6
6.0
Mar 20, 2021
03/21
by
John Conelea (ideaform3d)
data
eye 6
favorite 0
comment 0
A 3d model of Jar Jar Binks I created in sculptris. The model was repaired in Meshmixer, and should print ok.
Topics: jatr_jar, stl, star, star_wars_h, Jar_J, Jar_Jar_Bink, Creatures, star_wars, s, wars, jar_jar,...
3
3.0
Apr 28, 2021
04/21
by
Mariano Barella (marianobarella)
data
eye 3
favorite 0
comment 0
Jar holder with small inclination. Designed to hold a jar with board markers. Probably would suit any other application where a small container needs to be fixed to a wall.
Topics: Household, thingiverse, jar, jar_holder, glass_jar, stl
6
6.0
Aug 27, 2020
08/20
by
Center for Accessible Technology in Sign
movies
eye 6
favorite 0
comment 0
ASL vocabulary
Topic: jar
9
9.0
Jan 16, 2021
01/21
by
Loté VR (Lote_VR)
data
eye 9
favorite 0
comment 0
This was printed in: REAL-filament's Neutral PLA ø2.85. Slicer: Cura Placement of object in Cura: Print the part with the top part on the bed so there will only be support on the outside and a little bit of support under the object. Print Settings Quality Layer height: 0.2 mm. Shell Wall Thickness: 1.05 mm. Top/Bottom THickness: 0.8 mm. Infill Infill Density: 30%. Infill Pattern: Grid. Infill Overlap percentage: 20%. Skin Overlap percentage: 20%. Speed Print Speed: 60 mm/s. Travel Speed: 120...
Topics: jar_lid, thingiverse, glass_jar, Containers, jar, stl
Wileyonlinelibrary.com/journal of Accounting Research
Topic: JAR
7
7.0
Aug 27, 2020
08/20
by
Center for Accessible Technology in Sign
movies
eye 7
favorite 0
comment 0
ASL vocabulary
Topic: jar
12
12
Jan 10, 2021
01/21
by
Russell Petersen (rustybaker22)
data
eye 12
favorite 0
comment 0
This is a 'candy-jar' style lid that sits on the jar and has a knob to easily access the contents of the jar. It is designed to print right side up with no support. Printing without support is preferable, so that is the reason for this design. I can add a version that has no interior cylinder for more usable volume inside the jar by request.
Topics: lid, thingiverse, stl, mason_jar, mason, ball_jar, Containers, Kerr, jar, jar_lid
9
9.0
Apr 24, 2021
04/21
by
Kevin Chang (kwc)
data
eye 9
favorite 0
comment 0
honestly I think you might be better off printing the 2 original things separately and gluing them together This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/f9MHfCrxw3m
Topics: 3D Printing, stl, thingiverse, jar_lid, jar_jar_binks
4
4.0
Apr 8, 2021
04/21
by
Rachel Lawson (lokilaufeysen)
data
eye 4
favorite 0
comment 0
made with tinkercad
Topics: jar, Containers, stl, coffee_jar, thingiverse, honey_jar, jars
5
5.0
Mar 22, 2021
03/21
by
Arnie Weber (310weber)
data
eye 5
favorite 0
comment 0
This lid is great for storing things in mason jars.
Topics: Containers, stl, mason_jar, Lid, Mason, Jar, jar_lid, mason_jar_lid, thingiverse
4
4.0
Apr 1, 2021
04/21
by
Lenny Face (LennyFace)
data
eye 4
favorite 0
comment 0
The Famous sculpture of David by Bernini.
Topics: binks, thingiverse, scan, bernini, Sculptures, statue, jar_jar_binks, jar_jar, david, stl
6
6.0
Jan 9, 2021
01/21
by
Tuan Duong (tuduong)
data
eye 6
favorite 0
comment 0
Remix of gblades' mason jar lid. Edited to be a replacement mason jar lid ring. Printed with ASA. Scaled to 102% to account for plastic shrinkage.
Topics: lid, thingiverse, stl, Kitchen & Dining, mason_jar, lid_for_glass_jar, glass_jar, jar
3
3.0
Jun 11, 2021
06/21
by
Patrick Lavelle (NotLikeALeafOnTheWind)
data
eye 3
favorite 0
comment 0
A holder for mason jar lids. There are two sizes regular and wide.
