7
7.0
Apr 19, 2021
04/21
by
Pavel Pavlov (xplp)
data
eye 7
favorite 0
comment 0
https://youtu.be/uz-8NUoAz9U
Topics: thingiverse, stl, arduino, attiny85, DIY
4
4.0
Mar 31, 2021
03/21
by
Pavel Pavlov (xplp)
data
eye 4
favorite 0
comment 0
https://youtu.be/QuQryNwIh0s Parts for assembly: attiny85 touch ttp223 led strip ws2812 or ws2801 star model is better to print at 106%
Topics: arduino, thingiverse, attiny85, DIY, stl
6
6.0
Mar 16, 2021
03/21
by
Pavel Pavlov (xplp)
data
eye 6
favorite 0
comment 0
https://youtu.be/xKOdJ1h5EiM
Topics: attiny85, arduino, stl, thingiverse, DIY
5
5.0
Mar 5, 2021
03/21
by
Cristopher Dahlström (opheophe)
data
eye 5
favorite 0
comment 0
Small case for Attiny and neopixel
Topics: stl, case, Electronics, attiny85, thingiverse, neopixel
9
9.0
Apr 26, 2021
04/21
by
PrCTRL (Printcontrol)
data
eye 9
favorite 0
comment 0
I was fascinated of the Keyring Game and programming an Attiny85 with Arduino UNO ...took some efforts to get it done but is worth evey minute. Thanks for that funny thing The quality of the housing is not that perfect - so I redesigned it original: http://www.thingiverse.com/thing:473749 have Fun
Topics: attiny85, stl, thingiverse, Electronics
5
5.0
Mar 16, 2021
03/21
by
Manel Torrecilla (manelto)
data
eye 5
favorite 0
comment 0
This is a remix of my box for Digispark Attiny85 (https://www.thingiverse.com/thing:4725682) The original does not work with some of my laptops. This one does.
Topics: thingiverse, arduino, Electronics, attiny85, stl
3
3.0
Jan 7, 2021
01/21
by
Tom Dierckx (tomdierckx)
data
eye 3
favorite 0
comment 0
I build a new version of my [air quality station](https://www.thingiverse.com/thing:4262574), this one is portable and battery powered. Now with the quarantine and all I spent a lot of time in my home office and I wanted to now if being in a room for that long has a noticeable impact on the Air. Not totally scientific but it an amazing reminder to open up the windows once in a while." This is the case containing the electronics I pushed the code and documentation about the electronics to...
Topics: stl, thingiverse, DIY, AirQuality_sensor, attiny85
5
5.0
Mar 16, 2021
03/21
by
Manel Torrecilla (manelto)
data
eye 5
favorite 0
comment 0
This is a remix of my box for Digispark attiny85. The original doesn't work on some of my laptops. This one does. You can see the original to see how the microcontroller is placed in the box: https://www.thingiverse.com/thing:4725682
Topics: thingiverse, arduino, Electronics, attiny85, stl
4
4.0
Apr 11, 2021
04/21
by
Juan Biondi (yeyeto2788)
data
eye 4
favorite 0
comment 0
This is a kind of lamp that you can light up with color changing led (RGB Led or even an addressable Led like the WS1812). I made hole in the center of the base so you can insert cable or a 5 mm led. Hope someone like this lamp! If you have any question or recommendations they will be highly appreciated. UPDATE November 3, 2014 17:38 = There was a mistake on the output file, I just uploaded a .rar folder with the new output. I tested them on Slicer, and Cura and they work fine. I have to...
