2
2.0
Aug 8, 2021
08/21
by
Marina (korotyshka)
data
eye 2
favorite 0
comment 0
Topics: door_catch, door_closer, door, door_handle, thingiverse, bolt, Door_bolt, door_lock, Other,...
44
44
audio
eye 44
favorite 0
comment 0
Asheville Synergy Story Slam
Topic: Door to Door
8
8.0
Apr 17, 2021
04/21
by
Chris Tophe (Chris480)
data
eye 8
favorite 0
comment 0
a corner stop door . Bloque porte de coin . dimensions = 100 mm x 50 mm H ; 01 mm to 15mm
Topics: coin door stop, Organization, door stop, door, door_lock, coin door, thingiverse, stl, coin
2
2.0
Jul 23, 2021
07/21
by
Zvi Winograd (zviwin)
data
eye 2
favorite 0
comment 0
Holds a door stop Printing: Pin - PLA infill 20% Holder - TPU infill 60% NO SUPPORT NEDDED
Topics: door, door_stopper, stl, thingiverse, door_hook, Household, door_stop
9
9.0
Apr 23, 2021
04/21
by
Chris B (Knuckles343)
data
eye 9
favorite 0
comment 0
Screen door latch spacer. you will probably need to scale it to the thickness needed.
Topics: DIY, screen_door, door_stop, door_handle, screen_door_latch, block, thingiverse, stl, door_spacer,...
5
5.0
Mar 5, 2021
03/21
by
Alexandr Ssss (glukofinder)
data
eye 5
favorite 0
comment 0
door lath , door lock
Topics: stl, door, door_lock, Outdoor & Garden, door_catch, Door_latch, door_lath, lock, thingiverse
Illustrates styles of door ornamentation
Topics: Door fittings, Door knobs
7
7.0
Jan 16, 2021
01/21
by
JROS (JROS_PRINTR)
data
eye 7
favorite 0
comment 0
A simple key for pocket door locks. One with a hole in the center coming soon.
Topics: thingiverse, pocket door, 3D Printing, stl, key door pocket, door pocket key, door pocket, pocket...
8
8.0
Apr 17, 2021
04/21
by
Grayson McTaggart (HipHippyFreak)
data
eye 8
favorite 0
comment 0
I needed a door slam bracket because my old one broke. 3D printed it on a monoprice select plus with monoprice filament.
Topics: door bracket, patio_door_bracket, door stop, door, 3D Printing, thingiverse, stl, Door_latch
9
9.0
Apr 21, 2021
04/21
by
John Fuoco (fjohn624)
data
eye 9
favorite 0
comment 0
This is a device intended to keep people from accidentally bumping the lock button on our office door. This was a common problem and became quite irritating the next time someone wanted to come in. The door can still be locked by pressing the button through the printed guard so the lock still works as intended. It is attached using adhesive backed hook and loop strips
Topics: thingiverse, antilock, door handle, stl, door lock, office door, Door_Handle_Cover, Office, door
4
4.0
Apr 1, 2021
04/21
by
Johan Stokka (JayKeyStk)
data
eye 4
favorite 0
comment 0
This is used to hold a door (European style door handle) in the open position against a wall. There must be a wall (or other object) about 90 degrees perpendicular to the door in closed position. (The reason why I needed this, is that the door is slightly scewed, and will close slowly on its own. Yes, I do know this could also have been adjusted and fixed rather easily with a screw driver. I chose to fix it with a 3D printer :-p ) I used thick double-sided tape (2 cm wide) to stick the door...
Topics: bathroom door, Household, thingiverse, door handle, door holder, door, stl
4
4.0
Mar 31, 2021
03/21
by
Chris Preen (Preen)
data
eye 4
favorite 0
comment 0
This is a door handle bumper I drew up for the Lockwood/Assa Abloy Spire Velocity door handle. It just saves having to put a door stopper on the wall etc. Print orientation should be correct. Print with 2x perimeters min. The long bumper is to suit a situation (like I have) where the pivot end of the handle is "in fresh air" and it requires a bumper further down the handle. I would suggest printing this one in elastic (the pics show it printed in eSun eLastic). Please let me know if...
