4
4.0
Apr 13, 2021
04/21
by
AOXI LUSPRIME (aoxilus)
data
eye 4
favorite 0
comment 0
UTEP ATB quadcopter parts Credits: Ramon Cardona and his TEAM AT STUDENTS
Topics: thingiverse, quadcopter_ipod, quadcopter_legs, x525_quadcopter, 3D Printing, quadcopter_x, stl,...
3
3.0
Mar 31, 2021
03/21
by
Yaroslav Vorobev (goodluck1702)
data
eye 3
favorite 0
comment 0
227mm iflight cidora sl5 frame
Topics: thingiverse, 250_quadcopter, Hobby, racing_quadcopter, Quadcopter_Frame, stl, Quadcopter
11
11
Apr 16, 2021
04/21
by
James Pekich (jimbob4040)
data
eye 11
favorite 0
comment 0
This has the original files for the Peon quadcopter along with my reimagined base with side walls. I'm sick of grass clippings getting in and around my components. Don't just print all the parts at once. Make sure you know which parts you want to use first. When you print the bottom canopy parts with the walls around you can start printing the bottom part in one color and then pause it and change the filament and finish printing the walls with a different color. That's how I got the two...
Topics: 250_quadcopter, quadcopter_racer, Quadcopter, Hobby, thingiverse, stl, mini_quadcopter, multicopter
7
7.0
Apr 18, 2021
04/21
by
Aleksandr krasnikov (llprokall)
data
eye 7
favorite 0
comment 0
Материал печати нейлон черный либо белый https://torgtovar.ru/category/zd-pprinter-i-komplektuyushchie/plastik-bestfilament/bfnylon/ карбоновые трубки 8 мм. размер 1шт. 265мм и 2шт. 127 мм. 4 шт.моторы garila 1500kv https://goo.gl/s4U1uf Регуляторы оборотов Racerstar tatto_s 35a 4 https://goo.gl/oRfyD8 Радиолинк ts100 мини m8n 8N GPS https://goo.gl/pZH3Q3 Этот лучше чем GPS...
Topics: Quadcopter, Hobby, thingiverse, stl, mini_quadcopter, Quadcopter_Frame
11
11
Jan 19, 2021
01/21
by
Aleksandr krasnikov (llprokall)
data
eye 11
favorite 0
comment 0
https://youtu.be/ho73nHIaHO8 quadcopter Bulavka Printing material nylon Вторая стенка зеркальность на 3d printet in the slicer 100 percent filling . weight 67 grams quadcopter Rechargeable Lipo Battery Gaoneng GNB 7.4V 450mAh 50C 2S Lipo Battery XT30 Plug https://goo.gl/drG2Rs 4 Pairs Gemfan Hulkie 2040 2.0X4.0 PC 3-blade Propeller CW CCW for 0806-1105 Motor https://goo.gl/CVMh2W Racerstar 1104 BR1104 7000KV Racing Edition 1S-2S Brushless Motor For RC Multirotor 100...
Topics: thingiverse, racing_quadcopter, Quadcopter_Frame, Hobby, mini_quadcopter, Mini_FPV_Quadcopter, stl,...
9
9.0
Apr 28, 2021
04/21
by
e2 mars (e2mars)
data
eye 9
favorite 0
comment 0
Quadcopter
Topics: racing_quadcopter, thingiverse, stl, RC_quadcopter, R/C Vehicles, 250_quadcopter, Quadcopter,...
8
8.0
Apr 17, 2021
04/21
by
Mohamed AL-ameen (ameen005)
data
eye 8
favorite 0
comment 0
easy to build and print micro quadcopter frame for 8,4mm prushed motors
Topics: Quadcopter, thingiverse, stl, micro_quadcopter, Engineering, Quadcopter_Frame
7
7.0
Jun 11, 2021
06/21
by
(descent32)
data
eye 7
favorite 0
comment 0
Summary This is a frame I'm building for my YMFC-AL that I have been working on for a few years now. I'm useing an Arduino Maga as my software has grown so much I just need a lot more pins and memory space. Again, this is something I'm tinkering with and soon I'll have my shield fully proven in this larger version as my 22 older versions have all been successful on just a Nano. Print Settings Printer: RepRap Clone Rafts: No Supports: No Resolution: 0.2 Infill: 50% Cubic Subdivision Filament:...