Topics: Organization, canning, mason_jar, thingiverse, jar_lid, ball jar, stl
9
9.0
Apr 30, 2021
04/21
by
Matthew Hinton (matrhint)
data
eye 9
favorite 0
comment 0
This is a simple jar greenhouse I designed in attempts to save a volunteer tomato plant that I found growing in my back yard. It is designed to work with jars typically used for canning. I used a quart jar. There are two models, one with built in steaks, and one with holes--so it can be used with a better mounting device or without any at all. I have found that the steaks are not too strong if infill is too low.
Topics: stl, mason_jar, Outdoor & Garden, greenhouse, thingiverse, ball_jar, jar
14
14
Jan 13, 2021
01/21
by
(BB11)
data
eye 14
favorite 0
comment 0
Weed jar. Update 14.1.2018. I uploaded .SLDPRT files. So if you would like to modified it, feel free to use it...
Topics: thingiverse, weed, weed_jar, stl, marijuana, Containers, marijuana_jar, jar
3
3.0
Mar 25, 2021
03/21
by
(BrokeBot)
data
eye 3
favorite 0
comment 0
Have you ever wanted to set a nice cold one on Jar Jar Binks? Well this is the coaster for you!!! (not for hot coffee) Rose Tico coaster coming soon…
Topics: stl, Food & Drink, thingiverse, coaster, Jar Jar Binks, Star wars, drink_coaster, Jar Jar,...
5
5.0
Mar 22, 2021
03/21
by
Arnie Weber (310weber)
data
eye 5
favorite 0
comment 0
This lid fits beautifully on a wide mouth mason jar. Perfect for storing dry goods in the cupboard.
Topics: Containers, jar, stl, mason_jar, wide_mouth, jar_lid, mason_jar_lid, thingiverse, lid, mason
2
2.0
Apr 19, 2022
04/22
by
culper (_Culper)
data
eye 2
favorite 0
comment 0
Intended for wide-mouth mason jars (16oz+). If you don't have them, but want them, order from [Target](https://www.target.com/p/ball-16oz-12pk-glass-wide-mouth-mason-jar-with-lid-and-band/-/A-50624128) as the prices are far better there than anywhere else I've looked. You'll need an 18mm glass downstem to use with this lid. The downstem should not be longer than 4 inches in length (for a 16oz jar). You'll find a two different versions of this thing, one with a mouth piece at 30 degrees, the...
Topics: bong, thingiverse, glass_jar, 18mm_downstem, jar, 420, waterpipe, mason_jar, Gadgets, stl, jar_lid
11
11
Jan 10, 2021
01/21
by
Ty DesEnfants (tigert10)
data
eye 11
favorite 0
comment 0
Let's be honest...sometimes you got to stop printing Baby Groot and fidget spinners and print something to make your wife happy. Here is something that you can easily print to put a smile on her face right before that next shipment of filament arrives. It is a jar lid for a mason jar. It is not threaded (meaning you won't be storing your pickled peppers in this thing) but your wife will love to use it for cotton balls, or Q-Tips, or bandaids...you know. It is made of three parts. The base, the...
Topics: container, lid, thingiverse, stl, mason_jar, glass_jar, Containers, bathroom, jar
5
5.0
Mar 9, 2021
03/21
by
Larry (1911ly)
data
eye 5
favorite 0
comment 0
A simple jar and lid I designed with Tinkercad to show someone how to make threaded containers. I have not printed it. It should print find. The lid threads should be fine a fine fit for the jar. Please comment with remarks if you print it.
Topics: Jar, stl, thingiverse, Containers, jar_lid
4
4.0
Mar 10, 2021
03/21
by
Terry Hoffman (hickengr)
data
eye 4
favorite 0
comment 0
This is my version of the Why Always Me (Warum immer ich) dice game. Most versions of this game have either 6 holes or 12 holes, but not both. My version can be played with only a few people (6 holes) or a lot of people (12 holes). The game screws onto a pint Ball jar which can be used to store the instructions, the dice, and all the colorful pegs when not in use. This is an excellent game for two or more people to play during the COVID-19 quarantine. It will also be a great gift for friends...
