51
51
texts
eye 51
favorite 0
comment 0
radio shack games support 12754
Topics: faxback, ffc
10
10.0
Jan 18, 2021
01/21
by
aaron reyes (lostinacrowd)
data
eye 10
favorite 0
comment 0
I wanted to expose my Flexion but still wanted a solid place to ziptie the cables and integrate the rear cooler made by ultravincent. https://www.thingiverse.com/thing:1304044 Thanks!
Topics: 3D Printer Accessories, FFCPRo, FFCP, thingiverse, FFCP_2016, FFC_Pro, stl, ffc
83
83
texts
eye 83
favorite 0
comment 0
Schematics: OEM FSP 204 2F01
Topics: sfhcaa, ifl, aav, ffc, ilv
Joe Eberle
Topics: FFC, Watertown, Retirement, Jesus, Steward, Luke
4
4.0
Mar 16, 2021
03/21
by
Paul Greucean (pmagda)
data
eye 4
favorite 0
comment 0
Convert your Crafbot PLUS with the old Cable Chain assembly to the new FFC Ribbon cable. This way you can upgrade to the new v3.1t motherboard that has new and silent stepper drivers, your printer will be less noisy. There are 2 versions for the top rail, if you have a larger printer then you can print the FCC-TopRail-SinglePiece.stl, if all you have is the Craftbot Plus then print the Left and Right side of the top rail and glue them together(haven't tested it but it should hold up just fine).
Topics: ffc, craftbot 2, thingiverse, CraftBot, cable chain, 3D Printers, stl, CraftBot_Plus, cable...
4
4.0
Apr 20, 2021
04/21
by
Kulfürst (kulfuerst)
data
eye 4
favorite 0
comment 0
UPDATE 1: Added tighter fitting lid. This FFC Barrel allows you to shorten any flat flex cable no wider than 16 mm to the desired length, without cutting the cable. It includes a small hole in the bottom which allows you to fix it in the desired place with an M3 screw. If you download this design, please consider leaving me a Like.
Topics: thingiverse, stl, Electronics, FFC, barrel, flat_flex_cable, cable_shortener
Highlights of Amesâ simulation facilities, including VMS, CVSRF, FFC and VLAB. Video will be used as a marketing tool at I/ITSEC conference in Orlando, FL, Dec. 6 - 9, 2004.
Topics: Sim, Lab, Ames, VMS, CVSRF, FFC, VLAB, I/ITSEC
5
5.0
Mar 15, 2021
03/21
by
alien hitman (alien_2005)
data
eye 5
favorite 0
comment 0
repair from keyboard notebook noizze ABS 0.2mm
Topics: FPC, thingiverse, keyboard notebook, Computer, FFC, notebook, stl, keyboard
2
2.0
Apr 19, 2022
04/22
by
ismail ağır (ismailagir)
data
eye 2
favorite 0
comment 0
5 pin, 1 mm pitched FFC FPC SMD female adapter pin replacement, the squeezing part
Topics: smd, thingiverse, 5pin, fpc, replacement, Electronics, connector, ffc, stl
3
3.0
Mar 25, 2021
03/21
by
Neil Bowden (firepower9966)
data
eye 3
favorite 0
comment 0
V slot cable clamp for FFC (Flexible Flat Cable) crossing 2020 or 2040 extrusion. need this to keep my Geeetech LCD interface tidy and safe. Print two stand upright to go on either side of FFC to hold it.
Topics: stl, thingiverse, v slot, clamp, 3D Printer Parts, cable, FFC
MANGA: Angel Densetsu Volume 7 Chapter 33
Topics: anp, fob, hap, obsession, beat, amp, ffc, winnins, jinchi, stupemt
Highlights of Amesâ simulation facilities, including VMS, CVSRF, FFC and VLAB
Topics: NASA, Ames, Simulation, Vertical Motioin Sim, VMS, CVSRF, FFC, VLAB
MANGA: Blue Heaven Volume 02
Topics: zyph, thdt, gatsu, asians, drifting, fifl, towarps, psopletvtfo, ffc, fflv
6
6.0
Apr 12, 2021
04/21
by
cody jeffries (discojon)
data
eye 6
favorite 0
comment 0
Remix of the half stepper. This is a spacer that will fill the hole from removing your left stepper.