Topics: thingiverse, Quadcopter, Quadcopter_Frame, stl
14
14
Apr 16, 2021
04/21
by
Max de Feijter (maxdefeijter)
data
eye 14
favorite 0
comment 0
I just decided to try this! As of today, 9/5/15, I have NOT tested it. Please send pictures or comment if you make this!
Topics: Quadcopter, 3D Printing, thingiverse, stl, Quadcopter_Frame, Nano_Quadcopter
10
10.0
Jun 20, 2021
06/21
by
zoltan bzman (rgbskills)
data
eye 10
favorite 0
comment 0
##Required parts ### Frame * Printed parts: Top plate, Body, Battery separator TPU (Optional) * Other required parts: 8-M3 screws, 4-aluminium standoffs ( https://www.banggood.com/M3AR7-10Pcs-M3-20mm-Knurled-Standoff-Aluminum-Alloy-Anodized-Spacer-p-1118406.html?rmmds=myorder&cur_warehouse=CN ) ### Electronics * Flight controller - https://www.banggood.com/Eachine-32bits-F3-Brushed-Flight-Control-Board-Based-On-SP-RACING-F3-EVO-For-Micro-FPV-Frame-p-1076530.html * RX...
Topics: micro_quadcopter, thingiverse, Quadcopter_Frame, stl, Hobby, Quadcopter
13
13
Apr 16, 2021
04/21
by
Max de Feijter (maxdefeijter)
data
eye 13
favorite 0
comment 0
I recently made the other version of this, and I decided it looked a little flimsy. I hope this one might be stronger and better looking. I have not tried it, but if you do, please drop me a line in the comments to let me know any issues or how I can fix it! If you want to try to do so yourself, I can send you a copy of it and you can edit it!
Topics: Quadcopter, 3D Printing, quadcopter_legs, thingiverse, stl, Nano, RC_quadcopter, Quadcopter_Frame
12
12
Jan 11, 2021
01/21
by
(arons)
data
eye 12
favorite 0
comment 0
Simple quad copter frame, easy to mount and quite stable. PLA weight 9g. List of materials: [motors](http://www.banggood.com/Eachine-Flyingfrog-Q90-Micro-FPV-Quadcopter-Spare-Parts-2S-8_5x20mm-Coreless-Motor-p-1129842.html?p=HK19039051176201702A) [propellers](http://www.banggood.com/Wholesale-3-Set-Walkera-QR-Ladybird-Spare-Parts-Main-Blades-Propellers-QR-Ladybird-Z-01-p-47127.html?p=HK19039051176201702A) [fly...
Topics: R/C Vehicles, mini_quadcopter, thingiverse, stl, Quadcopter, Quadcopter_Frame, micro_quadcopter
6
6.0
Mar 16, 2021
03/21
by
(TinkerLifeProjects)
data
eye 6
favorite 0
comment 0
This is a frame designed for a micro-quadcopter. Links to all the electronics and other parts are available below. I recommend printing in PETG or ABS though semiflexible filaments produce more indestructible frames. There is a model with some of the detail removed if you want to try this. If so you may have to cut the motor mounts open and then hold them closed using either tape or even better; shrink wrap. The roof of the frame is only to hold the battery or mounting other things and is not...
Topics: micro_quadcopter, Quadcopter_Frame, mini_quadcopter, Quadcopter, stl, thingiverse, miniquad, frame,...
4
4.0
Mar 21, 2021
03/21
by
Jasper Weghorst (Islemunda)
data
eye 4
favorite 0
comment 0
This is my micro quadcopter V1 frame design. You can fly this quadcopter with Hubsan X4 electronics (8.5mm motors). I have also build a V2 frame design. Checkout my other Things!
Topics: drone, stl, micro_quadcopter, quadcopter, quadcopter_frame, thingiverse, R/C Vehicles,...
