by
DROP DB (DROP_DB)
data
eye 6
favorite 0
comment 0
This package includes handles for picks in 0.015 and 0.020 thickness, in horizontal and vertical orientations. The horizontal models provide a smoother feel, and the vertical models provide a more grippy feel. If you want to sand them after printing, then it doesn't matter which you use, but don't rotate the models yourself to change orientation -- use the appropriate already-oriented models instead, as the fitment tolerances are very tight and the two different orientations are sized slightly...
Topics: Tools, stl, lockpick, thingiverse, lockpicking, sparrows, handle, Sparrows_Lock_Pick,...
4
4.0
Jan 4, 2021
01/21
by
Adam Koch (aakoch)
data
eye 4
favorite 0
comment 0
A collapsing handle for my homemade comb pick.
Topics: Parts, lockpick_handle, stl, thingiverse
4
4.0
Mar 31, 2021
03/21
by
DROP DB (DROP_DB)
data
eye 4
favorite 0
comment 0
I found it difficult to use the end cap wrench on the end of the [resin plug follower](https://www.sparrowslockpicks.com/product_p/rpf.htm) included with my [Sparrows practice locks](https://www.sparrowslockpicks.com/product_p/qprolok.htm) because it's so smooth and hard to grip while twisting. So, I made this more hefty version with EZ-Grip technology. Also made a verbatim copy of the plug follower just because.
Topics: locksport, lockpicking, thingiverse, lockpick, Tools, stl
9
9.0
Apr 26, 2021
04/21
by
Graham Heath (grahampheath)
data
eye 9
favorite 0
comment 0
Before you make your round lock pick, consider its rectangular sister model. You might perfer that one, you might prefer this one. Up to you. This round lock pick generator can make an infinite number of different lock pick shapes. Triangle? Sure! Square? Why not! Rounded? You bet! Its up to you! This is for home made picks and for purchased sets like the South Ord PHX-17 which features a interchangeable handle and many picks you screw into the handle. With this file you'll be able to print...
Topics: customizer, thingiverse, Hand Tools, customizable, Lock_pick, lockpick, stl, lockpick handle,...
3
3.0
Aug 9, 2021
08/21
by
THOMAS DYSON (Thom_3D)
data
eye 3
favorite 0
comment 0
Updated to include the back storage for picks without handles and some tension wrenches. Remixed from the make by forestqc69.
Topics: stl, lockpick_stand, Organization, thingiverse
4
4.0
Apr 1, 2021
04/21
by
Udo Hermann (PhysUdo)
data
eye 4
favorite 0
comment 0
I made a small holder to hold a lock to practice lockpicking skills.
Topics: thingiverse, Lockpicking, Lockpick, Tools, stl
5
5.0
Jun 11, 2021
06/21
by
Rik Kershaw-Moore (tsiolkovsky)
data
eye 5
favorite 0
comment 0
This holder has been designed to enable lockpickers to orient a lock at 0, 45, 90, 135, 180, 225, 270, and 315 degrees. It was designed to test if there is an orientation that locks pick best at. The build comprises of: 1 x Inner 1 x Outer 2 x Chocks - this is to prevent the inner holder from sliding out of the outer holder. 2 x Bars - one for the front of the lock and one for the rear. To attach the bar you will need 4 x 15mm M3 Screws
Topics: stl, thingiverse, Other, lockpick, locksport
2
2.0
Aug 22, 2021
08/21
by
Justin Anthony (justinmcslappy)
data
eye 2
favorite 0
comment 0
Designed this stand to display a Scandi Oval lock cylinder.
Topics: lockpicking, lockpick_stand, Hobby, stl, thingiverse
3
3.0
May 20, 2021
05/21
by
William Powell (dcs_sheepdog)
data
eye 3
favorite 0
comment 0
Pretty basic and straightforward. This is my first design to be shared on Thingiverse. I recently bought a set of Dangerfield Praxis lock picks. I love the picks but wanted a handle for them. Here's a basic handle for the Dangerfield Praxis picks with a window showing the Dangerfield Praxis name and another window showing the pick thickness. I printed the handle pictured on an Ender 3 Pro, .2mm height, no supports or raft. If you have any suggestions please let me know! Thanks!
Topics: Tools, lockpicking, thingiverse, stl, lockpick_handle
3
3.0
Jun 11, 2021
06/21
by
Alexander Plutt (Plutt)
data
eye 3
favorite 0
comment 0
Эксперимент по проектировантю самонаборного ключа и сопутствующих инструментов для вскрытия цилиндровых замков с вертикальной фрезеровкой ключа. На рынке продается масса изделий для этих целей, а мне было интересно можно ли получить что-то подобное "на коленке"....
