4
4.0
Aug 22, 2021
08/21
by
Vary generic (aannuat594)
data
eye 4
favorite 0
comment 0
Dominus from Rocket League. I filled in the original model using 3D Builder to make it solid and much more printer-friendly. I also included the Stern wheels that will snap in to the axles, or you can use any of the other wheels on my profile along with the "Wheel_addon" file to make them compatible. I recommend printing the tires separately out of Varioshore TPU (or regular TPU is fine too) with 3 perimeters and 0 infill, but I included the wheels as one piece just in case.
Topics: dominus_rocket_league, rocket_league_cars, dominus, rocket_league_dominus, Vehicles,...
4
4.0
Mar 16, 2021
03/21
by
Vary generic (aannuat594)
data
eye 4
favorite 0
comment 0
Various wheels from Rocket League. These are a bit outdated and do not include most of the wheels that come from crates. Getting the game files takes a lot of time and I have not done it in a while. Some export weird and may not be printable. Sorry, I haven't tried most of them but I didn't see many Rocket League wheels on Thingiverse so I figured it was better than nothing.
Topics: thingiverse, rocket_league_model, wheels, rims, wheel, Rocket_League, rocket_league_rims,...
5
5.0
Mar 16, 2021
03/21
by
Vary generic (aannuat594)
data
eye 5
favorite 0
comment 0
There are about 20 Rocket League cars missing at the time this was uploaded. Some models either didn't export correctly or don't open in the first place, plus it is a little bit out of date. I don't think it is possible to get the console exclusive cars either. I am currently working on trying to get more cars, but it takes a while and the cars have code names which makes it more confusing. I have a couple printable cars as of now in my designs, and I have a separate design page for wheels. I...
Topics: Vehicles, car_bodies, thingiverse, rocket_league_car, car_body, rocket_league_cars,...
2
2.0
Aug 22, 2021
08/21
by
Vary generic (aannuat594)
data
eye 2
favorite 0
comment 0
Roadhog XL from Rocket League. I filled in the original model using 3D Builder to make it solid and much more printer-friendly. I also included the Foreman wheels that will snap in to the axles, or you can use any of the other wheels on my profile along with the "Wheel_addon" file to make them compatible. I recommend printing the tires separately out of Varioshore TPU (or regular TPU is fine too) but I included the wheels as one piece just in case you can't do multimaterial.
Topics: rocket_league_cars, roadhog, rocket_league_model, Vehicles, rocket_league_car,...
10
10.0
Jan 20, 2021
01/21
by
Mike Dasaro (PsychItsMike)
data
eye 10
favorite 0
comment 0
I used the octane and Dieci obj files from: [https://grabcad.com/library/all-rocket-league-car-object-files-a-few-bonus-s-1] along with the octane from DerpyEyed's upload. I simplified the model a lot in 3D builder, then edited it in Tinkercad. I removed the wheels and left a universal mount, so you can print any wheels from that grabcad, scale them, and put them on. It seems printable, I'm printing a 100mm version right now, and then I might change a few things before printing a larger one.
Topics: Rocket_League, Games, octane, rocket_league_car, dieci, thingiverse, rocket_league_model, stl
2
2.0
Aug 8, 2021
08/21
by
Vary generic (aannuat594)
data
eye 2
favorite 0
comment 0
Breakout car from the game Rocket League. I modified the model to make it much easier to print and to allow for the snap-in wheels. I included files to print the wheels as one solid part, or separate for multi-material. I also included the original Breakout file ripped straight from the game in case you want to modify it yourself. I printed the body and rims using ASA, and the tires were printed with Varioshore TPU (3 perimeters at 220C). The wheels should snap into the axles without...
Topics: breakout_rl, thingiverse, breakout, rocket_league_model, rocket_league_cars, breakout_car,...
0
0.0
web
eye 0
favorite 0
comment 0
Rocket League Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Rocket League Wiki, rocket_league_kfandomcom
5
5.0
Mar 16, 2021
03/21
by
Vary generic (aannuat594)
data
eye 5
favorite 0
comment 0
X-Devil mk2 from Rocket League. If you want to get straight to printing, use the "Printable" file, or you can edit the 3mf file in Windows 3D Builder if you want to tweak it a bit. Otherwise you can start with the original game file. I included the season 3 Challenger reward wheels because I used those with my file. Other wheels and cars will be uploaded under different designs.