8
8.0
Jan 16, 2021
01/21
by
Eduard Ufirov (Vasa)
data
eye 8
favorite 0
comment 0
This is not a finished project (I'm not sure that I will end it). But it is possible for someone it will be useful. The idea is that the frame consists of four identical and interchangeable parts. the following components are used: 16×16 tinyFISH FC 16×16 tinyPEPPER 4in1 ESC 1 or 2s motor BR0703 or BR1103 40mm Propeller like these https://www.banggood.com/Eachine-Fatbee-FB90-Turbine-QX70-Micro-FPV-Racing-Quadcopter-Spare-Parts-40mm-4-Blade-Propeller-Set-p-1108674.html?rmmds=search or these...
Topics: quadcopter, multicopter, thingiverse, copter, Quadcopter_Frame, drone, Hobby, mini_quadcopter, stl,...
8
8.0
Apr 17, 2021
04/21
by
Radulescu Daniel (DaniRo)
data
eye 8
favorite 0
comment 0
This is a canopy for multicopter is measuring 130x100x57 mm.
Topics: Quadcopter, thingiverse, stl, multicopter, R/C Vehicles, Quadcopter_Frame, quadcopter_case,...
5
5.0
Jun 10, 2021
06/21
by
Leonardo S (Leonardo_S)
data
eye 5
favorite 0
comment 0
For a school project in Grade 10, each student had to create a product over the course of a semester. For my project I decided to design a mini-quadcopter. My goal was to design a portable mini-quadcopter and include step by step instructions made available on Thingiverse. The page includes high definition pictures and files of mini-quadcopter available for download. I fly my Volar with T-Motor 2204-2300kv, 5x3 Propellers, 12amp Afro ESC and Naze32, you know what I mean /;-) Features: Vibration...
Topics: miniquad, flying, quad, Vola_Quadcopter, mini_quadcopter, thingiverse, portable, RC, drone,...
10
10.0
Jan 10, 2021
01/21
by
Charles Dykstra (Multimechanica)
data
eye 10
favorite 0
comment 0
250mm Quadcopter frame with slide in replaceable arms. Camera mount also acts as backing for front arm screws and is best printed out of TPU or other flexible filament. Camera mount fits cameras 17mm x 24mm. Motor mount screw pattern is generic and should fit most 2204 motors. Screws for arms are #6-32 x 3/4".
Topics: quad, thingiverse, mini_quadcopter, R/C Vehicles, fpv_quadcopter, stl, fpv_racing, 250_quadcopter,...
4
4.0
Jun 10, 2021
06/21
by
Tim N Xiao (sakunamary)
data
eye 4
favorite 0
comment 0
After test flying the original design http://www.thingiverse.com/thing:34552 model ,I think top and bottom platform make some modifiy will make flying more stable , so I design a top and bottom flatform with degree anhedral angle .I have no experience that which angle is the best ,maybe 3° , 2°,or maybe 1°. I try 3° this time ,so I will provide the Freecad file ，everyone can change the angle easily .
Topics: mini_quadcopter, thingiverse, Quadcopter_Frame, R/C Vehicles, Quadcopter, stl
6
6.0
Mar 17, 2021
03/21
by
Andrew Willis (fpvlarge)
data
eye 6
favorite 0
comment 0
Version 3 all in one Dingo 100 micro quad. This version is a logical conclusion to my original design in that it has built in prop guards, but the caddx turtle mount is a work in progress! When I printed it out and checked, I found that the 2" props will foul the mount, unless the motors are inverted (which is pretty much how most micro quad motors are mounted theses days.. N.B I'm struggling to thicken the cam mount in Fusion, so ahve reverted to a platform to mount a generic fpv cam...
Topics: micro_quadcopter, Quadcopter_Frame, Quadcopter, stl, thingiverse, R/C Vehicles
14
14
Apr 16, 2021
04/21
by
Constantin Dragos Bejenaru (Draagood)
data
eye 14
favorite 0
comment 0
In this design the landing gear is driven by a 12 kg/cm servo. There is also a sonar placed looking down for automatic landing or other purposes you may find interesting. If you have suggestions on the design, please comment and I can adapt it to your idea. For the moment I am stuck with ideas on this design and I will start another soon. I made it so everything can be printed without support and still obtain decent quality. The main body should be printed with at least 30% infill in order to...