Topics: thingiverse, WS1812, Art, Attiny85, stl, Lamp, Arduino
9
9.0
Jan 19, 2021
01/21
by
Pavel Pavlov (xplp)
data
eye 9
favorite 0
comment 0
https://youtu.be/uhI2R9C3P6k attiny85 TCRT5000
Topics: thingiverse, attiny85, TCRT5000, DIY, stl
10
10.0
Jan 14, 2021
01/21
by
Malcolm Kögler (mal90)
data
eye 10
favorite 0
comment 0
simplified and adjusted to fit better untested
Topics: 3D Slash, thingiverse, stl, Other, attiny85
4
4.0
Apr 1, 2021
04/21
by
Aversenq Patrick (Patave)
data
eye 4
favorite 0
comment 0
Boitier de programmation des Attiny via l'interface USBasp Permet de se plug facilement aux Breadbord format standard Les encoches de raccordement peuvent être corrigées pour une meilleur fixation
Topics: thingiverse, programmer, attiny85, USBASP, DIY, stl
4
4.0
Mar 19, 2021
03/21
by
Daniel Zrinyifalvi (zdanee)
data
eye 4
favorite 0
comment 0
This is a clamshell style case for the TinyJoypad gameconsole, focusing on minimal footprint and minimal number of parts. Games and wiring instructions here: https://sites.google.com/view/arduino-collection/tiny-joypad?authuser=0 BOM: - Attiny85 DIP8 (one for each game) - DIP8 socket (if you plan to change games later) - 1x 128x64 SSD1306 I2C OLED (0.96", 4pin) - 4x 6mmx6mm silent tactswitches (through hole) - 1x 12x12mm tact switch (through hole) - 1x 9x3.6mm slide switch (if you want to...
Topics: case, videogame, Video Games, tinyjoypad, attiny85, thingiverse, stl
3
3.0
Jun 10, 2021
06/21
by
Robert Tidey (bobtidey)
data
eye 3
favorite 0
comment 0
Enclosure to hold Adapter to make a 12V battery charger fed from a laptop power brick. Uses XL4015 buck converter with current limit. ATTiny (Digispark) monitors and controls charging and shows results on an OLED display Enclosure supports a small fan to assist with heat dissipation. Construction details https://www.instructables.com/Car-Battery-Charger-Adapter/.
Topics: Automotive, ATTiny85, XL4015, thingiverse, Battery charger, stl
5
5.0
Mar 26, 2021
03/21
by
John (KiwiGrinder)
data
eye 5
favorite 0
comment 0
Digispark is small system based on a ATtiny85 micro-controller and is programmed using the Ardunio IDE via a USB port. It is great for those projects that don't require a lot of IO pins or use large sketches. While the board is small, sometimes you may want to incorporate the ATTiny85 onto you own printed circuit boards. Once programmed, the USB socket and associated components are no longer required. However most commercial Digispark systems use a SMD variant of the ATTiny85 that is soldered...
Topics: stl, Development_Board, attiny85, thingiverse, Electronics, Digispark
6
6.0
Mar 22, 2021
03/21
by
Baseem Al-Sabbagh (Baspro)
data
eye 6
favorite 0
comment 0
Hi, Here is a credit card sized handheld case for Space Invaders game created with the aid of attiny85 microcontroller. Circuit design, schematics, components, and software were available @ https://sites.google.com/view/arduino-collection/tiny-joypad Enjoy!
Topics: space invaders, stl, case, Games, attiny85, game, thingiverse
5
5.0
Mar 5, 2021
03/21
by
アロー明和 レーシング (arrowmeiwaracing)
data
eye 5
favorite 0
comment 0
This is the case for Digispark. Digispark is a microcomputer equipped with ATTINY 85.
Topics: stl, arduino, Digispark, usb, attiny85, Electronics, thingiverse
8
8.0
Jan 17, 2021
01/21
by
Tyler Gerritsen (td0g)
data
eye 8
favorite 0
comment 0
These are the case options for an ATTiny85-Driven Intervalometer. More info at https://gerritsendesign.wordpress.com/2017/12/13/attiny85-driven-intervalometer-diy/
Topics: tm1637, camera, Camera, thingiverse, attiny85, timelapse, stl
4
4.0
Mar 20, 2021
03/21
by
(zasf)
data
eye 4
favorite 0
comment 0
This is an **ATtiny85** based version of filament width measurement tool. It is based on flipper's **TSL1401CL** filament width measurement tool. Video: http://youtu.be/iWMkjmjx1MI The LED on top of the tower casts the shadow of the filament on the TSL1401CL sensor. It is a line of photodiodes. Sensor output is read by ATtiny85 MCU and processed. Analog output signal (1,75 volts = 1,75mm) can be read by newest Marlin version for filament width compensation, that is adjusting extruding speed...
Topics: tsl1401cl, stl, attiny85, filament_width, thingiverse, Other
3
3.0
Jan 6, 2021
01/21
by
Klaus Snyder (snyder3)
data
eye 3
favorite 0
comment 0
Sensor case for a DHT22 with ATTiny85.