Topics: Vehicles, x_devil_mk2, thingiverse, rocket_league_cars, x-devil_mk2, rocket_league_model, x_devil,...
BLS logo for podcast
Topics: Video Games, Rocket League
9
9.0
Jan 16, 2021
01/21
by
Jason Harriot (Montiey)
data
eye 9
favorite 0
comment 0
This is my model of the Rocket League crate key (October 2017). Since there currently exists only ONE image of the official key, no one has seen the back of it… I had to guess a little bit, but it's probably not far off from what the artist had in mind. Print in two pieces & glue together, then paint for best results. See "paper.svg" and "paper.png". Paste into Word / Pages, then set the size to 33.25mm x 42mm. Just be sure your scaling settings are 1:1.
Topics: rocket league cars, rocket league model, Models, rocket, thingiverse, car, crate, cars, key,...
8
8.0
Jan 19, 2021
01/21
by
Vlad Roiban (vxr_lucky)
data
eye 8
favorite 0
comment 0
Dracos from game rocket league. Dragon Head by hartrox here: https://www.thingiverse.com/thing:328253 which I cut in pieces was used for the dragon head, rest was designed solely by me in Tinkercad. Also, sorry if you have trouble removing supports from beneath the dragon head, but that's how the wheels are in-game, so it would be kind of different if it were any other way.
Topics: Rocket_League, Video Games, Draco, Wheels, thingiverse, Dracos, stl, Rocket_League_Wheels
11
11
Jan 14, 2021
01/21
by
Zeke Torres (niqqachu99)
data
eye 11
favorite 0
comment 0
Grand Champion icon for key-chain or necklace.
Topics: Rocket_League, thingiverse, Accessories, stl
9
9.0
Jan 20, 2021
01/21
by
Eric Arvic3d (arvic3d)
data
eye 9
favorite 0
comment 0
Basic Rocket League logo coaster with logo inset and beautiful fillet edges.
Topics: Rocket_League, Decor, stl, thingiverse
9
9.0
Apr 28, 2021
04/21
by
lukas something (link0007)
data
eye 9
favorite 0
comment 0
two-part Rocket League ball with holes to insert typical 5mm LEDs. I used 4 LEDs so I could use the bottom hole for a 5mm toggle switch. For power I used a 9V battery. update: I added some struts to the bottom cover of the stand, so that it holds up the inlay. This removes the need to glue the inlay to the top cover.
Topics: Rocket_League, stl, thingiverse, Props
9
9.0
Apr 30, 2021
04/21
by
Lars (Maker_at_heart)
data
eye 9
favorite 0
comment 0
Hi, This is the 3D printable file of the Dominus GT car from the popular Rocket League game! Print it, clean it, paint it and enjoy it! Interested in more? Check out my instagram page @puka_ta All rights go to Psyonix official.
Topics: stl, thingiverse, Rocket_League, Games
5
5.0
Mar 12, 2021
03/21
by
Robyn Schmit (DethKake)
data
eye 5
favorite 0
comment 0
These were printed with a .4 nozzle with no support, make sure you position the connectors flat so support isnt needed for those. This connector is made for the Octane. As Hot Wheels releases more cars we will post more connectors to support those cars.
Topics: stl, Rocket_League, thingiverse, Models
10
10.0
Jan 18, 2021
01/21
by
Brian Bl (Bmb74)
data
eye 10
favorite 0
comment 0
I put a support bar on the bottom to make it more rigid
Topics: Rocket_League, stl, Games, thingiverse
11
11
Jan 18, 2021
01/21
by
ian AO4 (IanA04)
data
eye 11
favorite 0
comment 0
The Backfire is one of the worst cars in the game. According to some. Unsurprisingly, this makes it my favorite. The model file is gigantic, and should be printed at the finest resolution you can use. Mandatory resizing of wheels is mandatory.
Topics: Vehicles, Rocket_League, stl, thingiverse
11
11
Mar 9, 2021
03/21
by
Dero Eyed (DerpyEyed)
data
eye 11
favorite 0
comment 0
This is going to be some of the cars from rocket league. Leave a comment about which car I should add next. (And also which wheels I should put on it) Right now I only have one that I fixed yesterday. The reason there are no pictures is because my first print had incorrect settings for the support, the model itself came out amazing but I wasn't able to remove the support and broke one of the pieces. I have fixed the models from the game to be able to be printed. (Because the models from the...