Topics: Quadcopter, thingiverse, stl, R/C Vehicles, Quadcopter_Frame, Quadcopter_Kit
2015 Hubsan x4 manual
Topic: quadcopter
10
10.0
Apr 22, 2021
04/21
by
Max de Feijter (maxdefeijter)
data
eye 10
favorite 0
comment 0
After many weeks of tweaking and refining, I am happy to finally release the many, many files of this piece! This micro quadcopter has lots of options... - 3 different top plates - choice of no camera or a 10 degree Spektrum VA1100 mount - 7 or 8.5mm motors - scale models of all parts (except a battery) including motors, props, a camera, and a choice of 2 flight controllers - designed for Hubsan or Quanum Pico flight controllers - designed with the Spektrum VA1100 in mind Below are the original...
Topics: Quadcopter, micro_quadcopter, stl, R/C Vehicles, thingiverse, Quadcopter_Frame
10
10.0
Mar 9, 2021
03/21
by
Kurtis Bell (rEVpO_3D)
data
eye 10
favorite 0
comment 0
*UPDATES AT BOTTOM* Printed this today after about 30 hours into it :P (3/5/16) so i havent had a chance to get parts and make sure everything fits perfectly. It has been designed with very particular parts in mind given the very small margin of room. I will list links to the parts it is designed to fit. Let me know what you think! Oh and RAMAC stands for (Redding Area Miniature Aircraft Club), so youll be sportin our name :P Parts: Motors & ESC's-...
Topics: R/C Vehicles, 150 quadcopter, stl, thingiverse, Quadcopter, ZMR250, micro_quadcopter, fpv,...
6
6.0
Jan 21, 2021
01/21
by
Alistair Mitchell (AlistairM)
data
eye 6
favorite 0
comment 0
This is a part I made for someone from photos, not sure quite what its use is but it should be dimensionally accurate. Please contact with any questions or changes.
Topics: thingiverse, Quadcopter, Quadcopter_Frame, Hobby, stl
8
8.0
Apr 4, 2021
04/21
by
Henry Kelleher (HTK8082019)
data
eye 8
favorite 0
comment 0
This is an M3 nut and bolt spacer. It is meant for the Hovership MHQ2. Such a bummer that Hovership shut down! To use, take a 10mm or more M3 bolt, and slide a nut into the slots. After that, just screw in the bolt. Enjoy!
Topics: thingiverse, R/C Vehicles, micro_quadcopter, drone_racing, 250_quadcopter, drone, Drones,...
8
8.0
Jan 15, 2021
01/21
by
Ben Hobby (benhobby)
data
eye 8
favorite 0
comment 0
These are the mods I've performed on my budget racing quadcopter. It's based around the super budget Lisam LS210 frame, and makes it smaller, lighter, and much cooler looking. It consists of: 1. A battery plate, which elevates the battery so it can sit on top of the receiver and half of the flight controller. It takes the place of the two aluminium standoffs at the back of the quad. 2. A top plate, which covers the electronics, and the battery. Mounts to the front four standoffs, and holds all...
Topics: Mini_FPV_Quadcopter, R/C Vehicles, thingiverse, mini_quadcopter, uavfutures, stl, QAV210,...
6
6.0
Jan 21, 2021
01/21
by
FPVFrame.ch (fpvframe_ch)
data
eye 6
favorite 0
comment 0
Here you can find all of our 3D Printed parts for the DoubleX and DiveX.
Topics: DoubleX, Drone, FPVFrame.ch, 250_quadcopter, FPV, thingiverse, FPVFrame, racing_quadcopter,...
8
8.0
Jan 19, 2021
01/21
by
Mr DaBrudda (Mr_Dabrudda)
data
eye 8
favorite 0
comment 0
A remix of the F450 quad arm by villamany Redesigned the arm to not need supports due to the overhangs in the design.