Topics: thingiverse, flashforge, stl, ffc, flashforge_creator_pro, 3D Printer Parts
329
329
texts
eye 329
favorite 0
comment 0
Commodore C64 Manual: Jupiter Lander (1982)(Commodore)(Jp)
Topics: commodore, max, ciel, ffc, kwhftb, iwe, tkfmttth, fcitnii, itftmk, dddddddddddddddd
4
4.0
Apr 16, 2021
04/21
by
Raging Rivers (ragingrivers)
data
eye 4
favorite 0
comment 0
A remix of robosavvy's access. Two oring slots,#7 and a #14, three pieces in one file, prints without raft. It is sized for 1.75mm and a guide tube should slot in the top as shown. Its meant to be a clamping arrangement with your container, #4 machine screws (or #8s if you drill out the top some), the bottom hat is meant for robosavvy's rubber glove trick. I made this as something to print faster, without raft, to not rely on glue, could mount closer to the edge, and that would better hold my...
Topics: Sealed Container, FFC Pro, thingiverse, stl, 3D Printer Accessories, Flashforge
4
4.0
Mar 8, 2021
03/21
by
Manollo (Indigo4)
data
eye 4
favorite 0
comment 0
Accurate model of 20pin FFC connector (0,5mm pitch)
Topics: stl, thingiverse, smd, connector, fpc, ffc, hdmi, Gadgets, ribbon, 20pin
10
10.0
Apr 28, 2021
04/21
by
jeroen ffc (Jeroen2006)
data
eye 10
favorite 0
comment 0
Phone charger holder my print settings: -------------------------------------------------------- Layer heght: 0.1 mm shell thickness: 0.5 mm -------------------------------------------------------- Bottem/Top thickness: 0.6 mm fill density: 100% -------------------------------------------------------- print speed 45 mm/s Nozzel temp: 210 C(PLA) Nozzel temp: 230 C(ABS) Bed temp: 70-80 C -------------------------------------------------------- Suport: None Platform ad type: None...
Topics: thingiverse, charger, phone, stl, ffc, 3D Slash, holder, pla and abs, Other
10
10.0
Apr 27, 2021
04/21
by
Raging Rivers (ragingrivers)
data
eye 10
favorite 0
comment 0
Latest UPDATE 8/14/16 Added a Straight Coupling Adapter for the clear hose listed, see pictures, works with all existing parts but now allows easy plug and unpluging of the hose and I use the Vent plug when ventilation system is not in use. This is meant to be a full ventilation kit for a Flashforge Creator Pro. You will need to print: -Top Replacement pieces for FFC Pro: FFC PRO Vent Top Left and Right (2 pieces total) -Duct to mount to top of new FFC Pro Top: 4in Vent adapter from ffcp01 file...
Topics: Ventilation, thingiverse, FFC_Pro, 3D Printer Venting, 3D Printer Parts, stl, fume_extractor
Topics: remove, confidential, series, disconnect, harness, ffc, escutcheon, connector, detents, bluetooth,...
76
76
texts
eye 76
favorite 0
comment 0
Service Manual: Panasonic TY TP65P30K
Topics: remove, ffc, solder, touch, removal, screws, escutcheon, panel, cable, usb, touch panel, free...
131
131
texts
eye 131
favorite 0
comment 0
Service Manual: Panasonic TY TP60P30K
Topics: remove, solder, ffc, touch, removal, cable, screws, escutcheon, panel, usb, touch panel, free...
8
8.0
Apr 17, 2021
04/21
by
John Mulac (3DPRINTINGWORLD)
data
eye 8
favorite 0
comment 0
**Flashforge Creator Pro Controller Button** I was missing the center button on my Flashforge Creator Pro and I'm too cheap to pay Flashforge the $3 for a new button so I decided to print my own. At first I did not think the part would be printable because the catch for the button is so small and hard to measure but surprisingly it worked on the first print and I have not had any issues with it yet!
Topics: button, 3D Printer Parts, FFC_Pro, thingiverse, ffcp button, stl, flashforge, FFCPRo, FFCP,...