Topics: Vehicles, stl, thingiverse, Rocket_League
0
0.0
web
eye 0
favorite 0
comment 0
Rocket League and Top Gun Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Rocket League and Top Gun Wiki, rocket_league_and_top_gunfandomcom
8
8.0
Apr 17, 2021
04/21
by
Rikesh Dhirajlal (rikesh_dhirajlal)
data
eye 8
favorite 0
comment 0
Rocket League Merc Keyring. Probably will print much better with an SLA printer as some of the details are too small for FDM printing
Topics: MERCS, Rocket_League, thingiverse, Games, stl
9
9.0
Mar 12, 2021
03/21
by
Ben Jones (Jamin_Jones)
data
eye 9
favorite 0
comment 0
These are the logos for Season 4 of Rocket League Competitive. My main idea when making this was to print it and then wire LED's to a behind each logo. These would be connected to some kind of wireless computer (Arduino maybe?), which could contact the Rocket league servers and display your current rank in all 4 competitive modes.
Topics: stl, thingiverse, Rocket League, 3D Printing
1
1.0
web
eye 1
favorite 0
comment 0
Rocket League Prices,Items, and trading Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Rocket League Prices,Items, and trading Wiki,...
5
5.0
Mar 3, 2021
03/21
by
cody walls (cod1357)
data
eye 5
favorite 0
comment 0
———————————————————————————————————————— EDIT ———————————————————————————————————————— Thank you to all for your patience while I fixed up this file for these past few days, it should now be ready to print. I am going to begin a test print to ensure that all is well and I will post my results here once it is finished. You may print it if...
Topics: thingiverse, 3D Printing, Rocket_League, stl
3
3.0
Jun 11, 2021
06/21
by
Qwer Tyuio (Max3dmodeler)
data
eye 3
favorite 0
comment 0
Remix 2
Topics: cars, rocket_league_car, Vehicles, rocket_league_model, car, vehicles, toy, vehicle, thingiverse,...
4
4.0
Mar 8, 2021
03/21
by
Daniel Pasquella (The_Fightin_Tech_Crew)
data
eye 4
favorite 0
comment 0
A quick model i made up in inventor Scale to whatever size you would enjoy ._. i never tested it though...
Topics: keychain, Rocket_League, stl, thingiverse, 3D Printing
6
6.0
Mar 31, 2021
03/21
by
aaron buck (abuck2251)
data
eye 6
favorite 0
comment 0
rocket league bookmark
Topics: 3D Printing, bookmark, thingiverse, rocket league, stl
9
9.0
Jan 19, 2021
01/21
by
Yeebok Shuin (Yeebok)
data
eye 9
favorite 0
comment 0
Taken from the game files and heavily optimised to be one single solid mesh. Wheels used are 'Invader'. No overlapping polygons, edges or vertices. No open edges. 0 errors on the STL Check modifier in 3DS. Enjoy.
Topics: Video Games, Rocket_League, thingiverse, Animus, stl
20
20
Jan 10, 2021
01/21
by
Robin Clower (brvsirrobin)
data
eye 20
favorite 1
comment 0
Rocket League logo, great for keychains.
Topics: video_game, thingiverse, Games, stl, Rocket League
14
14
Jan 13, 2021
01/21
by
Rikesh Dhirajlal (rikesh_dhirajlal)
data
eye 14
favorite 0
comment 0
This is the car Merc from the popular game Rocket League. The car prints in 2 parts so you will need to glue them together after printing The wheels attach using a Klik Joint (https://www.myminifactory.com/object/klik-4568). This was one of my first designs created for 3D printing in Solidworks so its not very optimized for 3D printing and does require some support material
Topics: thingiverse, stl, Toys & Games, Rocket_League, rocket
4
4.0
Jan 7, 2021
01/21
by
Ethan Child (ethanchild)
data
eye 4
favorite 0
comment 0
This is just a model I made based on "Octane Boost" by Klutch just re-made it, tweaked it a bit, and added a snow day puck! Please leave feedback on how I can make this better!! Made using models from "Rocket League snow day puck" by link0007, "Rocket League Car(s)" by DerpyEyed, and "gCreate Official Rocket Ship" by gCreate.
