4
4.0
Apr 12, 2021
04/21
by
Mark Haze (markvanhaze)
data
eye 4
favorite 0
comment 0
This is a remix of https://www.thingiverse.com/thing:36935 and https://www.thingiverse.com/thing:190555 . Print them in two parts and then just glue them together with some CA glue.
Topics: thingiverse, Futaba, stl, immersion_rc, ezuhf_immersion_rc, ezuhf, R/C Vehicles
2
2.0
Aug 8, 2021
08/21
by
(nerdCopter)
data
eye 2
favorite 0
comment 0
### Apex Clone Side-Exit LiPo-Lead Saver * Inhibits LiPo leads from being sliced by top plate. * Because the clone is Un-chamfered. * Note: anyone thinking about the clone, the carbon is shi* poor. --- ### A little show of appreciation goes a long way. - If you enjoy this, please "Like" or comment. - Please post "Makes". - Feel free to promote it using the [attribution card](./attribution_card). - Please consider subscribing to my [Youtube](http://youtube.com/c/nerdCopter)....
Topics: immersion rc, thingiverse, apex, apex clone, immersion rc apex, R/C Vehicles, stl
4
4.0
Mar 21, 2021
03/21
by
Brian Wilkins (BrianWilkins)
data
eye 4
favorite 0
comment 0
I designed this to mount the EZUHF transmitter to the back of my Futaba 18MZ. It could be easily modified to fit other transmitters though.
Topics: stl, Futaba_18, ImmersionRC, futaba, immersion_rc, ezuhf_immersion_rc, Futaba18, R/C Vehicles,...
4
4.0
Mar 13, 2021
03/21
by
Mark Norton (UKCD)
data
eye 4
favorite 0
comment 0
I WANTED TO MOUNT MY VIDEO TX UNDER THE DISCOVERY INSTEAD OF ON TOP FOR BETTER TRANSMISSION. MADE QUITE A DIFFERENCE UNDER THE FRAME. ALSO YOU CAN SEE MY SKID ADAPTOR WEDGES FOR MY OTHER THINGS.
Topics: thingiverse, ImmersionRC, stl, immersion_rc, 3D Printing
10
10.0
Apr 5, 2021
04/21
by
THUG FRAMES (THUG3D)
data
eye 10
favorite 0
comment 0
Needed one ,so i made one. works really well. Puts the transmitter at the right angle to keep the attenna in the best position.The unit fits with friction and fits really well,I do have a clip that fits the unit but i would try its fitment with out the clip first as mine fits great. It has the pins accessable on the jr module so you can pickup ppm at all outputs. It also makes a very stable stand for the transmitter and keeps your electronics off the floor and you can slip your hand under the...
Topics: thingiverse, ezuhf_immersion_rc, R/C Vehicles, stl
4
4.0
Apr 12, 2021
04/21
by
Geoff Simmons (gdsimmons)
data
eye 4
favorite 0
comment 0
This mount for the 250 mW Immersion RC transmitter was designed to fit the side of the Xugong frame between the top and bottom plates. It will also work for any other frame that you can mount it to with 3M outdoor foam tape. Enjoy! This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/27bxtQOQNJl
Topics: thingiverse, fatshark, stl, immersion_rc, Xugong, R/C Vehicles
4
4.0
Apr 8, 2021
04/21
by
Jimmy Agnekil (Lubis)
data
eye 4
favorite 0
comment 0
A holder/box where the ImmersionRC 600mW and MinimOSD are stacked on top of eachother
Topics: immersion, MinimOSD, stl, immersion_rc, thingiverse, R/C Vehicles
2
2.0
Oct 26, 2021
10/21
by
Josh Gault (JoshGFPVPrints)
data
eye 2
favorite 0
comment 0
Designed for the RMRC 1.3 rx, partom may also fit. Slides together and then 4 x 8mm m3 screws to close. Immersion RC tramp is the VTX in the photos, just sits on top and antenna goes together on the side. (may need slight drill or file to get the fit perfecto. Added 526 top / bottom for TX526 vtx
Topics: Immersion RC, FPV, RMRC, True RC, Hobby, stl, thingiverse
3
3.0
Jan 6, 2021
01/21
by
Dennis FiveLeafCloverFPV (TurboCinqy)
data
eye 3
favorite 0
comment 0
Extends you SMA for about 10mm outside the module. So you can add a 45 degrees SMA adaptor.
