0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Uwe Social (USG)
data
eye 0
favorite 0
comment 0
Simple holder for an LED power supply mounted on the crossbar of my MicroCube. The cover is mandatory on the AC side. You can put the power cord through the tube. The holes are either 2.5mm (prepared for a thread) or 3.0mm (M3 screw). So check the sizes with the specific drill bit and tap the threads. Remark: Something went wrong in Thingiverse. This design was double stored under thing:5422012, I delete it.
Topics: stl, power_supply_cover, 3D Printer Parts, power_supply_mount, microcube, power_supply, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
None Given (timid_possum)
data
eye 0
favorite 0
comment 0
Replacement knob with knurl for grip.
Topics: stl, toaster oven, oven, dials, Kitchen & Dining, power, toaster, powerxl, power xl, air fryer,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Naim İşçi (Tods)
data
eye 0
favorite 0
comment 0
60x40 mm power supply without fan model Schuar... usefull for wall mount... you can use some paper or something soft to clamp the power supply...
Topics: stl, power_supply_cover, power fan, 3D Printer Accessories, thingiverse
1
1.0
Aug 8, 2022
08/22
Aug 8, 2022
by
The Searchers
audio
eye 1
favorite 0
comment 0
Tracklist: 1. Hearts In Her Eyes 2. Switchboard Susan 3. Feeling Fine 4. This Kind Of Love Affair 5. Lost In Your Eyes 6. It's Too Late 7. No Dancing 8. Coming From The Heart 9. Don't Hang On 10. Love's Gonna Be Strong
Topics: Rock, Pop Rock, Power Pop
Source: Vinyl LP
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Nathan Friend (nfriend)
data
eye 0
favorite 0
comment 0
A power star from Super Mario Galaxy. Designed to be printed in two halves to make it possible to print without supports. Print the star in gold (or yellow) and the eyes in black for the best effect! Both star halves include peg holes. The included pegs can be printed with the model and fitted into the holes to make it simple to perfectly align and glue the two halves together. **Important note:** Both the eyes and the pegs are fitted _exactly_ to their respective holes with no built-in...
Topics: stl, super_mario_galaxy, Props, super_mario_bros, star, Super_Mario, power_star, printer_friendly,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Justin Meyer (TXherald)
data
eye 0
favorite 0
comment 0
Continuing down the Superhero rabbit hole I decided it would be fun to try my hand at my favorite duo from Marvel Comics, Power Man & Iron Fist! Crafting superheroes has been a great distraction! I new present the Heroes for Hire, Power Man (Luke Cage) and Iron Fist (Danny Rand) for the Flatminis Continued Project. This prints supportless, quickly, and can be on the table with essentially zero cleanup once you have fitted it to the base. As a part of the Flatminis Continued project it is...
Topics: stl, marvel_comics, power_man, defenders, dannyrand, fighter, monk, iron_fist, lukecage,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
dif is (dif1s)
data
eye 0
favorite 0
comment 0
Type-C mod for nintendo DS Type-C I've used: https://aliexpress.ru/item/1005001337982060.html?spm=a2g2w.productlist.1.1.47f210b2k5XMvd&sku_id=12000015740849227 May also work with Game Boy Advance SP.
Topics: nintendo, stl, nintendo_ds, power, Electronics, mod, gameboy_advance_sp, USB_Type_C, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Denys (DenKu)
data
eye 0
favorite 0
comment 0
At first, there was an idea to create a DIY portable solar panel (Used 4 solar panels and controller bought from AliExpress) When this part was complete decided to add rotating platform using 28BYJ-48 5V stepper motor and arduino UNO It rotates in the side with higher brightness if difference is enough To avoid 360 rotating placed two buttons which are end stops for rotating in each direction The project itself isn`t very useful and like an educational one It was interesting to develop such...
Topics: Arduino_Uno, stl, stepper_motor, fusion_360, solar, stepper_motor_mount, fusion360, ABS,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Denys (DenKu)
data
eye 0
favorite 0
comment 0
At first, there was an idea to create a DIY portable solar panel (Used 4 solar panels and controller bought from AliExpress) When this part was complete decided to add rotating platform using 28BYJ-48 5V stepper motor and arduino UNO It rotates in the side with higher brightness if difference is enough To avoid 360 rotating placed two buttons which are end stops for rotating in each direction The project itself isn`t very useful and like an educational one It was interesting to develop such...