Topics: stl, Rocket_League, Sculptures, Snow_Day, thingiverse
5
5.0
Mar 10, 2021
03/21
by
Mike Dasaro (PsychItsMike)
data
eye 5
favorite 0
comment 0
This is a printable model of a Fennec from Rocket League Credit to Adam Williams for the original model (https://www.artstation.com/notadam) I cleaned up the shells and made it solid for printing, thickened the wing, and used some Dieci wheels I had from another design. Just print the Fennec as is, supports shouldn't be needed, then print 2 of each type of wheel and glue together. Check out my collection for more car models:...
Topics: car, stl, thingiverse, rocket league, Models, fennec
9
9.0
Apr 18, 2021
04/21
by
Mike Harmon (theroar)
data
eye 9
favorite 0
comment 0
Loved the original by AzianLad, but the supports made a mess of it when I printed it. I put it in meshmixer and had it print at a angle so there was a good part of it attached as a base. It is printed quite well since. I do add raft to help guarantee success. I had some trouble with the spoiler snapping off so I created V2 with slightly thicker arms. Will print it in the morning to test unless someone beats me to it. =)
Topics: Meshmixer, supports, Rocket_League, thingiverse, stl, Vehicles, Octane
6
6.0
Apr 16, 2021
04/21
by
(SpaceCowboy850)
data
eye 6
favorite 0
comment 0
This is my car from the game Rocket League. I modeled it myself and have tried to make it as printable as possible, though the chassis proved very difficult to do that with. I hate using supports but I had to acquiesce this time.
Topics: Football, Rocket_League, Soccer, Car, thingiverse, stl, Vehicles
1
1.0
Apr 20, 2022
04/22
by
Charl Visser (ClockworkzAI)
data
eye 1
favorite 0
comment 0
This is a prototyped I haven't tested it out yet The ball is from https://www.thingiverse.com/thing:1865445
Topics: thingiverse, Rocket_League, Headphone_stand, Video Games, stl
4
4.0
Mar 9, 2021
03/21
by
Andrew Fahrenholtz (PlasmaEye)
data
eye 4
favorite 0
comment 0
My rendition of the Rocket League Champ logo.
Topics: Rocket_League, stl, thingiverse, champion, Signs & Logos, logo
4
4.0
Mar 9, 2021
03/21
by
(bungwu)
data
eye 4
favorite 0
comment 0
Remixed the original design with an adapter that will mount the Rocket League toy cars sold by Target. Turned out pretty well. https://www.target.com/b/rocket-league/-/N-bg10j You will need glue for the logo.
Topics: Rocket_League, stl, thingiverse, trophy, Toy & Game Accessories
5
5.0
Mar 4, 2021
03/21
by
Manuel Wiedmann (Portaeris)
data
eye 5
favorite 0
comment 0
The Takumi is my favourite car in Rocket League. This model is based on the files that have been extracted directly from the game. Added some material to the model to improve printing. Like to see your makes. Have fun and keep on gaming! v1.2: The wheels are now attached more naturally. The gap between tires an fenders is filled. The geometry on the underbody got more links to the chassis v1.3: Filled another gap between underbody and chassis. The infill of the difusors at the back is now...
Topics: Games, Takumi, thingiverse, video_game, stl, Rocket League
9
9.0
Apr 28, 2021
04/21
by
lukas something (link0007)
data
eye 9
favorite 0
comment 0
A reproduction of the snow day hockey puck in Rocket League. Be careful that the bottom surface has a lot of intricate details and can be difficult to print correctly. If you are unable to print the bottom side, try slicing the object in half and print both halves with the details on the top-side.
Topics: thingiverse, Rocket_League, stl, puck, hockey_puck, Props
4
4.0
Apr 21, 2021
04/21
by
Tachyo Free (Tachyo)
data
eye 4
favorite 0
comment 0
Hello, this is my reworked Venom Model from Rocket League. It is designed to be printed in multi color. Most parts can be put together without glue. There are two type of rims, the first is the orginal "Vortex" from the game an the second is a cutomized drop-center rim from me. Hope you like it.