Topics: doorstop, Household, thingiverse, door_handle, door, door_stopper, stl, door_bumper
11
11
Jan 14, 2021
01/21
by
Shawn (kresty)
data
eye 11
favorite 0
comment 0
(We now recommend the [Mk IV latch...](https://www.thingiverse.com/thing:2504324)) Our cat was sneaking out by unlocking the patio door and then sliding it open, so this is designed to deter that behavior. Thing 2504324is a much better version, see https://www.thingiverse.com/thing:2504324 https://youtu.be/HceijEKUhk8 This is an "alpha" version, it needs a little help. * Flops down when open, so you can't shut it. * Doesn't stay up so you can lock yourself out too easily * Could have...
Topics: thingiverse, stl, Household, Door Latch, Door Lock, Sliding Door Latch, Door Stop, Sliding Door Stop
newinnovativeenterprises@gmail.com for more information or 520-443-0607
Topic: More sales door to door to door
4
4.0
Jan 9, 2021
01/21
by
Koo Neshat (Kookookoo)
data
eye 4
favorite 0
comment 0
I created this cylinder to fit inside a typical bore for a door knob when replacing interior doors. the hole on the door is 54mm. i created this in Fusion at 53mm and change. it fits snuggly in the bore. the main purpose is to align to doors together when replacing interior doors since the new door will typically need to be shaved down. very basic. 20% infill was strong enough for me to twist into place and use a little force behind it. it worked like a charm.
Topics: thingiverse, stl, door knob, door, door bore, Household
Title from cover
Topics: Door fittings, Door knobs
6
6.0
Jan 21, 2021
01/21
by
Cody Pierce (PKKShadow)
data
eye 6
favorite 0
comment 0
I think this is a good design. Let me know if anyone would like the files to change this to their liking. It seems to work fine for my carpeted floors. Second version has the base hollowed out. Figured people would like this one more as it uses less filament.
Topics: door_stopper, stl, thingiverse, Household, door, door_stop
3
3.0
web
eye 3
favorite 0
comment 0
Door to Door Life Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Door to Door Life Wiki, door_to_door_lifefandomcom
6
6.0
Mar 3, 2021
03/21
by
Julien PYTEL (Julienpytel)
data
eye 6
favorite 0
comment 0
It's an extension for door latch ds2274.
Topics: door latch, Household, door, thingiverse, stl, door striker
11
11
Mar 18, 2021
03/21
by
Diogo Sergio (diogorsergio)
data
eye 11
favorite 0
comment 0
Simple Hook for 44mm thickness doors, with a thin profile of 1.6mm.
Topics: door_hook, door, door_hanger, thingiverse, Organization, stl
4
4.0
Apr 13, 2021
04/21
by
Paul Liu (Boogiemann)
data
eye 4
favorite 0
comment 0
Have you ever had this happen to you? http://www.thingiverse.com/thing:636350 It did for me. I designed this to prevent future door damage. By increasing the surface area of the door contact, the force on the door is significantly reduced.
Topics: thingiverse, door_hinge, door_stop, Household, broken_door, doorstop, door_stopper, upgrade, stl,...
4
4.0
Apr 16, 2021
04/21
by
thomaas neder (mixlover)
data
eye 4
favorite 0
comment 0
***3D printable DOOR KNOB *** ** download ** open file ** resize to the size you want ** slice it !! ** print it !! *** ENJOY*** this door knob will do 100% what you expect ( it will open doors) but not just reagular doors - **DOORS** to a whole new world of posabiletys\!! whit startygicly placed holes to make it fit every door !
Topics: door_kno, door, thingiverse, door_knob, b, stl, door_kob, wooden_door_kno, 3d_door, 3d_printer,...
4
4.0
Jul 25, 2021
07/21
by
Crizzle Shizzle (crizzle)
data
eye 4
favorite 0
comment 0
Sprung Door Stop (Heavy Duty Chunky Style) This sprung door stop is fixed onto a skirting board to stop the door handle bashing off the wall. This is a heavy duty style stopper with thick spring required (links below). Ideal for children's bedrooms where the door is continually getting bashed open. It is quite chunky at c.46mm diameter and has options for longer and shorter stop lengths and end pieces. There are two rubber end pieces but these can also be printer in hard plastic. Barrel,...