8
8.0
Apr 17, 2021
04/21
by
Alan Weinstock (pyr0ball)
data
eye 8
favorite 0
comment 0
~~##Rev.E is incoming!~~ [*I've started over from scratch and built my own electrical design from the ground up. The new project can be found here*](https://www.thingiverse.com/thing:3343928) ========================= The new version has an onboard microcontroller to auto-calibrate on the fly, and a much more stable circuit with better filtering to prevent false positives. *** I'll be posting it in it's own listing, as Rev.E is less universal, and more geared to "Mendel" style...
Topics: flat_cable, precision_piezo, 3D Printer Parts, thingiverse, stl, piezo, controller_addon,...
chinese rice grinders
Topics: rice, ffc, lanka, sri, grinder, grinding, practical, udaya, machine, grinders, practical action,...
8
8.0
Jan 19, 2021
01/21
by
Yoco snap (3DMEN)
data
eye 8
favorite 0
comment 0
With the flashforge creator pro, the tubes don't plug well on the top plate, and they sometime remove themself. I decided to remix DrLex's design to resolve the problem. Easy to print, maybe better with high temperature materials but i don't think to much heat comes to this part.
Topics: 3D Printer Parts, upgrade, Plate, FFCP, Forge, Top, thingiverse, FFC, Creator, Part, Flash, tube,...
Topics: remove, confidential, series, lan, wireless, lcd, direction, ffc, ferrite, detent, wireless lan,...
8
8.0
Jan 17, 2021
01/21
by
Alan Weinstock (pyr0ball)
data
eye 8
favorite 0
comment 0
This version is depreciated ------------------------------------- ****[Find the new version here](https://www.thingiverse.com/thing:2712439)**** ****I bring you: The Universal Piezo Z-Sensing Extruder Mount!**** This Thing is a replacement X-Carriage extruder mount that incorporates the Precision Piezo sensor. It allows the printer to get pinpoint accurate Z-Axis offsets without any compromise. Included in this thing are mounts for the [original Precision...
Topics: flat_cable, electronics_upgrade, piezo, extruder_mount, stl, thingiverse, z_axis, FFC_Breakout,...
4
4.0
Jun 6, 2021
06/21
by
olivier GASPARD (polartik)
data
eye 4
favorite 0
comment 0
This part is a cable cover for the cable outlet of the hot plate (bed) on the FlashForge Creator Pro 2016 printer. The size of the opening is 40x10 mm The utility is to prevent dirt from falling into the electronic card compartment. The piece is inspired by an existing model but has been entirely re-designed. Cache-cable.fpp is the support file for flashPrint use.
Topics: FFCP, flashforge, accessory, cable_management, Cache, FFCPRo, FFCP_2016, FFC_Pro,...
4
4.0
Mar 21, 2021
03/21
by
Nico Darrow (deckernico)
data
eye 4
favorite 0
comment 0
This is a blank backplate that you can customize. That's pretty much it ;P Printed in ABS, black and silver. Check out instructions on how i got the colors with a single extruder.
Topics: stark, stl, ffc, backplate, game_of_thrones, replicator, FFCX, 3D Printer Parts, FFCPRo,...
In 2003, Dallas/Fort Worth International Airport (DFW) began real-time, human-in-the-loop simulations that demonstrated the effect of adding perimeter taxiways. During the tests, air traffic controllers, pilots and officials from DWF, the FAA and NASA evaluated numerous scenarios at NASA Ames Research Center's FutureFlight Central (FFC) and Crew Vehicle Systems Research Facility (CVSRF) to verify the cost benefit and paper studies on the perimeter taxiways. For more information about the...
Topics: nasa, ames, nasa ames, dfw, ffc, cvsrf, future flight central, airport, aviation, runway,...
Source: http://youtu.be/51O6AqeB1QQ
6
6.0
Apr 12, 2021
04/21
by
cody jeffries (discojon)
data
eye 6
favorite 0
comment 0
I have removed my left stepper motor and extruder and am replacing it with a 2.8W laser from JTech Photonics. This is the Alpha version (untested) of the mount. It should allow for the laser to shine through the removed extruder hole in the extruder bar. The top plate will need redesigned, i'm still working on that at the moment. I am going to bring this out of Work in Progress Status. The mount, and case are installed and I have finally sorted out the code. Update 4: Part is printed and...
Topics: thingiverse, jtechphotonics, Flashforge_Creator_Pro, Flashforge, laser_cutter, Replicator, 3D...