Topics: mason_jar, jar, stl, thingiverse, games, ball_jar, mason_jar_lid, 3D Printing, game, dice
11
11
Jan 18, 2021
01/21
by
David O'Connor (lizard00)
data
eye 11
favorite 0
comment 0
Derived from oldwizard's upload: https://www.thingiverse.com/thing:173670. (Thanks, by the way!) Although it's called a "sifter," I actually created this to prevent my daughter's pet fish from jumping out of its temporary home. To thread onto a standard US narrow mouth canning jar, without forcing, the X and Y axes had to be scaled up by 1%.
Topics: mason_jar, lid, thingiverse, jar, canning, Kitchen & Dining, canning_jar, stl
11
11
Jan 13, 2021
01/21
by
Ahmed Marzouk (Marzouk)
data
eye 11
favorite 0
comment 0
Mason Jar screwable Cap
Topics: container, thingiverse, stl, jar_cap, mason_jar, glass_jar, Containers, masonjar
8
8.0
Apr 17, 2021
04/21
by
dany doiron (Ohmcircuit)
data
eye 8
favorite 0
comment 0
Support pour pot mason. Mason jar holder.
Topics: mason_jar, storage, glass_jar, thingiverse, stl, Kitchen & Dining, jar, mason
3
3.0
Jun 22, 2021
06/21
by
Hannah Johnson (JohnsonFamilia)
data
eye 3
favorite 0
comment 0
I designed this wide-mouth ball jar sieve to use to soak things in alcohol. The sieve allows me to just lift it out with everything in it to rinse. Printing: PLA is recommended. I printed this model using an extra-fine layer height setting of 0.8mm. Supports are NOT recommended for this print.
Topics: mason_jar, ball_jar, thingiverse, sieve, net_pot, stl, jar, Containers
3
3.0
Apr 27, 2021
04/21
by
Ryan Hutchinson (dugost)
data
eye 3
favorite 0
comment 0
UPDATE (2020-03-03): I would recommend printing this with more walls or maybe even 100% infill. Only 2 walls and 50% infill along with repeated tightening ends up forcing the ring's layers apart after awhile. Keep in mind, this was from filling and refilling a jar with water multiple times a day. You can likely get away with less strength if the ring will see less frequent repeated tightening. This is a remix of [gblades' Mason Jar Lid](https://www.thingiverse.com/thing:3468220) remix of...
Topics: thingiverse, mason_jar_ring, Containers, stl, mason_jar, mason, jar_ring
Medicine Jar 1900
Topics: drawing, jar
6
6.0
Aug 27, 2020
08/20
by
Center for Accessible Technology in Sign
movies
eye 6
favorite 0
comment 0
ASL vocabulary
Topic: jar,jolt
5
5.0
Mar 4, 2021
03/21
by
Erik Nauman (enauman)
data
eye 5
favorite 0
comment 0
If you dropped your IGMIS Natural Honey 1500 g plastic jar of honey and the lid broke, well you are in luck! This threaded lid is not perfect but should fit pretty well. Created on Tinkercad, https://www.tinkercad.com/things/dOT7aLjvSXO-threaded-honey-lid.
Topics: Kitchen & Dining, thingiverse, jar_lid, stl, jar
10
10.0
Mar 12, 2021
03/21
by
Artur's Lab (arturslab)
data
eye 10
favorite 0
comment 0
Jar opener. Glue 2 pieces of rubber on inside of flat walls.
Topics: thingiverse, jar_opener, jar, stl, Hand Tools
3
3.0
Jun 20, 2021
06/21
by
Kayleb Kayleb (KaylebCZ)
data
eye 3
favorite 0
comment 0
Updated version of GummiBear's lid. More customization, More better ! Grip added, thickness/height variation now available.