Topics: bedroom, thingiverse, kids, sprung door stop, designer door stop, kids bedroom, door-stop,...
9
9.0
Jan 12, 2021
01/21
by
Lance Faler (lgfaler)
data
eye 9
favorite 0
comment 0
Our sliding closet doors have the circular hole style of pulls. The old cups that were in these doors were tarnished and bent and needed replaced, but we couldn't find the correct size anywhere. So, I created these cups to replace them.
Topics: Closet_Door, thingiverse, stl, door_pull, door_handle, Replacement Parts, sliding_door
10
10.0
Apr 17, 2021
04/21
by
Allan H (ZeAllan)
data
eye 10
favorite 0
comment 0
Our garden door would open itself a few centimetres if not locked from one side or another. This causes draught, escaping dogs and all kinds of unwanted by-products when we are just in the garden for a bit and don't want to lock the door from the outside. This bracket keeps the door closed but stille easily pushed open. It uses flat round 20mm diameter neodynium magnet with a hole in the middle. One os affixed to the door and another glued to this bracket. The door is closed and the bracket...
Topics: door_hook, door, thingiverse, stl, Household, Door_latch
4
4.0
Mar 26, 2021
03/21
by
Rick L (Ricklmesa1)
data
eye 4
favorite 0
comment 0
(UPDATE 4/4/20) I've included the autodesk and step file for anyone who needs to modify it. I got tired of the tiny handle that was on the outside of my sliding glass door, just enough for my finger nails to grip. I designed this in fusion. A simple basic design but it works. I used 15% infill for the handle and 70% for the flat area where the screw holes are and it seems to be holding up fine. The screw holes are about 124.76 mm apart, center hole. I will gladly share a different file type to...
Topics: stl, door_handle, Household, thingiverse, sliding_door, door
4
4.0
Mar 16, 2021
03/21
by
Wolfgang Maslo (wolfx1985)
data
eye 4
favorite 0
comment 0
Door handle diameter 20 mm.
Topics: door, thingiverse, door_stopper, Protection, doorstopper, door_handle, stl, Household, door_stop
4
4.0
Jun 11, 2021
06/21
by
(Misterguru)
data
eye 4
favorite 0
comment 0
Summary The bottom around my door (the jamb) to the garage had water damage about 6 in up. So I cut them off with a vibrating saw at 7 in. After modeling the jam and brick molding, I decided to use leftover filament since it will be caulked and painted. It should be standard size for all the metal doors that are sold in the USA at least. This is a 7.063" one-piece fix for my door, also stackable 1" tall pieces that need no support (No top on them, but have filament dowell holes for...
Topics: exterior, garage, Garage_Door, repair, moulding_door, door_moulding, service_door, brick_mould,...
4
4.0
Apr 12, 2021
04/21
by
Jurgen Close-Schibig (captainscience)
data
eye 4
favorite 0
comment 0
This is a taller version of another sliding door guide. Original --> http://www.thingiverse.com/thing:70747 I made this to go with doors that are hung slightly higher off the ground. This works with sliding doors 5mm apart or further, with a max distance of 80mm apart from the outside of each door.
Topics: thingiverse, sliding_door, stl, Other, tools, door, door_guide, sliding_door_guide
4
4.0
Apr 13, 2021
04/21
by
Brian govoni (bgovoni)
data
eye 4
favorite 0
comment 0
When you need your door stopper to be in style....