Topics: EZ_UHF, ImmersionRC, R/C Vehicles, stl, thingiverse, immersion_rc
4
4.0
Apr 13, 2021
04/21
by
Joe Harper (Homekeys)
data
eye 4
favorite 0
comment 0
If you print one please post a pic! I love the Immersion RC Duo but i got tired of it rattling around against my tripod or sticking it to the tripod with duct tape so i made this far more elegant solution. Printed with support works great in PLA. the tolerances are VERY Tight on purpose so you can use this with or without the velcro to hold the duo in the holster. the rear mounting bracket offers the option to mount the holster with velcro or with tip ties and should mate well to nearly any...
Topics: thingiverse, RX, ImmersionRC, stl, immersion_rc, Duo, R/C Vehicles
5
5.0
Mar 21, 2021
03/21
by
Brian Wilkins (BrianWilkins)
data
eye 5
favorite 0
comment 0
Protector case for Immersion RC's EZOSD GPS module.
Topics: stl, immersion_rc, EZOSD, GPS, R/C Vehicles, thingiverse, ImmersionRC
4
4.0
Apr 8, 2021
04/21
by
(Karmarag)
data
eye 4
favorite 0
comment 0
Wanted to encase the 600mw Immersion transmitter yet keeping it vented. Here the design: - Custom fit - Vented yet sturdy printed also in PLA - 3 mm air gap on the lower side, 5 mm on the upper side. - Box is designed for the transmitter module face the much ventilated side. - Once you put on the antenna, the transmitter card is fixed inside the box and auto-centered. - Just add straps and fly! Optimized for DJI installation, lower side, centered, near the battery (when I'll find time I'll...
Topics: RC, video_transmitter, stl, immersion_rc, thingiverse, R/C Vehicles
11
11
Apr 16, 2021
04/21
by
dale james (Dim3nsion)
data
eye 11
favorite 0
comment 0
these are oem fitment side plates with esc holders if they need changing a little please just let me know
Topics: immersion_rc, vortex, 3D Printing, thingiverse, stl, ImmersionRC, ImmersionRC_Vortex
11
11
Apr 16, 2021
04/21
by
dale james (Dim3nsion)
data
eye 11
favorite 0
comment 0
This is an oem fitment vortex side plate, This has esc holders and vents all round and slimmer than my other version but not as strong as the struts were halved.
Topics: immersion_rc, vortex, 3D Printing, thingiverse, stl, ImmersionRC, immersion, ImmersionRC_Vortex
11
11
Mar 21, 2021
03/21
by
dale james (Dim3nsion)
data
eye 11
favorite 0
comment 0
This is an oem fitment vortex side plates with esc holders and centre vents.
Topics: stl, 3D Printing, vortex, immersion, immersion_rc, ImmersionRC_Vortex, thingiverse, ImmersionRC
7
7.0
Apr 19, 2021
04/21
by
marco wild (herr_wild)
data
eye 7
favorite 0
comment 0
case for the immersion rc power meter v2 with the scully antenna and different connectors. https://www.immersionrc.com/fpv-products/rfpwrv2/
Topics: thingiverse, stl, Electronics, immersion rc, RF Power Meter v2, Powermeter, irc
11
11
Apr 7, 2021
04/21
by
Bryan S (Blizzard1287)
data
eye 11
favorite 0
comment 0
This is a protection case for your 8ch EZ Uhf. The tabs are optimized for a Xugong but can be mounted anywhere really. *edit* Added previous versions of the protection box in case someone could use it for other application. The model with the long rear tabs is the XuGong model
Topics: 8ch_receiver, immersion, Xugong, stl, immersion_rc, thingiverse, R/C Vehicles
6
6.0
Apr 8, 2021
04/21
by
Bob (bobunobu)
data
eye 6
favorite 0
comment 0
Two mounts I made up for the Immersion 5.8ghz 600mW VTX. One was designed for mounting horizontally on my QAV-250. This one has a support area for the right angle antenna connector. The other is designed for mounting vertically on square booms (as in Tri-copters) and can be customized for the boom width. The cut-outs allow for relatively easy access to change the channel dip switches.