Topics: thingiverse, stl, lid, jar, Containers, jar_lid
Taken from https://sites.google.com/site/luigi2600sgamehackingsite/minecraft-the-lost-versions Contains: Classic: c0.0.9a c0.0.12a c0.0.12a_01 c0.0.12a_02 c0.0.12a_03 c0.0.13a_02 c0.0.13a_04 c0.0.14a c0.0.23a_01 c0.0.24a (Creative) Survival Test: c0.30 Indev: c0.31 (Rana) Patched c0.31 (Steves) c0.31 -20100233 c0.31 -20100204 Infdev: Infdev -20100227 Infdev -20100415 Infdev -20100420 Infdev -20100608 Infdev -20100618 Infdev -20100627 Alpha: a1.0.7 a1.0.8_01 a1.0.16_01 a1.0.16_02 Beta: b1.7_01...
favoritefavorite ( 2 reviews )
Topics: minecraft, jar
4
4.0
Aug 22, 2021
08/21
by
Gavin McDowell (gavaga)
data
eye 4
favorite 0
comment 0
Designed this to attach a Teddie's Peanut Butter Jar to a pegboard. Compatible with pegboards with 1/4" holes, 1" spacing. This attachment fits a 78mm continuous thread jar with a 4mm pitch (~6.3 tpi). Made with Fusion 360. I included the f3z archive in case you want to customize it but I'm new to Fusion 360 so no promises! The pegs themselves are taken from Make Anything's "Pegboard Anything series: https://www.youtube.com/watch?v=-eGW-VmvHYE&t=2s
Topics: Organization, jar_lid, stl, thingiverse, jar, pegboard
4
4.0
Mar 22, 2021
03/21
by
That Guy (SmokeyMcbong)
data
eye 4
favorite 0
comment 0
Jar lid for gu cheesecakes to make use of the glass serving bowl they come in ( other than using them for ashtrays). Clamps well , great for weed jar to hold maybe 1/8th. Other designs can be made aswell if needed. If you need any changes made let me know and i'd be happy to help. Printed mine in TPU WITH SUPPORTS , weed leaf facing upwards. Sadly i have no pictures as i 'gave' it to a friend but when i print another i will upload them. Please print in flexible filament to prevent the tabs from...
Topics: jar lid, flexible, stl, tpu, gu jar, weed, weed jar, thingiverse, Other
History of the JAR: In the tiny frontier town of Thermopolis, Wyoming, on a hot summer day in 1995, the winds of creation were stirring. Malcolm McCallum, a Canadian and local carpenter, had a vision.The son of a popular stage and screen actor, Malcolm always had show business running through his veins. Now, at peace in the wastelands of Wyoming, the mode and direction of that artistic talent revealed itself to him. He picked up a pair of drumsticks, bought a cheap set, and began to play. He...
Topic: Fascination Jar
6
6.0
Mar 16, 2021
03/21
by
Sylvain Vehert (SylvainVR)
data
eye 6
favorite 0
comment 0
A Jam Jar Lid customized for your kitchen. Great idea to add color and fun on your kitchen shelves.
Topics: jar, lid, giraffe, jar_lid, Kitchen & Dining, stl, jam_jar, thingiverse, lowpoly
27
27
Nov 1, 2014
11/14
by
Funny or Die
movies
eye 27
favorite 0
comment 0
Episode five in a six-part epic. The Fan finally tracks down Jar Jar Binks, but also discovers the sinister truth about who is protecting him.
Topics: Funny or Die Video Archive, Episode Five, Episode V, Jar Jar, Jar Jar Binks, Kill Jar Jar, Star...
10
10.0
Apr 22, 2021
04/21
by
Steve Hawley (plinth)
data
eye 10
favorite 0
comment 0
This is a lid that fits on a standard ball/mason jar and is perfect as a shaker for salt.
Topics: salt, jar, Containers, stl, ball_jar, thingiverse, mason_jar, salt_shaker, lid
10
10.0
Apr 30, 2021
04/21
by
Roland Rauenhorst (RollyR)
data
eye 10
favorite 0
comment 0
I remixed this primarily to allow the sealing lid for a ball jar to fit easily under the dispenser valve so the jar can be tightly sealed (popcorn needs to be kept at the proper moisture for optimal popping). I also changed the "split line" to allow the threaded portion of the valve housing to be undivided. The ball is designed as one piece with built in supports. The handle is fashioned after a water valve handle and is held on with a stainless steel washer and 1/4-20 x 1/2"...
Topics: stl, mason_jar, glass_jar, dispenser, Ball_Jar, kitchen, Food, Popcorn, Kitchen & Dining,...