Topics: DHT22, stl, 433mhz, thingiverse, 18650, Electronics, attiny85
5
5.0
Mar 5, 2021
03/21
by
Martin Pihrt (pihrt)
data
eye 5
favorite 0
comment 0
SMD Srdce: https://pihrt.com/elektronika/288-smd-srdce-s-12-led-a-attiny85 SMD srdce s 12 LED. Celé zařízení je napájeno z baterie CR2032 (knoflík) a je řízeno procesorem ATtiny85. Pomocí tlačítka lze navolit jeden z 5 režimů blikání (efektů).
Topics: DIY, stl, arduino, Heart, smd, game, attiny85, thingiverse
7
7.0
Apr 20, 2021
04/21
by
(TheDIYGuy999)
data
eye 7
favorite 0
comment 0
This housing / shell / enclosure is for Geekcreit 40x60mm prototype boards from Banggood: https://www.banggood.com/Geekcreit-10pcs-40x60mm-FR-4-2_54mm-Double-Side-Prototype-PCB-Printed-Circuit-Board-p-1257151.html?utm_campaign=4828314_1046285&utm_content=1097&p=NZ29024828314201605E It can be used for little, permanent circuits like my DIY Arduino ISP programmer for Pro Micro and ATtiny85 microcontrollers. It prevents your board from shorting out, if you move it around on your table. A...
Topics: thingiverse, stl, Electronics, programmer, attiny85, ISP, AVR, Arduino
5
5.0
Apr 20, 2021
04/21
by
Cad Mium (Cadm1um)
data
eye 5
favorite 0
comment 0
Case for Digispark USB development board. Use epoxy-resin for potting after the board is inserted. We noticed that the USB development boards are sold with different thicknesses of the pcb (1.6mm or 2mm). This case is for the 2mm version, which you should prefer because it fits better to most USB ports than the 1.6mm version.
Topics: thingiverse, pendant, Digispark, stl, Electronics, case, attiny85
12
12
Jan 18, 2021
01/21
by
(BB11)
data
eye 12
favorite 0
comment 0
Case for Attiny85 USB Mini Dev Board.
Topics: Electronics, ATtiny85, arduino, thingiverse, arduino_case, stl
6
6.0
Mar 16, 2021
03/21
by
Yutaka Fujimoto (mace-man)
data
eye 6
favorite 0
comment 0
Custom version of the Digispark attiny85 BadUsb fake usb memory case. https://www.thingiverse.com/thing:2347216/remixes https://youtu.be/tSDfa6qJ9-8
Topics: thingiverse, Tool Holders & Boxes, digispark_case, attiny85, stl
3
3.0
Mar 13, 2021
03/21
by
John (KiwiGrinder)
data
eye 3
favorite 0
comment 0
This electronic skeet shoot game is based on a concept by masonhorder (https://www.instructables.com/id/DIY-Aurduino-LED-Game/). Video --------- https://youtu.be/5qr4b2HbMCg Design -------- Most of the design is in the layout of the printed circuit board. It becomes the front panel for a simple box that was created using OpenSCAD. Since the PCB is the front panel, all components that are not required by the user are mounted on the back of the PCB. To continue to use DIP packages for both the...
Topics: thingiverse, LED, MAX7219, game, Shoot, attiny85, stl, Electronics
7
7.0
Jan 7, 2021
01/21
by
Robert Tidey (bobtidey)
data
eye 7
favorite 0
comment 0
An enclosure for an ATTiny Capacitor meter. Construction details at Instructables https://www.instructables.com/ATTiny85-Capacitor-Meter/
Topics: capacitance, stl, Capacitor, ATtiny, meter, thingiverse, Electronics, attiny85
3
3.0
Mar 26, 2021
03/21
by
John (KiwiGrinder)
data
eye 3
favorite 0
comment 0
This Christmas tree uses a tree designed by J.Daniel Herrera. I have 3D printed a new base and created a small PCB to hold an ATTiny85 to drive the tree. Jingle Bells ------------ https://youtu.be/glbZrCg2oF4 Snoopys Christmas ----------------- https://youtu.be/eZCdyNJIgME Christmas Tree PCB ------------------------ I have included the PDF with the board layout. I just printed the PCB layout from the PDF on to glossy paper using a laser printer and made the PCB using the Toner method....