Topics: 600mw, miniquad, stl, immersion_rc, thingiverse, FPV, vtx_holder, R/C Vehicles
4
4.0
Apr 13, 2021
04/21
by
Rui Goncalves (rgon)
data
eye 4
favorite 0
comment 0
https://www.youtube.com/watch?v=I5NLngYqnio
Topics: thingiverse, Hobby, cap, antenna, spironet, cover, fpv, stl, immersion_rc, Quadcopter, immersion
9
9.0
Mar 10, 2021
03/21
by
Jeremy Boettcher (betcher87)
data
eye 9
favorite 0
comment 0
GoPro Session mount for Vortex 250 Pro This is a mash up of two other designs I found on here Works well with the hs1177 mount, stock flight camera mount won't fit with this
Topics: gopro, R/C Vehicles, stl, thingiverse, vortex_250_pro, immersion_rc, session
4
4.0
Apr 16, 2021
04/21
by
Brian Wilkins (BrianWilkins)
data
eye 4
favorite 0
comment 0
Protective case for the ImmersionRC EZUHF 8ch lite receiver.
Topics: thingiverse, ezuhf, EZ_UHF, stl, R/C Vehicles, ezuhf_immersion_rc, uhf
4
4.0
Apr 8, 2021
04/21
by
(ahuddart)
data
eye 4
favorite 0
comment 0
Front Gimbal Mount for Mobius Actioncam for the Immersion RC Xu Gong quadcopter
Topics: Mobius, multicopter, Xugong, stl, Quadcopter, thingiverse, FPV, R/C Vehicles, Immersion_RC
7
7.0
Apr 23, 2021
04/21
by
Bryant Barnard (babar121)
data
eye 7
favorite 0
comment 0
Stay bent antenna elbows for your fpv goggle antenna. There are three different sizes; 90 / 120 / 180 degress bend. Snaps onto antenna easily and securely. A little smoother design for better aesthetics. Part was printed open side down.
Topics: Hobby, fpv, Quadcopter, ABS, fatshark, antenna, immersion_rc, tool, stl, thingiverse, hobby
4
4.0
Apr 12, 2021
04/21
by
mario (mariors50)
data
eye 4
favorite 0
comment 0
suport dipole 433
Topics: thingiverse, 433, stl, immersion_rc, lrs, ezuhf, dragon_link, R/C Vehicles
12
12
Apr 16, 2021
04/21
by
Nick O (zeb00)
data
eye 12
favorite 0
comment 0
Redrawn from original concept by [ARGHtur](http://www.thingiverse.com/ARGHtur/about). [DUO5800 tripod mount](http://www.thingiverse.com/thing:959906) V1 -Added slots for Velcro strap and changed shape for printing standing upright V2 - increased slot with to 26mm for 1 inch Velcro strap. Added hole for tripod mount spring pin V3 - Changed 1/4 inch nut to 1/4 inch pressed insert with 8.5mm od
Topics: immersion_rc, 5800, thingiverse, duo5800, stl, fpv, ImmersionRC, R/C Vehicles, 58ghz, Duo
14
14
Apr 16, 2021
04/21
by
Peter Sorgen (Supeso)
data
eye 14
favorite 0
comment 0
Simple Receiver Holder for Devo7 on the Immersion RC Vortex, easy to insert and remove...