Topics: RC_quadcopter, f450, thingiverse, Quadcopter_F450, Quadcopter, R/C Vehicles, stl
8
8.0
Apr 17, 2021
04/21
by
olof nystrom (onmeow)
data
eye 8
favorite 0
comment 0
Simple two piece quad frame. The frame is 170mm and uses 4" props. (in my case 4045 4-blades) I wanted a frame for some old 1806 motors and other disused parts. But any motors that can swing a 4" prop and matching ESC and FC will do. The height 8 standoffs needs to be adapted to match the height of the PDB and any components below it. I used the following parts. DYS BE1806 https://www.banggood.com/DYS-BE1806-2300KV-Brushless-Motor-Black-Edition-for-Multicopters-p-946416.html Naze32...
Topics: Quadcopter, thingiverse, stl, mini_quadcopter, R/C Vehicles, quad, Quadcopter_Frame
9
9.0
Mar 10, 2021
03/21
by
Scott Parmelee (Parmsco)
data
eye 9
favorite 0
comment 0
Wanted to try out a different shape of Quad besides the typical X or H shape. Head over to the original model to download the arms. The battery does not have a good place to go, all suggestions are welcome! While I have not yet figured out how to calibrate my ESCs I decided to make this design, as you may be able to tell from the last photo ceilings and drones don't mix...
Topics: drone, R/C Vehicles, stl, thingiverse, Quadcopter, 250_quadcopter, Quadcopter_Frame, quad,...
9
9.0
Jun 11, 2021
06/21
by
(PetarSerbianDude)
data
eye 9
favorite 0
comment 0
Summary Realacc Genius 215 3K Frame
Topics: quadrocopter, thingiverse, Quadcopter_Frame, Quadcopter, stl
9
9.0
Apr 28, 2021
04/21
by
Allen Moore (lazypc)
data
eye 9
favorite 0
comment 0
I had tried a few quadcopter frames available and was really struggling to find something durable enough to survive a crash. So I set out to design one. The thought behind this is avoiding long straight arms, that way I can avoid putting as much leverage on the arm during impact. So that is why the main beams of the arm sweep into each other in a curve, avoiding direct angle pressure points and distributing the leverage force of impact. No idea if it will work, I have only flown once as I...
Topics: thingiverse, stl, R/C Vehicles, Quadcopter, mini_quadcopter, Quadcopter_Frame
9
9.0
Apr 24, 2021
04/21
by
Joe Pellegrino (JPel242)
data
eye 9
favorite 0
comment 0
This was a class project from the NCC Fab Lab. In this class we took a group of students and put them through their paces. The objective of the course was to teach them some basic CAD, 3D printing, laser cutting , vinyl plotting etc. Leonardo is a "+" style 450 quadcopter. We used a "+" configuration to make it easier for first time builders/ fliers to visualize how the flight system worked in relation to the air frame. As built Leonardo has the power and stability to do a...
Topics: Quadcopter, stl, 450 Quadcopter, R/C Vehicles, thingiverse, Quadcopter_Frame
9
9.0
Apr 26, 2021
04/21
by
Todsawat Thongsuk (todsawat)
data
eye 9
favorite 0
comment 0
This is 3D parts using with GE-220 X-type frame Frame : http://www.banggood.com/GE220-224mm-Carbon-Fiber-5mm-Arm-Support-6-inch-Propeller-with-Power-Supply-Board-Frame-Kit-p-1043506.html
Topics: thingiverse, stl, R/C Vehicles, Quadcopter, mini_quadcopter, Quadcopter_Frame
10
10.0
Jun 11, 2021
06/21
by
(JasonDr)
data
eye 10
favorite 0
comment 0
Summary Ever needed an excuse to start building Lego again? Now is the time! Turns out Lego bricks can be used to build a perfect symmetrical frame for your quadcopter! And... it's super cheap. I used Lego Technic because it has holes in the bricks. You can mount the motor's with tie wraps through the holes and it's an ideal weight reduction. For the motor's and flight controller I used parts from the famous Hubsan X4. http://www.banggood.com/buy/hubsan-x4.html?p=KX28152008068201507H Custom...