Topics: Tools, stl, thingiverse, lockpicking, lockpick, locksport
6
6.0
Jun 19, 2021
06/21
by
mario mustermann (anunique)
data
eye 6
favorite 0
comment 0
just another lock pick rack
Topics: stl, thingiverse, Tool Holders & Boxes, lockpick
6
6.0
Mar 4, 2021
03/21
by
Jeff McCray (Maddogrecurve)
data
eye 6
favorite 0
comment 0
I designed this for a friend, BLP60, the version he is getting has his name on it. I designed it on Fusion 360 and then put his name on it in Tinkercad. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/cx7MGCXBP3Y
Topics: 3D Printing, stl, holder, lockpick_stand, organization, station, locksmith, pick, stand, storage,...
8
8.0
Apr 19, 2021
04/21
by
Brent Collier (Trekmaster30)
data
eye 8
favorite 0
comment 0
**Edit** redesigned to reduce material and removed some strange artifacts in the design. This is a very large stand for lockpicks. Requires a print bed of at least 300x300mm in slicing program rotate bed horizontally 45 degrees to fit on bed. I printed with .2mm layers 15% infill and 2 wall layers and it came out great. This stand can be scaled down some if needed. The holes are extra large to accommodate custom pick handles.
Topics: thingiverse, stl, lockpicking, lockpick, lockpick_stand, locksport, rack, holder, Locksmith,...
5
5.0
Apr 8, 2021
04/21
by
(DarkSpark2099)
data
eye 5
favorite 0
comment 0
i just traing to print a funcional key, and i have good results. :) VIDEO: https://www.youtube.com/watch?v=CpFoBvRcJWE
Topics: lockpick, hack, stl, Other, thingiverse, lockpiking
6
6.0
Jun 20, 2021
06/21
by
RaspPiGuy (RaspPiGuy)
data
eye 6
favorite 0
comment 0
This is a replacement key for @MakeAnything's lockpick puzzles (small size, 1-5). We've had a few keys break as people rotate them too aggressively, so needed replacement keys without reprinting the whole lock puzzle. Printed on it's side, it's extra strong and works well! Find the original puzzles by Devin Montes (@MakeAnything) here: https://www.myminifactory.com/de/object/3d-print-lockpick-puzzle-01-74848 Check out his YouTube channel here -- it's pretty great:...
Topics: puzzle, lockpick, thingiverse, key, Puzzles, stl
9
9.0
Jan 19, 2021
01/21
by
Ryan McCreary (rmccreary0719)
data
eye 9
favorite 0
comment 0
I sorta remixed it but mostly my own design in Inventor. The holes are big enough for followers up to .5 inch.
Topics: organization, pick stand, station, thingiverse, rack, pick, Lockpick, holder, stand, locksmith,...
3
3.0
Jan 6, 2021
01/21
by
Suso SeguridadFísica 3D (SeguridadFisica_3D)
data
eye 3
favorite 0
comment 0
Esta es una bandeja para organizar los elementos internos de una cerradura o candado de discos. Diseñada en Fusion 360 e impresa en filamento. Recomiendo usar PETG, ya que las es más resistente a aceites y disolventes que el PLA. Hay dos bandejas, una con alojamientos inferiores para imanes y otra sin ellos. Se libre de modificarla a tu gusto. Un Saludo. This is a tray for organizing the internals parts of a disc detainer lock or padlock. Designed in Fusion 360 and printed on filament. I...
Topics: stl, locksport, Hobby, lockpick, lockpicking, Lock, thingiverse
4
4.0
Apr 4, 2021
04/21
by
Dominic Villeneuve (dvilleneuve)
data
eye 4
favorite 0
comment 0
This is a handle for your homemade lockpick tools. Use a car wiper stainless steel insert to make it, glue it with epoxy to get good pin's feeling. Hot glue will not give you a good result, also superglue is too brittle, so the best is epoxy. Ceci est une poignée pour vos outils de déverrouillage fait maison. Utiliser les lames d'acier inoxydable que l'on retrouve dans les balais d'essuie glace. Coller la pièces d'acier avec de de l'epoxy pour bien ressentir les pins. La colle chaude n'est...
Topics: thingiverse, lockpicking, stl, diy, Hobby, handle, lockpick
4
4.0
Apr 20, 2021
04/21
by
Boris Kozorovitzky (zbzzn)
data
eye 4
favorite 0
comment 0
This is my design for the LPL/BB DD pick design as shown in their video. Note that there are additional steel parts which are part of the pick and cannot be 3d printed. For full instructions and a list of parts watch my video https://www.youtube.com/watch?v=CP_ZcrEla74 You can edit the model directly from OnShape: https://cad.onshape.com/documents/b9580040c8ded7ac07d2a9ec/w/0d1fcc6b109a4b248bff3de3/e/dd9df5276d817daf2d1a367b
Topics: thingiverse, stl, Hand Tools, lockpicking, lockpick, locksport
7
7.0
Mar 3, 2021
03/21
by
anonym anonym (schmiernippel)
data
eye 7
favorite 0
comment 0
Stand for picks !
Topics: holder, rack, organization, station, locklab, lock pick, stand, DIY, thingiverse, locksmith,...