Topics: Vortex, immersion_rc, thingiverse, Devo7, stl, ImmersionRC, R/C Vehicles, ImmersionRC_Vortex, Devo
10
10.0
Apr 21, 2021
04/21
by
Anton Popov (antonpo)
data
eye 10
favorite 0
comment 0
Fatshark goggles brightness/contrast knob
Topics: thingiverse, stl, R/C Vehicles, immersion_rc, fpv, fpv_googles, fatshark, knob, ImmersionRC
10
10.0
Apr 21, 2021
04/21
by
Carl (cfeniak)
data
eye 10
favorite 0
comment 0
Modified the 600mW version for the central antenna mount of 25MW vtx. Split the object with your slicer if you want to print on half at a time.
Topics: thingiverse, stl, R/C Vehicles, immersion_rc, vtx, fat_shark, vtx_holder, fatshark, ImmersionRC
5
5.0
Apr 1, 2021
04/21
by
Ian Pluska (IanDrones)
data
eye 5
favorite 0
comment 0
ImmersionRC 8-way LapRF mount for 1" PVC pipe.
Topics: ImmersionRC, 8-way, thingiverse, laprf, R/C Vehicles, lap timer, Immersion_RC_laprf, stl
4
4.0
Mar 20, 2021
03/21
by
Jeroen Brosens (j0bro)
data
eye 4
favorite 0
comment 0
This is one of the custom parts that I designed for the ImmersionRC XuGong quadcopter frame. It originally came with a servo driven gimbal, this front mount plate makes it possible to easily screw on a brushless gimbal (the motor holes are in the standard 16mm and 19mm spacings). Additionally, an FPV board camera can me mounted to this plate using a few bolts or zipties. The placing on the side makes sure the GoPro doesn't block the image. I added two versions of the plate, one with a large...
Topics: fpv, GoPro, stl, Brushless_Gimbal, immersion_rc, Xugong, Quadcopter, R/C Vehicles, thingiverse,...
10
10.0
Jan 18, 2021
01/21
by
Pekk Roland (Peck)
data
eye 10
favorite 0
comment 0
Armattan Rooster Tramp HV holder. Mount will sit on the sunk nuts, and you'll need two longer bolts to mount it.
Topics: ImmersionRC, fpv, immersion_rc, Armattan, thingiverse, tramp_hv, Rooster, Hobby, Tramp,...
5
5.0
Apr 13, 2021
04/21
by
Mike Brandi (idnarbjm)
data
eye 5
favorite 0
comment 0
Here is a better version of this RX case. This one doesn't require that you remove the cover from the receiver. http://www.thingiverse.com/thing:889408 I used [Earthworm's](http://www.thingiverse.com/thing:811825) great D4R-II mount, but added a little to the bottom and holes for Zip-ties. Its made to mount on the receiver tray for the ImmersionRC Vortex. With this box you need to take the cardboard case off of the D4R V2 Bottom just has larger Zip-Tie openings.
Topics: thingiverse, D4R-II, Vortex, FrSky, ImmersionRC, ImmersionRC_Vortex, stl, immersion_rc, R/C Vehicles
3
3.0
Jan 20, 2021
01/21
by
Karl Payne (Karl33to)
data
eye 3
favorite 0
comment 0
Angles the LapRF puck at 45 degrees for better coverage. Slot at the top to allow room for the antenna mod. Prints without supports.
Topics: ImmersionRC, thingiverse, laprf, stand, R/C Vehicles, Immersion_RC_laprf, stl, VTX_Timing_sytem
6
6.0
Jan 21, 2021
01/21
by
Kevin Lee (whitenoise106)
data
eye 6
favorite 0
comment 0
The IRC RF Meter Case is designed to add protection to your device while also allowing for a clean storage solution for the extra components that come with it. Slots for storing the included SMA-SMA adapter and antenna are located on the side of the case for easy access and a lanyard hole is to allow the SMA protector to be securely attached at all times. This print requires the front face of the case to be cut out for access to the screen. Because of this design, the print should require no...
Topics: ImmersionRC, fpv, immersion_rc, fpvracing, multicopter, thingiverse, drone, R/C Vehicles,...