Topics: thingiverse, door_stop, door_stopper, stl, door, Office
10
10.0
Jul 21, 2020
07/20
by
Center for Accessible Technology in Sign
movies
eye 10
favorite 0
comment 0
ASL vocabulary
Topic: door
19
19
software
eye 19
favorite 0
comment 0
9
9.0
Mar 12, 2021
03/21
by
Derek MacCallum (dmaccallum)
data
eye 9
favorite 0
comment 0
Thought something different for your door frames would be nice. Happy printing
Topics: thingiverse, Door Molding, Decor, Molding, stl, Door, Door Frame
8
8.0
Apr 17, 2021
04/21
by
Larry McGovern (elkayem)
data
eye 8
favorite 0
comment 0
Our kitten is a year old now, and not a kitten anymore! I originally designed the [Small Pet Door Wall Frame](https://www.thingiverse.com/thing:1729360) so our cat could go from the house to the garage, where his litter box is located. Now he is too big for that little door, so I redesigned the frame for the medium Ideal Pets pet door, with a 7" x 11.5" opening. The Ideal Pet door is a quality product with a vinyl flap and lock-out slide, and runs about $22 from many retailers. Out of...
Topics: Dog_Door, thingiverse, stl, Pet_Door, cat_door, Pets
7
7.0
Jan 20, 2021
01/21
by
Lane Twellman (RankyT)
data
eye 7
favorite 0
comment 0
Latch for inside door frame.
Topics: Door Knob, thingiverse, door, Household, Door latch, stl, hardware
6
6.0
Jun 20, 2021
06/21
by
Sergey Zaitsev (SergeyZA)
data
eye 6
favorite 0
comment 0
Door handle Door with a mirror.
Topics: door_handle, thingiverse, door, stl, Household Supplies, door_knob
4
4.0
Apr 1, 2021
04/21
by
Wile E. Coyote (confusedCoyote)
data
eye 4
favorite 0
comment 0
A simply sharp doorstop with the help of a cactus!
Topics: door_stop, Household, thingiverse, door, door_stopper, stl
5
5.0
Apr 5, 2021
04/21
by
Andrew Soh (visualvalhalla)
data
eye 5
favorite 0
comment 0
The handle to my screen door broke - can't find a replacement at Home Depot so I made one. This is designed with the following mounting dimensions - please measure before printing as it be slightly different for your door - hole diameter: 8.5mm dia - mounting hole distance (center-to-center): 76.5mm - mounting hole to screen door edge (from hole center): 13mm
Topics: thingiverse, door_handle, bug_screen_door, Replacement Parts, stl, screen_door, sliding_door
4
4.0
Mar 13, 2021
03/21
by
Henry Chung (pathfinderzero)
data
eye 4
favorite 0
comment 0
This is a 3-inch long garage door bottom seal for Overhead brand thermacore Garage Door. I have a Overhead Garage door and the bottom door seal weatherstrip is in good shape except for a 2-3 inches section near one end. Overhead door uses their proprietary door seal and it's hard to find anywhere. Instead of replacing the entire door seal, I decided to make a 3-inch section and print it using TPU. It came out great. I used 25% infill and 0.34 layer height.
Topics: Garage Door, thingiverse, Replacement Parts, stl, Garage Door Seal, Door Weather Strip, Overhead...
10
10.0
Jun 20, 2021
06/21
by
Nick Danger (Dewolla)
data
eye 10
favorite 0
comment 0
Built custom sliding barn doors using purchased hardware. This came with little door guides that run in a slot on the bottom of the door. Once installed I realized the doors could have been closer to the floor and thus closer to the guides. On occasion and with wood movement the guides would come out of the tracks. I created these to be taller but otherwise an exact replica of the original. Update: 8/25/2019 Added another version that is 1/4 inch taller (6.5mm taller)
Topics: sliding_door, Closet_Door_Guide, thingiverse, Closet_Door, door_guide, closet, stl, barn_door,...
4
4.0
Mar 9, 2021
03/21
by
Pierre print (PierrePrinting)
data
eye 4
favorite 0
comment 0
Hi first model LIKE LIKE LIKE FOLLOW ME LIKE LIKE LIKE FOLLOW ME LIKE LIKE LIKE FOLLOW ME
Topics: door coat hook, stl, thingiverse, door upgrade, doors, door tool, Household, coat, door, door coat,...