4
4.0
Jun 6, 2021
06/21
by
Matt South (mattymcfatty)
data
eye 4
favorite 0
comment 0
Use this to tap your bump keys. Designed off center to be better-suited for a right-handed person. I included the sketchup file if any lefties want to modify the design.
Topics: Hand Tools, thingiverse, lock_picking, stl, lockpick
6
6.0
Apr 1, 2021
04/21
by
Christopher Olah (colah)
data
eye 6
favorite 0
comment 0
A 3D printable torsion wrench and pick.
Topics: openscad, lock, thingiverse, useful, 3D, Other, stl, lockpick
15
15
Jan 9, 2021
01/21
by
Willie Phistterbut (Phistterbut_Inc)
data
eye 15
favorite 0
comment 0
UPDATE: This has been left by the wayside I'm afraid. The parts will fit together and have enough slop to be effective in the theory of learning to defeat locks, but I never really sourced springs for it. Download and print if you like, but keep this in mind, please. Ever wanted to learn the art and skill of picking a lock? Well, print this and have a go. A fully printable practice lock with tools to teach the theory behind lock vulnerabilities and their defeat. Start with one pin and work your...
Topics: Mechanical Toys, thingiverse, stl, pick, lockpicking, lockpick, Lock
13
13
Mar 21, 2021
03/21
by
Dan Te (Unkle)
data
eye 13
favorite 0
comment 0
Quick and easily printable handle for the cheap pickset you can buy from for example banggood (SKU113026). It's a **frictionfit** and I have not needed any glue but you could give it a drop if it starts feeling loose. The handle will hold picks that are **8mm wide** and **0,5mm thick** the slot depth is 38mm (the pick will protrude 2mm when inserted as illustrated). The printed handle is 8cm long, 4mm thick and 12mm wide.
Topics: ergonomic, stl, Hand Tools, pick, lockpick, handle, thingiverse
5
5.0
Mar 31, 2021
03/21
by
David Cook II (alekii)
data
eye 5
favorite 0
comment 0
This is a set of knurled lockpick handles that are approximately the size of the Peterson handles. There are four different handles provided: 1. A handle without a hole that can have the appropriate size hole cut out for a different pick. 2. A handle for Sparrow's 0.025 picks. 3. A handle for Sparrow's 0.015 picks. 4. A handle for Southern Specialties' 0.020 picks. Print them in the orientation provided in the files, clean them up a bit (e.g., stringing across the hole for the pick), and push...
Topics: lockpick_handle, lockpicking, thingiverse, Hand Tools, stl
5
5.0
Mar 5, 2021
03/21
by
j g (0pamp)
data
eye 5
favorite 0
comment 0
Dimple pick handles for the cheap picks you can find on discount sites. I modeled the slot for the picks so the pick shaft rotates along the center of the handle. I find it gives good feedback. Printed in PETg
Topics: stl, Hand Tools, handle, lockpick, locksport, dimple, thingiverse
3
3.0
Jan 8, 2021
01/21
by
William Preston (gspweim)
data
eye 3
favorite 0
comment 0
This holds your locks and parts so that you can practice lock picking. It was made to use a practice lock that I purchased from LearnLockPicking.com . The fit is tight and directional. If you need to secure the lock further you can use the nut (will probably be blocked by the pins) or the bolt/screw to secure it from the top
Topics: stl, lockpicking, thingiverse, lockpick_stand, Tool Holders & Boxes
3
3.0
Oct 29, 2021
10/21
by
Andrea Eubanks (DreFace)
data
eye 3
favorite 0
comment 0
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/hKsokQ3cHPQ. I printed a few files i found online but couldn't quite get the configuration i wanted so i just made one myself. The holes are sized for Peterson picks. if you want it taller or shorter, adjust your z axis.
Topics: thingiverse, lockpicking, stl, lockpick_stand, 3D Printing
12
12
Jan 14, 2021
01/21
by
Christopher Tyler (ctyler2621)
data
eye 12
favorite 0
comment 0
Simple holder for a "Key in Keyway" or "Key in Knob" (KIK) cylinder to make it easier to practice picking. Could be useful for placing into a vise as well since it's similar in size to a mortise lock with the holder in place. I used an M5 screw to hold the cylinder in place, not necessary for single pin picking, only required if you are raking the lock as it fits fairly loosely in the holder and a quick, forceful rake will easily pull it out.
Topics: thingiverse, stl, lockpicking, lockpick, Hand Tools, Lock
7
7.0
Jan 14, 2021
01/21
by
Thomas Wenzel (redcatimaging)
data
eye 7
favorite 0
comment 0
Simple handles to fit 0.024in Sparrows picks. I also made some for 0.015in ones. They might also fit other brands like Southord picks without metal handles. I once designed them for a friend, but personally I'm using wood ;). They are two part for easy printing, you just need to glue them together with the pick. For a 0.020in pick you can use one half of a 0.015 and one half of a 0.024in handle.
Topics: thingiverse, stl, lockpick_handle, locksport, lockpicking, sparrows, Other