5
5.0
Apr 11, 2021
04/21
by
Michael Erwin (MichaelErwin)
data
eye 5
favorite 0
comment 0
Simple Immersion RC or FatShark VTX & 600TVL Camera Horizontal Mount for Folding TriCopter: http://www.thingiverse.com/thing:486465
Topics: thingiverse, fatshark, 600tvl, fpv, stl, immersion_rc, R/C Vehicles, FPVLAB, fpv_camera_mount,...
7
7.0
Mar 20, 2021
03/21
by
mario (mariors50)
data
eye 7
favorite 0
comment 0
ez uhf case
Topics: ez_uhf, stl, ezuhf, ez, ezuhf_immersion_rc, R/C Vehicles, thingiverse, ez_uhf_litte
4
4.0
Apr 13, 2021
04/21
by
Stanley Kuenzle (Stanleykuenzle)
data
eye 4
favorite 0
comment 0
This is my simple diversity receiver support. It fits on a 8mm rod. I have placed it on a old tent stick :-) Please hit like if you like it. Enjoy Stanley
Topics: thingiverse, multicopter, receiver, phantom, diversity, dji, fpv, stl, drone, immersion_rc, race,...
10
10.0
Apr 21, 2021
04/21
by
(Firefly1504)
data
eye 10
favorite 0
comment 0
This is the lower plate of the immersionRC Vortex. It fits all original accessories and also the parts kindly provided by Dim3nson http://www.thingiverse.com/thing:1052847
Topics: thingiverse, mini quad, stl, R/C Vehicles, immersion_rc, vortex, fpv, ImmersionRC_Vortex,...
9
9.0
Apr 28, 2021
04/21
by
(MichaelHaineault)
data
eye 9
favorite 0
comment 0
This is a camera mount for the vortex pro. It has a 33 degree angle. Fits a gopro session or any other gopro style camera!
Topics: thingiverse, vortex pro 250, Xiaomi_yi, stl, gopro_session_mount, gopro, R/C Vehicles, immersion_rc
13
13
Jan 4, 2021
01/21
by
wayne andrews (wayneuk)
data
eye 13
favorite 0
comment 0
a alternative tx mount with tabs remixed http://www.ebay.co.uk/itm/401071744800?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
Topics: R/C Vehicles, Emax_250, stl, emax_nighthawk, ImmersionRC_58Ghz_600mw_Tx_Case, 5.8ghz, thingiverse,...
10
10.0
Jan 18, 2021
01/21
by
Will Meyer (fpvga)
data
eye 10
favorite 0
comment 0
A rear FrSky receiver antenna mount for the ImmersionRC Vortex 250 Pro. It sits on the rear of the quad using the standard mounting holes and positions the antennas asymmetrically to improve reception (increasing the chances that one of them will be polarized in line with your transmitter regardless of orientation). Works with standard antenna tubes. The Fusion360 source is available here: http://a360.co/2ECXR9S
Topics: ImmersionRC, fpv, immersion_rc, thingiverse, antenna_mount, frsky, vortex_250_pro, R/C Vehicles,...
5
5.0
Jun 10, 2021
06/21
by
(Boopidoo)
data
eye 5
favorite 0
comment 0
The stock landing gears are really short so I designed a longer foldable variant. To make locking easier without tools I've designed knobs for the nuts. Parts needed: 4 pcs M3x10 screws 4 pcs M3 nuts (preferably 2 of those are NYLOC) 1 pcs 106mm M3 threaded rod 1 pcs 82mm M3 threaded rod Instructions: 1. Unmount the existing rubber legs on the bottom frame 2. Unmount the screws where the undercarriage will be installed 3. Install the front mount (widest) using two M3x10 screws 4. Install M3 nut...
Topics: Landing_Gear, quad, immersion_rc, Xugong_Pro, thingiverse, Immersionrc, undercarriage, R/C...
5
5.0
Apr 12, 2021
04/21
by
Marcos Palhares (Marcospal)
data
eye 5
favorite 0
comment 0
Simple case for the Immersion RC video transmitter with vents for cooling. The device fits snuggly inside and the antenna holds everything in place.
Topics: thingiverse, vented, fatshark, R/C Vehicles, fpv, stl, mount, case, immersion_rc, quadcopter, quad,...