Topics: thingiverse, stl, Rocket_League, Vehicles, Car_model, Venom
5
5.0
Apr 20, 2021
04/21
by
Orlando Silva (oa1)
data
eye 5
favorite 0
comment 0
I saw a thread on Reddit (posted by /u/akshayakss, of a design made by /u/wloaf77, thank you both!) and decided to 3D print the logo. I made minor edits to the original design by adding details on the soccer ball and car wheels. On thingfiles section you will find both the single color and multi color STLs as well as the corresponding Fusion 360 files if you want to play with them. The multi color file requires manual changes of filaments, this is not ready for MMU version. See instructions for...
Topics: thingiverse, psyonix, stl, rocket, Video Games, Rocket_League
9
9.0
Jan 15, 2021
01/21
by
Jon Alexander (Jeoncs)
data
eye 9
favorite 0
comment 0
I was surprised to see that there wasn't much for antenna topper options so here is my first up. I went with a 4.5mm hole diameter which seemed to be the most common on amazon. Added a 8mm hole option because my Jeep was much larger.
Topics: thingiverse, Automotive, stl, Rocket League, Antenna Topper, Antenna, Disconnect
3
3.0
Jun 21, 2021
06/21
by
Enoch Kwong (Enocnoch)
data
eye 3
favorite 0
comment 0
Dominus model I attempted to make. I cut it in two pla at 215 run at 200mm/s
Topics: Video Games, octane, thingiverse, stl, rocket league, Dominus, rocketleague
2
2.0
web
eye 2
favorite 0
comment 0
Rocket League Esports Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Rocket League Esports Wiki, rl_esportsfandomcom
1
1.0
web
eye 1
favorite 0
comment 0
Rocket League Championship Series Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Rocket League Championship Series Wiki, rlcsfandomcom
3
3.0
Apr 8, 2021
04/21
by
David Meats (CobaltWolf)
data
eye 3
favorite 0
comment 0
This is Jeoncs's Rocket League Disconect Antenna Topper as a pen. If you like what I do consider adding a like to the model, or following. Both are greatly appreciated! If you do decide to print one of my models please post a make, its awesome to see my models being enjoyed by others.
Topics: league, Rocket_League, rocket, Office, logo, stl, pen, thingiverse, bic
6
6.0
Jan 4, 2021
01/21
by
Ja Ho (FinallyGC)
data
eye 6
favorite 0
comment 0
My best interpretation of the Grand Champion logo from Rocket League.
Topics: champion, stl, Video Games, rocket, award, Rocket_League, thingiverse, grand
3
3.0
Jun 11, 2021
06/21
by
Ash Martiain (AshMartian)
data
eye 3
favorite 0
comment 0
Taken from https://sketchfab.com/3d-models/octane-rocket-league-8c1bec6e9c1448a58a5007b1f21c8d21 Modified in Blender for optimal 3D printing and Multi Material / full color. Rotated -76.5 degrees on x axis, rotate positive 76.5 degrees to place car flat on tires. Sliced in Voxelizer Remove Overlapping, high shell count, 0.7 density/1.5 mm offset supports. Printed on Quad Crane
Topics: epic games, rocket, multi material, Video Games, thingiverse, rocket league, stl
3
3.0
Jun 11, 2021
06/21
by
Qwer Tyuio (Max3dmodeler)
data
eye 3
favorite 0
comment 0
This is remix.
Topics: cars, Vehicles, car, vehicles, toy, vehicle, Rocket_League, thingiverse, toys, stl
8
8.0
Mar 9, 2021
03/21
by
(Tactical_Dev)
data
eye 8
favorite 0
comment 0
Octane Dry Eraser - Reinforced where needed. Spoiler is separate for a better print. Print on end, front pointing up. Needed Parts: - Magnet void fits 10mm x 2mm magnets. ( at least 4 and up to 16 - I only used 6 and it holds great t on my magnetic whiteboard) - Felt or material for bottom to erase the whiteboard. ( I used the hook side of velcro, https://www.amazon.com/VELCRO-Brand-Sticky-Fabrics-Fasteners/dp/B00N0W85WA?ref_=bl_dp_s_web_2530720011) Office fun will be had!
Topics: Dryer, octane,, Games, stl, thingiverse, rocket league, rocket, eraser, dry erase,