Topics: quadcopter_lego, diy, hubsan, quadcopter_frame, diy_quadcopter, Hubsan_x4, thingiverse, Diydrones,...
10
10.0
Jan 9, 2021
01/21
by
James Allen (jjamieallen)
data
eye 10
favorite 0
comment 0
as per title! Just like Punkkills 105, but modified for larger batteries, specifically Hobbykings 1000mah 1s flat battery. using these you can get flight times up to 12 mins! Enjoy!
Topics: R/C Vehicles, mini_quadcopter, thingiverse, stl, Quadcopter, Quadcopter_Frame
10
10.0
Apr 30, 2021
04/21
by
Max Daddario (maxd223)
data
eye 10
favorite 0
comment 0
Micro frame for 7mm brushless motors.
Topics: stl, drone, Quadcopter, micro_quadcopter, Hobby, mini_quadcopter, thingiverse, frame
6
6.0
Jan 20, 2021
01/21
by
(Haitchpeasauce)
data
eye 6
favorite 0
comment 0
## A 3D printed brushless micro FPV quadcopter frame featuring offset motors for smooth flights! Just wanted to share my first 2-inch frame design. I thought it would be fun to have a crack at designing a 3D printed quadcopter frame. Here are some cool features of the design: * Flipped top-bottom plates that allow motors to be mounted offset or inverted from each other so that the props ride in clean air. * Flexible build options, allowing 2, 3, perhaps 4 layer stack heights. * Backpack system...
Topics: thingiverse, Quadcopter, Quadcopter_Frame, R/C Vehicles, stl, micro_quadcopter
9
9.0
Mar 12, 2021
03/21
by
Josef Krinzinger (Rossini)
data
eye 9
favorite 0
comment 0
Remixe of the DJ105 Top Frame: stiffer but heavier design.
Topics: thingiverse, Quadcopter_Frame, Quadcopter, RC_Quad, dj105, RC_quadcopter, mini_quadcopter,...
10
10.0
Apr 23, 2021
04/21
by
Mark Villela (Markacho)
data
eye 10
favorite 0
comment 0
I love this arm! The design is closely based on the original EMAX 250, and with a solid resin print, it weighs only 14 grams versus the 10 grams for the original carbon fiber. This arm does not require the use of a spacer :D I left a handy access area where the arm connects to the quad's frame, so you won't need to unsolder your ESC wires when replacing a broken arm. The wires will fit straight through giving you a tidy assembly without fuss. Although it was first created using a Form1, the...
Topics: 250_quadcopter, emax_KnightHawk, quadcopter_arm, emax_nighthawk, EMAX, Quadcopter, RC_quadcopter,...
9
9.0
Apr 26, 2021
04/21
by
Max de Feijter (maxdefeijter)
data
eye 9
favorite 0
comment 0
So this is clearly inspired by the Foldable Brushed Microquad by ulflindestrom (http://www.thingiverse.com/thing:1604440), but here it's been totally remade from scratch for 6mm motors, Hubsan FC, and Eachine H8 Mini (45mm) props. At 75mm folded out, it's one of the smallest micros I've ever heard of! Not sure how big folded up, but it certainly ought to fit in your pocket. Enjoy! UPDATE 9:07PM 8/2/16: Added 7mm motor mounts for many who requested them :) make sure to cut your props to 45mm...
Topics: Nano_Quadcopter, thingiverse, multirotor, quadrotor, Hubsan_x4, stl, hubsan, R/C Vehicles,...
9
9.0
Jan 19, 2021
01/21
by
Rimvydas Pocius (hardas999)
data
eye 9
favorite 0
comment 0
Aluminum square tubing - 15mm Battery 2200mAh 3S Propeller - 1045 Motor - Emax XA2212 980KV ESC -Emax Simonk Series 30A Hobbyking KK2.1.5 Multi-rotor LCD Flight Control Board Weight ( without battery) - 730g PLA - infill 25%
Topics: thingiverse, Quadcopter, Quadcopter_Frame, Hobby, stl
9
9.0
Jan 12, 2021
01/21
by
Scott Williamson (ScottWilliamson)
data
eye 9
favorite 0
comment 0
This allows a FrSky XM+ to be mounted in a 20x20 mm stack. Print with TPU.