4
4.0
Mar 5, 2021
03/21
by
Bill Easterly (x20235)
data
eye 4
favorite 0
comment 0
Hello Thingiverse, I was having issues with my X-Carriage binding because the stock design is too large, causing the bearings to fail prematurely. I redesigned the carriage In a way that allows for a slight amount of adjustment on the bearing spacing, this way they are all positioned perfectly and my carriage no longer binds. I replaced all the bearings in the X & Y axis with these bearings from MISUMI (LMU-N8), Note that they are longer than the stock bearings but they will fit fine in the...
Topics: stl, FFCP_Upgrades, Flashforge_Creator, X_carriage, x-carriage, FFC_Pro, flashforge, bearing,...
8
8.0
Mar 17, 2021
03/21
by
Alan Weinstock (pyr0ball)
data
eye 8
favorite 0
comment 0
Presenting... --- # The Pyr0-Piezo Z-Axis Sensor ## What is this thing? TL;DR: It's a litte circuit that turns your actual nozzle into a z-probe. This is a Z-Probe Sensor for 3D Printers that utilizes a piezoelectric element (commonly a 20-27mm piezo disk used in musical pickups) to detect when the nozzle of the printer touches the bed. There have been other Z-Probes in the past that do this, but this is the first to incorporate an onboard microcontroller that automatically calibrates and...
Topics: Piezo_Z-Sensor, Z_probe, precision_piezo, ffc, Z-probe, 3D Printer Parts, piezo, stl,...
9
9.0
Apr 28, 2021
04/21
by
Beau Lanphier (Jangles1981)
data
eye 9
favorite 0
comment 0
Very simple gyro keychain.
Topics: print_in_place, thingiverse, FFC_Pro, multi-part, toys, FFCP, keychain, gyro, dual_extrusion, stl,...
10
10.0
Apr 28, 2021
04/21
by
Beau Lanphier (Jangles1981)
data
eye 10
favorite 0
comment 0
Recently I have rediscovered a part of my childhood with playing my old NES and SNES games. After multiple hours of fun reliving my past there was one issue for both systems, my hands are to large for the old controllers. This NES controller grip feels more like a Playstation or XBOX controller in your hand which is what I have grown accustom to. It is also more ergonomic than the original as well. Hope you enjoy it as much as I have! *Update* Added second file with two holes for easy release...
Topics: video_game, thingiverse, 3dprinting, FFC_Pro, toys, NES, FFCP, SNES, 3d_print, videogames, stl,...
9
9.0
Apr 28, 2021
04/21
by
Beau Lanphier (Jangles1981)
data
eye 9
favorite 0
comment 0
Recently I have rediscovered a part of my childhood with playing my old NES and SNES games. After multiple hours of fun reliving my past there was one issue for both systems, my hands are to large for the old controllers. This SNES controller grip feels more like a Playstation or XBOX controller in your hand which is what I have grown accustom to. It is also more ergonomic than the original as well. Hope you enjoy it as much as I have! *Update* Added second file with two holes for easy release...
Topics: thingiverse, FFC_Pro, controller, games, FFCP, NES, SNES, 3d_print, videogames, stl,...
9
9.0
Apr 28, 2021
04/21
by
Beau Lanphier (Jangles1981)
data
eye 9
favorite 0
comment 0
Three different jewelers file handles. Will fit files with 1/8" shank diameters but can be reamed out for larger diameter shanks as well. I got sick and tired of jabbing my palms with the butt end of these files and thought I should design handles to alleviate this problem. All three work very well at avoiding this problem. Enjoy!
Topics: hand_tools, thingiverse, 3dprinting, FFC_Pro, file, tools, FFCP, tool_holder, Hand Tools, 3d_print,...
On Feb. 11, 2011, NASA Ames hosted more than 55 Twitter followers or "tweeps" from 18 states and 5 countries to learn about the Center's research activities. Recent planetary discoveries by the Kepler mission and science flights by NASA's SOFIA aircraft were two featured topics of discussion. The "tweeps" toured several facilities at Ames, including the Kepler labs, where mission data is analyzed; the Vertical Motion Simulator, the world's largest motion-based flight...
Topics: Where -- Sofia, nasa, ames, tweetup, tweep, twitter, kepler, sofia, vms, ffc, future, flight,...