4
4.0
Oct 14, 2021
10/21
by
Mr. Gins (Georgeo_3D)
data
eye 4
favorite 0
comment 0
Door Stopper Original file size: 40 x 20 x 29 mm You can scale one of the main axis to set the appropriate length
Topics: thingiverse, stl, Other, door, holder, door_holder, glass_door_holder, door_stop
9
9.0
Apr 28, 2021
04/21
by
Steve C (HubbleStubble)
data
eye 9
favorite 0
comment 0
This is a remix of a remix. Basically, the issue with the original door stays was that they were not the length of a standard door stop (~8cm, for example [here](http://amzn.to/2diYMvf)). So, I extended the stop and widened the base of the "nub side" to provide a bit more strength. I printed these with a [Monoprice Select Mini](http://amzn.to/2hupgRS) using [Warm White eSUN PLA+ 1.75mm](http://amzn.to/2yUaoUj) filament. I would recommend trying something with flex and durability like...
Topics: doorstop, Household, thingiverse, door_stop, door_stay, Catch, stl, door, door_catch
4
4.0
Mar 15, 2021
03/21
by
Michael Hövelmeier (Michi72)
data
eye 4
favorite 0
comment 0
This is my first own designed Part that i needed for my Patio Door outside the House. It is an normal easy Design. It is 7cm long and 5,5cm High.
Topics: door, thingiverse, patio, door_handle, stl, Household, Patio_door
3
3.0
Mar 15, 2021
03/21
by
Ek Christophe (PapouxXx)
data
eye 3
favorite 0
comment 0
A slding door handle design for my dressing-room. Une poignée de porte coulissante pour ma garde-robe I've add a 100% infill around the holes in Ideamaker. J'ai rajouté 100% de remplissage autour des trous pour la solidité dans Ideamaker. Filament : https://www.arianeplast.com/pla-eco-arianeplast/1194-pla-eco-noir-175mm-1kg-3760276363762.html
Topics: sliding_door, door, thingiverse, Other, handle, door_handle, stl
5
5.0
Mar 3, 2021
03/21
by
Eran Knaz (Shmilcat)
data
eye 5
favorite 0
comment 0
A single Sided door knob for gate. two options - one smooth, the other with finger hold dents no support or raft needed
Topics: door_handle, Household, door, thingiverse, door_knob, stl, knob
9
9.0
Apr 30, 2021
04/21
by
Jefferson Sanchez (mrjefferson105)
data
eye 9
favorite 0
comment 0
Today i bring you a simple doorstop that I made on solidworks The stl is small you will have to scale it up in simplify3d or slicing program you might have . I made it 70 mm long Don't forget to subscribe to Mr jefferson 105 for more useful stuff
Topics: stl, doorstop, door_stop, door_stopper, Household, door, thingiverse
3
3.0
Jan 7, 2021
01/21
by
Joe webster (Jwebs2020)
data
eye 3
favorite 0
comment 0
Just my design of an Old Style door pull or knocker. You just need some screws. I got mine from old cupboard door hinges.
Topics: stl, Decor, knob, door, thingiverse, door_handle, door_knocker
3
3.0
Jan 8, 2021
01/21
by
Sabir Ahmed (Sabir2012)
data
eye 3
favorite 0
comment 0
This is a door handle which I designed to use as a replacement for a damaged one. This design doesn't have a metal coil in it to keep the lever upright, instead it relies on the spring inside the latch. Therefore it is important to make the mating faces smooth.
Topics: stl, lever door handle, door, thingiverse, door_handle, DIY
2
2.0
Dec 13, 2021
12/21
by
Travis Kerzic (travio)
data
eye 2
favorite 0
comment 0
I replaced the rollers on this pocket door about 2 years ago. Slowly but surely they will move (too much force on the handle, slamming...etc.) I adjusted them back again, and again...until the adjuster failed to hold its position. I don't want to go through that again, so I designed a position lock tab. Adjust the door so it closes flush. Hold the tab up to the bolt, and estimate how much to trim, so the bottom fits against the top of the door. Trim it...until it fits. Push it in with a little...
Topics: Household, door, stl, Pocket Door, sliding door, thingiverse, slide