Topics: thingiverse, stl, Quadcopter, Vehicles, micro_quadcopter
3
3.0
May 1, 2021
05/21
by
Vincent Utama (vinegar)
data
eye 3
favorite 0
comment 0
This is a 3D printable quadrotor frame I created using Fusion 360 for an online seminar at Maranatha Christian University Indonesia. The model is designed to be printed in a printer with at least 220x220mm print area. I used Creality Ender 3 to print the models and they turned out quite good. Requires a lot of M3 nuts and bolts. This project is still in progress and I might make some improvements in the future. Frame weights about 230g. Drive system I used for the drone: Motor: Multistar Elite...
Topics: stl, 400mm_Quadcopter, drone, Quadcopter, Quadcopter_Frame, thingiverse, R/C Vehicles
6
6.0
Mar 2, 2021
03/21
by
Irman Hilmi (irmanhilmi)
data
eye 6
favorite 0
comment 0
Just simply a better quad skid. 2 sizes, one for Minis, the other for Micros. Print in TPU 90-100% infill, or PetG at 80% infill or similar EDITED 12 Aug : Added a V2 to the Mini sized skids, which makes it easier to screw on the M3 bolts when printed using PETG
Topics: mini_quadcopter, thingiverse, stl, drone, micro_quadcopter, R/C Vehicles, Quadcopter
10
10.0
Jan 13, 2021
01/21
by
Aleksandar Kolov (akolov)
data
eye 10
favorite 0
comment 0
Decided to do a remix from HexaCopter (HEX6) version for Mini Flame Wheel since I wanted to create a frame for Y4 or Y6 configuration. I'm using stacked arms and there is just enough space for the motor bolts. As I'm used to carbon fiber miniquad frames, this one seems a bit less sturdy, but it flies well enough.
Topics: R/C Vehicles, thingiverse, mini_quadcopter, stl, Quadcopter, hexacopter, Quadcopter_Frame
5
5.0
Apr 16, 2021
04/21
by
Tga Frame (tgaframe)
data
eye 5
favorite 0
comment 0
This is my new micro quadcopter frame prototype. TechyBee. FlexyBee's new little sister. I wanted to share with you before producing. Perhaps it will remain as prototype, i'm not sure. If you like it, print it and fly it. Some Technical Specs. Volume: 65 cm3 Size: 190mm wheelbase (motor to motor) Render equipments: 1806 size motor,4s 1300mah battery, 4" propeller, 200mw vtx, 25x25 fpv camera, Go pro3 camera. You need complete to this frame, M3 tap for screw holes and 4 pcs M3x10 screw....
Topics: Quadcopter, thingiverse, stl, micro_quadcopter, R/C Vehicles, microquad, Quadcopter_Frame
8
8.0
Jan 17, 2021
01/21
by
Pippo Pippis (Onlyforfun46)
data
eye 8
favorite 0
comment 0
Ciao y'all, The main purpose of this Quad is flying on FPV in my backyard (tiny and Narrow!). The idea is to contain as much as possible all the electronic inside of the frame for better protection and have a pleasant aesthetic. _____________________________________ VERSION V0: -->(everything fits in but tightly !) need some soldering / assembly skills :-) -->All thicknesses can be reduced to further contain the weght. Mini Quadcopter 130mm Diag motor to motor -Motors: TMotor F20 V2...
Topics: thingiverse, Quadcopter, Quadcopter_Frame, drone, mini_quadcopter, R/C Vehicles, stl
8
8.0
Jun 20, 2021
06/21
by
Abe (BoyDrone)
data
eye 8
favorite 0
comment 0
I thought of this variation from seeing a post on FB. I can't recall who posted it, but it was something more simple than this. I thought to make this adjustable to suit a bunch of different quadcopter sizes.The spacing for the wall screws lines up with 1" pegboard holes, so there will be a pegboard adapter to go with this. Thanks for liking and please share around!
Topics: thingiverse, Quadcopter_Frame, stl, Hobby, Quadcopter