Source: http://youtu.be/GlRZIofJnYI
Topics: ffc, assy, docking, board, harness, connector, fpc, confidential, docking station, usb, board side,...
8
8.0
Jan 17, 2021
01/21
by
Laurent Molina (LaurentRueil)
data
eye 8
favorite 0
comment 0
I found this very beautiful slim case made by thatdude333: https://www.thingiverse.com/thing:1415895 But, it wasn’t possible to have a whole on the bottom face for my heatsink (really necessary??). So I have copied/remixed his case with: - Additional Fan 3x3 cutout on top - Specific inside corridor to optimise airflow - Added cutout for back heatsink - Different top versions for Nothing/Camera/Camera+Screen ribbons Case used for AstroPrint. Works very well with FlashForge Creator Pro.
Topics: Raspberry_pi_3, stl, case, AstroPi, FFCPRo, thingiverse, Raspberry_Pi, FFCP_2016, FFC_Pro,...
178
178
texts
eye 178
favorite 0
comment 0
Service Manual: HP L1940T R2
Topics: rst, chirr, color, ohm, lcd, monitor, kohm, smd, louf, dio, rst chirr, lcd color, color monitor,...
Topics: Youtube, video, Film & Animation, 27. FilmFestival Cottbus, FilmFestival Cottbus 2017,...
79
79
texts
eye 79
favorite 0
comment 0
Service Manual: Panasonic TY TP50P30K
Topics: remove, solder, touch, ffc, removal, screws, escutcheon, panel, usb, diagnostic, touch panel, free...
Topics: screw, sheet, lcd, ffc, fpc, evf, knob, mic, pes, parts, parts assembly, pes remarks, description...
11
11
Apr 27, 2021
04/21
by
Beau Lanphier (Jangles1981)
data
eye 11
favorite 0
comment 0
Searched and couldn't find a "29" Cribbage Board so I decided to design one. There is a slot for a drawer to hold the pegs for storage. There are four files in total. The main board, the drawer and two styles of pegs. I was able to print everything at 100% and have it all fit smoothly with very little sanding. The board is roughly 5.75" x 8.625" x .75". The text turned out great on my board but I am also using a .3mm nozzle. Enjoy!
Topics: boardgames, Card_Game, board_game, card_games, game, thingiverse, 3D_Print_It, Cards, 3d_toy,...
9
9.0
Mar 10, 2021
03/21
by
Beau Lanphier (Jangles1981)
data
eye 9
favorite 0
comment 0
Simple model, simple print, difficult puzzle. 14 pieces need to be printed in total. I printed the two center pieces red for cosmetics only. Having them in the center adds no difficulty as all pieces are printed exactly the same. I hope this puzzle is challenging to all that try. Enjoy!
Topics: thingiverse, 3d_print, Fidget_Toy, 3d_games, toys, FFCPRo, toy, 3dprintable, 3D_puzzle,...
10
10.0
Apr 28, 2021
04/21
by
Beau Lanphier (Jangles1981)
data
eye 10
favorite 0
comment 0
Simple coaster with the Seahawks logo. Enjoy!
Topics: Kitchen & Dining, drink_coaster, 3dprintable, thingiverse, beer_coaster, 3D_printing, FFC_Pro,...
10
10.0
Apr 28, 2021
04/21
by
Beau Lanphier (Jangles1981)
data
eye 10
favorite 0
comment 0
I like gears and thought it would be cool to have coasters with a set of gears inside. Everything snaps together nicely without any post printing work and the gears spin freely. The coasters can be taken apart to clean if needed or even glued to be permanent.
Topics: gears, Kitchen & Dining, drink_coaster, Fidget_Toy, Roller_Coaster, thingiverse, beer_coaster,...
9
9.0
Apr 28, 2021
04/21
by
Beau Lanphier (Jangles1981)
data
eye 9
favorite 0
comment 0
I like gears and thought it would be cool to have coasters with a set of gears inside. Everything snaps together nicely without any post printing work and the gears spin freely. The coasters can be taken apart to clean if needed or even glued to be permanent. Enjoy!
Topics: gears, heart_valentines_day, hearts, Kitchen & Dining, drink_coaster, Fidget_Toy,...