3
3.0
Jan 18, 2022
01/22
by
Carlos Damian Lopez Martinez (charliethehunter)
data
eye 3
favorite 0
comment 0
A lid for an old jar
Topics: glass_jar, jar_lid, Household, thingiverse, household, jar, lid, kitchen, stl, Kitchen_Utensils
3
3.0
Jun 10, 2021
06/21
by
Keegan McAllister (kmcallister5)
data
eye 3
favorite 0
comment 0
This adapter allows you to use a regular mouth Mason jar / canning jar as the grounds container for a Hario MSS-1 manual coffee grinder. Useful if you break the original plastic container, as I did. Remix of: https://www.thingiverse.com/thing:19105 https://www.thingiverse.com/thing:3046633 You'll need to grab the STLs from those Things if you want to build the OpenSCAD file.
Topics: mason jar, Kitchen & Dining, hario, thingiverse, canning jar, Coffee, jar, coffee grinder, stl
10
10.0
Apr 17, 2021
04/21
by
Daniel Jackman (Bugjack)
data
eye 10
favorite 0
comment 0
This is a ball screw-on ball-valve dispenser for a mason jar. There is one for a wide-mouth and normal mason jar. This remix incorporates the handle with the ball. https://youtu.be/_zEzUsAgPA8
Topics: Dispenser, Food, thingiverse, Ball_Valve, stl, Kitchen & Dining, Jar, mason_jar, Ball Jar
3
3.0
May 1, 2021
05/21
by
Esteban Dauksis (edauksis)
data
eye 3
favorite 0
comment 0
This parametric avocado sprouter creation is derived from from Philipp Reichmuth work https://www.thingiverse.com/thing:4268682/ Check the .scad file for parametrization instructions. The STL fits in a standard TO-77 jar
Topics: stl, avocado_sprouter, glass_jar, glass_jar_cap, mason_jar, mason_jar_planter, planter, Outdoor...
10
10.0
Jan 17, 2021
01/21
by
Imagination Creation 3D (ImaginationCreation3D)
data
eye 10
favorite 0
comment 0
These lid holders are designed to help organize the plethora of jar lids that accumulate in kitchen drawers. There are STL files for regular mouth, wide mouth, and standard salsa jar (85mm) lid holders. https://www.youtube.com/watch?v=W5irvhfWbGM
Topics: mason_jar, lid_holder, thingiverse, glass_jar, holder, jar, lid, Kitchen & Dining, stl
8
8.0
Jan 17, 2021
01/21
by
Tommy Alcoumy (Tommyelk)
data
eye 8
favorite 0
comment 0
stylish vented Jar Lid, 85 mm outer diameter, 83 mm inner diameter, 17 mm outer height and 15 mm inner height (depth) . The model can look as good as the picture according to your own layer setting. Enjoy :)
Topics: jar_lid, thingiverse, jar, lid, Kitchen & Dining, stl
4
4.0
Apr 1, 2021
04/21
by
Cody Dillman (LAMBDA_XIII)
data
eye 4
favorite 0
comment 0
Print with PET/PETG. Strength is not a major need, but a fairly inert plastic is good. supports from the build plate to the flange are needed. Enable settings that reduce stringing since there's two holes you would prefer to keep clean. The hole for the bowl/downspout is 17mm in diameter. It fits a mason jar with am opening of 60mm. Oh you wanted inches? google that and convert it yourself. I'm not in the mood to do that after having used this.
Topics: 3D Printing, thingiverse, jar, mason jar, bubbler, stl
3
3.0
Apr 4, 2021
04/21
by
Max Vd (vd_max)
data
eye 3
favorite 0
comment 0
Baby food jar holder. Two mounting options: horizontal and vertical.
Topics: thingiverse, jar, glass_jar, Kitchen & Dining, stl, holder
10
10.0
Apr 22, 2021
04/21
by
Steve Hawley (plinth)
data
eye 10
favorite 0
comment 0
This is a lid for a standard ball or mason jar. Compared with other lids on Thingiverse, this one fits the jars with greater ease.
Topics: jar, Containers, stl, mason, thingiverse, mason_jar, lid