4
4.0
Jun 10, 2021
06/21
by
Takis Liberotak (liberotak)
data
eye 4
favorite 0
comment 0
Original design by Acal51 for Nazgul XL5. This is a remix to fit Cidora SL5 V2.1
Topics: iflight, IRC_Ghost, ImmersionRC, ghost, ghost_qtee, immersion_rc, thingiverse, qtee,...
4
4.0
Apr 12, 2021
04/21
by
Tobias (Guzel)
data
eye 4
favorite 0
comment 0
Holder for Fat Shark 25mW transmitter which can be attached at the DJI Flamewheel F450 or the like.
Topics: thingiverse, multicopter, dji_f450, ImmersionRC, multirotor, fatshark, fpv, stl, quadrocopter,...
8
8.0
Jan 16, 2021
01/21
by
Antonio Di Maria (iZe)
data
eye 8
favorite 0
comment 0
I hate mounting VTX on the top plate, for this reason i choose to desig this simple VTX holder. See it in action: https://youtu.be/OLegFTjXlg8 Additonal 3d printing and drone racing "stuff" on my youtube channel (iZeeFPV): https://www.youtube.com/channel/UCX7UjdoPqErjrR2nYaxkqCw
Topics: immersion_rc, Standoff, thingiverse, team_black_sheep, tbs, R/C Vehicles, mount, video_transmitter,...
10
10.0
Jan 18, 2021
01/21
by
Will Meyer (fpvga)
data
eye 10
favorite 0
comment 0
This is a mount for an HS1177 style FPV camera on an ImmersionRC 250 Pro. Print two copies, one for each side. It will hold the camera snugly at whatever angle. To use a camera mount like this you need to ditch the top plate and mount your GoPro some other way (I use this thing: https://www.thingiverse.com/thing:2771361). This together gives a much simpler and more durable overall package, and the vibration is fine. The Fusion360 source is available at: http://a360.co/2HcLFLi Note that the...
Topics: ImmersionRC, fpv, immersion_rc, thingiverse, HS1177, fpv_camera_mount, vortex_250_pro, R/C...
9
9.0
Jan 14, 2021
01/21
by
Daniel Reuter (DR1986)
data
eye 9
favorite 0
comment 0
I want to install a old IRC VTX on my quad, so I designed this mount, for 32mmx42mm Spacers, like Martian II. I want to set the VTX a little bit higher, to get a better way for the wires, the "warm" side of VTX is set to the free (upper) side for better cooling. Ive added V3, with less more space ...V4: two small bridges at the under side for mounting with a cable tie
Topics: R/C Vehicles, ImmersionRC, thingiverse, stl, raceband, Martian ii, mount, vtx_holder, VTX,...
2
2.0
Aug 8, 2021
08/21
by
(nerdCopter)
data
eye 2
favorite 0
comment 0
### Apex/Apex-Clone kicks 16×16 skids skidz * Precision fit for 16×16 motor mount. * 13mm-Tall for for expected grinding on concrete landings. * If 13mm is too tall, simply use a 3D-slicer to crop 3mm off the landing cone. ### Why i did it. * Originals are too short for repeated concrete landings. I've already had chin-bolts ground and belly-bolts knicked in only a few landings due to the near-non-existent clearance. ### How i did it: * i used the general outline of the original by exporting...
Topics: apex feet, thingiverse, skidz, immersionrc_apex, apex, skids, immersion rc apex, R/C Vehicles, apex...
4
4.0
Apr 13, 2021
04/21
by
Carl (cfeniak)
data
eye 4
favorite 0
comment 0
ImmersionRC 5.8Ghz Audio/Video Transmitter (FatShark compatible) 600mw Tx case. Protects tx while allowing cooling air flow. Supports antenna mount and prints easily with no supports. Adds flat surfaces to Velcro to. Check out my new design for better antenna support: http://www.thingiverse.com/thing:865127
Topics: thingiverse, multicopter, video_transmitter, 58, ImmersionRC, fat_shark, fat_shark_transmitter,...