Topics: stl, attiny85, thingiverse, LED, Electronics, WS2812b, Digispark, christmas_tree
8
8.0
Apr 16, 2021
04/21
by
Rodney Adams (Lymkin)
data
eye 8
favorite 0
comment 0
I didn't have a programming clip, so I created this SOIC8 (ATTiny85) chip holder so I could prototype using my breadboard. Each hole for breadboard jumpers are at an angle so there is plenty of clearance. There is a hole under the chip so you can eject it easily. There is a chip orientation marker. (albeit very small). I would mark with a black marker! It's a teeny tiny chip, just be careful inserting your chip because you already know the pins are very fragile. Try to lower it straight so as...
Topics: diy, thingiverse, stl, SOIC8, attiny, attiny85, Electronics, electronics, breadboard
6
6.0
Apr 27, 2021
04/21
by
Mr. Camarium Mr. Camarium (mrcamarium)
data
eye 6
favorite 0
comment 0
Un box piccolo in stile Kali Linux per il nostro Digispark Hacker
Topics: Computer, thingiverse, linux, kali_linux, attiny85, stl, Digispark, kali
5
5.0
Mar 5, 2021
03/21
by
Martin Pihrt (pihrt)
data
eye 5
favorite 0
comment 0
https://pihrt.com/elektronika/394-tik-tak-bomba-s-attiny-85 Tik tak bomba s procesorem ATTINY 85 je časovač podobný časovači ve hře "Tik Tak Bum" ovšem lepší :-D (můj nemá tlačítko, ale otřesový snímač, má LED, a hlasitost 2W...). Hra "Tik Tak Bum" obsahuje papírové karty - každá z nich umožňuje vytvořit pomocí slabik na obou stranách různá slova. Elektronickou bombu nastartujeme pomocí zatřesení. Bomba exploduje pokaždé v jiném intervalu v...
Topics: DIY, stl, arduino, bomb, tictactoe, game, attiny85, thingiverse
5
5.0
Mar 16, 2021
03/21
by
Oscar Eriksson (Trixigt)
data
eye 5
favorite 0
comment 0
Just LOVE the original thing: https://www.thingiverse.com/thing:4561617 But i´m usually into threaded inserts, but only when i need them. For this usage i don´t think inserts is needed so i remade the "body" to use M3 bolts just threaded by themself, and a version where you use the screws that come with seratain servos.
Topics: thingiverse, Useless Machine, arduino, attiny85, servo, Mechanical Toys, stl
3
3.0
May 20, 2021
05/21
by
John (KiwiGrinder)
data
eye 3
favorite 0
comment 0
This mini cube is made up of six 4x4 WS2812B panels giving a total of 96 individually addressable RGB LEDs. Buried inside the cube is a ATTiny85 microcontroller powered by a 120mAh Lithium Ion battery. It also contains a mercury switch and a couple of transistors to turn the cube on. The cube switches itself off after displaying a series of animations. Video ------ https://youtu.be/mVqQSdfhl90 Assembly --------- 3D print the holder for the panels with supports and a raft. After you clean off...
Topics: Digispark, thingiverse, attiny85, ws2812, WS2812b, Electronics, arduino, stl
2
2.0
Apr 24, 2021
04/21
by
Robert Tidey (bobtidey)
data
eye 2
favorite 0
comment 0
This is an enclosure for a simple 12V car battery monitor with traffic light indicator of battery health. It holds a digispark type ATTiny85 module plus an Add on protype board contining some extra components. Holes are provided for 3 LEDs and a connector for the 12V supply from the battery. An instructable describes this at https://www.instructables.com/id/Tiny-12V-Monitor/.
Topics: attiny85, battery, stl, thingiverse, car, 12v, Electronics, monitor
5
5.0
Mar 5, 2021
03/21
by
Martin Pihrt (pihrt)
data
eye 5
favorite 0
comment 0
H2O: https://pihrt.com/elektronika/350-attiny-85-alarm-vyteceni-vody Jistě znáte situaci vytopení sousedů, nebo bytu vodou... Tento obvod s procesorem ATtiny 85 za "pár korun" řeší tyto nepříjemnosti. Obvod obsahuje pouze baterii CR2032 (3V), procesor ATtiny85 SO8, piezoměnič, SMD LED diodu 1206, blokovací kondenzátor 100nF 1206 a dva SMD rezistory 1206 (10K a 1M)... Po vložení baterie máme 5 vteřin na položení obvodu na místo (kde chceme detekovat vodu) - tento...
Topics: DIY, stl, h2o, arduino, alarm, attiny85, water, thingiverse
4
4.0
Mar 15, 2021
03/21
by
Robert Tidey (bobtidey)
data
eye 4
favorite 0
comment 0
A macro Infra Red remote control allowing up to 10 different sequences of mult-device commands to be initiated from a single button press. Software is at https://github.com/roberttidey/ATTinyIR Instructable at https://www.instructables.com/AT-Tiny-Techniques-in-a-Macro-IR-Remote/
Topics: thingiverse, macro, Electronics, attiny85, stl, infrared, Remote_control
3
3.0
Apr 24, 2021
04/21
by
Krizash (Krizash)
data
eye 3
favorite 0
comment 0
Real circuit board in Fusion 360 for your projects
Topics: electronics, attiny85, DIY, components, ATtiny, stl, microprocessor, thingiverse
5
5.0
Mar 5, 2021
03/21
by
Martin Pihrt (pihrt)
data
eye 5
favorite 0
comment 0
Kostka SMD: https://pihrt.com/elektronika/290-kostka-smd-se-7-led-a-attiny85 Celé zařízení je napájeno z baterie CR2032 (knoflík) a je řízeno procesorem ATtiny85. Pomocí tlačítka lze spustit hod kostkou (při držení se losuje po uvolnění se vybere náhodné číslo). Zařízení v režimu vypnuto je uspáno (sleep) a po cca 0,5 vteřině se probouzí a zjišťuje zda je stisknuto tlačítko. Tento způsob šetří životnost baterie.
Topics: DIY, stl, arduino, game, Kostka, attiny85, cube, thingiverse
4
4.0
Mar 5, 2021
03/21
by
Martin Pihrt (pihrt)
data
eye 4
favorite 0
comment 0
Kužel: https://pihrt.com/elektronika/367-led-kuzel Pro B-ROBOTA jsem si postavil dráhu "ala silniční kužel". Samozřejmě samotný kužel není tak efektní bez blikání a v tuto chvíli přichází na řadu Arduino IDE a mikroprocesor ATTINY85. Zařízení napájí baterie CR2032 - 250 mAh (3V) a je velice jednoduché (obsahuje pouze tlačítko, baterii, LED, mikroprocesor, dva rezistory a jeden kondenzátor)... Mikroprocesor spí (odebírá z baterie proud řádově 5uA),...
Topics: DIY, stl, arduino, traffic_cone, attiny85, thingiverse, cone
5
5.0
Apr 20, 2021
04/21
by
Bruce Ratoff (bratoff)
data
eye 5
favorite 0
comment 0
Little Wire is a project by Ihsan Kehribar. It's kind of an ATtiny85-based USB Swiss army knife gadget that it can be used to implement a bunch of different hardware interfaces (parallel, I2C, SPI, ADC, 1Wire, WS2812, PWM, UART, AVR programmer) over a USB port. You can read more at the project website: http://littlewire.github.io/ I claim no credit for the electronics - I used the Eagle files on Ihsan's website to get a board made and then populated it - but I did think his project deserved a...
Topics: thingiverse, stl, Electronics, arduino, AVR_Programmer, attiny85, ATtiny, usbtinyisp
5
5.0
Mar 9, 2021
03/21
by
Bruce Ratoff (bratoff)
data
eye 5
favorite 0
comment 0
Remixed sej7278's tray to work with my multi-type ICSP programming breakout board. Loved the snap-in concept and just had to adjust the board dimensions to fit. The board has a 20-pin ZIF socket and can program any thru-hole AVR chip of 20 pins or less. Separate 6-pin ICSP headers are used to select the chip type and additional jumpers are provided for similar chips with minor differences. There are also socket pins provided for 3-pin ceramic resonators to accommodate chips that were already...
Topics: Electronics, bumper_case, stl, thingiverse, ATtiny, avr, ATTINY2313, attiny85, AVR_Programmer
3
3.0
Oct 14, 2021
10/21
by
Bob Hoskins (Megazoid)
data
eye 3
favorite 0
comment 0
What is it? A simple video game console that plays ATtiny85 games "cartridges". Initially it was designed to play ATtiny85 games written by Daniel Champagne, but there are other people that have designed games that work on this platform. Obviously the files on Thingiverse are just the case files The PCB designs, and component list needed to complete this project can be found on hackaday.io. It's not too expensive to make, although the components list is bit long at 20 items. I...
Topics: thingiverse, stl, attiny85, Video Games, videogame, tinyjoypad, Handheld_Game_Device
3
3.0
Jun 11, 2021
06/21
by
Patrick Wulfert (wpatrick)
data
eye 3
favorite 0
comment 0
I've created a new USB Volume Knob, that fits for a simple rotary encoder and a Digispark ATtiny85 with micro USB. If you have a rotary encoder with 20mm half handle, to avoid the volume knob is becoming very high, the semicircular mount on the rotary encoder must be shortened by approx. 4mm.On the aother hand, you can take a rotary encoder with 15mm half handle. You can find instructions, the sketch and the wiring diagram under: https://learn.adafruit.com/trinket-usb-volume-knob/wiring You...
Topics: volume_control, Electronics, Digispark, thingiverse, volume_knob, attiny85, stl
6
6.0
Mar 18, 2021
03/21
by
Enol Matilla (boreack)
data
eye 6
favorite 0
comment 0
Little case for Detroit Become Human Led proyect.
Topics: LED, Detroit, stl, thingiverse, detroit_become_human, attiny85, Hobby
8
8.0
Apr 23, 2021
04/21
by
Max Kern (Wingman94)
data
eye 8
favorite 0
comment 0
This is a sensor that keeps track of your posture and warns you if you are slouching. More information: http://coretechrobotics.blogspot.de/2016/03/a-diy-wearable-posture-sensor.html
Topics: attiny85, wearables, ATtiny, posture, stl, Gadgets, arduino, sensor, thingiverse, case
4
4.0
Apr 12, 2021
04/21
by
Paul waterfield (P4LIL)
data
eye 4
favorite 0
comment 0
a 3d printed electronic colour egg timer, rotate to select hard or soft, times set in code. designed for the #CountertopChallenge video https://youtu.be/_Izagx-EP9M 3d printed egg timer, uses attiny 85 and 3 x ws2812 LEDs to time either a hard or soft boiled egg. Times are set in software. A tilt sensor detects which way up the egg is to set the timing. The device is powered by 3 x AA batteries in sprung loaded holders inside the egg. When not in use it is put to sleep and draws very little...
Topics: thingiverse, attiny85, Kitchen & Dining, egg_timer, arduino, CountertopChallenge, stl, ws2812
5
5.0
May 1, 2021
05/21
by
Oliver Andreas Wendlinger (Goldeagle_54321)
data
eye 5
favorite 0
comment 0
Small Digispark case. I needed the case so i quickly designed one and thought i could upload it here too. The screwhole in the back is for securing the board and mounting the case, M3 or M4 screw will fit, with printed standoff on the back. I've printed them with support only on bed, because of the standoff. The gap where the usb goes in is bridgeable.
Topics: stl, rev3, attiny85, housing, arduino, Electronics, thingiverse, case, Digispark
10
10.0
Jan 19, 2021
01/21
by
Lindsey Own (LindseyOwn)
data
eye 10
favorite 0
comment 0
This is basically an assembly of several other Things, to be able to hold an ATTiny85 and 3 tiny LR44 hearing-aid batteries. (We got a ton of expired Duracell 675s at a garage sale, so I made this to help us work our way through those... Three seems perfect to run an ATTiny and a few LEDs!) I used it to be the battery/microcontroller pack for an LED necklace running a flickering Arduino sketch, and it sat on the back of my neck. I'm also planning to use it on a hairclip to be a pack for some...
Topics: battery_holder, thingiverse, attiny85, ATtiny, battery, stl, Fashion, microcontroller
10
10.0
Apr 23, 2021
04/21
by
Shana Robinson (Shaputer)
data
eye 10
favorite 0
comment 0
This is a USB Tiny Case that gives access to both ports and a good view of both LEDs.
Topics: usb, attiny85, ATtiny, atmega, stl, ATTINY2313, usb_tiny_isp, thingiverse, Computer, attiny45
4
4.0
May 1, 2021
05/21
by
Tatuca More (Tatucamore)
data
eye 4
favorite 0
comment 0
attiny85 arduino case
Topics: stl, badusb, attiny85, velleman, arduino, VMA108, Electronics, thingiverse, arduino_case