Topics: Arduino_Uno, stl, stepper_motor, f3d, fusion_360, solar, stepper_motor_mount, fusion360, ABS,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Sergey Multisoft (Multisoft)
data
eye 0
favorite 0
comment 0
Case for NOYITO 8A 4 USB Charger Power Supply Module DC 12V 24V 8-35V Buck to DC 5V 2A 4-Port USB for Car Charger Module 5V Device
Topics: stl, 4x USB Module, Charger Power Supply, Electronics, 8A 4-Port USB, NOYITO 8A, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Kristoffer Sørensen (Kiksemand2)
data
eye 0
favorite 0
comment 0
**Box for housing LM2596 DC-DC Buck Converter Step Down Adjustable Power Supply Module.** Featuring: - **Cooling**: Grills allow *passive cooling*. The file named "Box for LM2596 with hole for heatsink" has a square hole for a 15x15 mm. *heatsink*. Use thermal paste or a thermal pad. - **Easy mounting and assembling**: The box can be *mounted on any flat surface*. For *toolless* mounting apply double adhesive tape on the lid and the box can be clicked onto the lid. If you prefer using...
Topics: module, stl, toolless, Adjustable, LED_Power_Supply, Electronics, on_off, buck, heatsink, LED,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Pascal (Satellietje)
data
eye 0
favorite 0
comment 0
Good antennas are expensive. This it will cost you around 15 euros and works super. I use it at 86 - 87 MHz as a transmission antenna with 50 Watt Power. It has an excellent SWR ratio Print with PETG-30% Infill or ASA/ABS Shopping list: 130 grams of filament Bnc male chassis part 1 copper pipe 12mm 2 meters 6 m3 screws 1 Tyrap 250 x 3mm glue If you use it outdoor then u need self -vulcanizing tape Dipole Antenna Calculator...
Topics: transmitter, stl, radio, dipool, ham, power, Electronics, antenna, dipole, 3 meter, thingiverse,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
image
eye 0
favorite 0
comment 0
Intake and Discharge Water Temperatures Diablo Canyon Source: https://ia902202.us.archive.org/13/items/nes-tr-020-diablo-canyon-v-8-final-1/NES-TR-020%20Diablo%20Canyon%20v8%20%28final%29%20%281%29.pdf
Topics: cooling water, nuclear power, nuclear energy, brine water
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
james gunn (gunny92)
data
eye 0
favorite 0
comment 0
Remix of Power Supply Mount ATX by Angorashi with extra screw holes to allow for different orientation of the psu
Topics: ATX_mount, stl, ATX_PSU, psu, Electronics, ATX_Power_Supply, thingiverse
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Tuleev, Aman (Aman-Gelʹdy Moldagazyevich)
texts
eye 0
favorite 0
comment 0
319 pages : 20 cm
Topics: Power (Social sciences), Control (Psychology), Coalitions, Pouvoir (Sciences sociales), Contrôle...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
None Given (timid_possum)
data
eye 0
favorite 0
comment 0
This is a simple overlay for a PowerXL Air Fryer Oven and Grill. This includes a single sheet containing the Temperature, Function, and Timer dials with their markings as well as individual sheets for each. There is also a round design for the timer included. I took some black acrylic paint and brushed it over the lettering to make it readable.
Topics: stl, label, function, power xl oven, oven, dials, Kitchen & Dining, timer, power xl air fryer,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
ntfs hard (ntfshard)
data
eye 0
favorite 0
comment 0
Yet another switch box with power connector. Difference: power connector from dead ATX PSU (other models has big one with fuse) Full external sizes: 67x60mm Mounting holes: M3 Switch diameter: 15mm (3A/250V should be enough I guess, if we could trust the cheap switch) Walls thick about 2mm I printed without supports, but for more result guarantee please use it =) Files: 4th revision, photos: 2nd revision
Topics: stl, power_switch, DIY, power_box, power_connector, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Enzo Moscoso (Enzo_M)
data
eye 0
favorite 0
comment 0
Mounting bracket for the Rad Power Headlight (Standard or Premium) to mount to the front rack. Allows for more clearance between the light and the front wheel/fender. It doesn't bounce around like the included bracket, and the tilt range is much better.
Topics: M5_screw, stl, front_fork, mounting_bracket, RadPowerBikes, front, radpower_bike, M5_spacer,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Peter Duan (lucycore)
data
eye 0
favorite 0
comment 0
This is a dummy AA battery, which I created when designing LEGO ev3 curtains. It allows us to use wires instead of batteries to supply power without damaging the battery compartment.
Topics: stl, wire_holder, battery, AA_Battery, power_supply, Tools, thingiverse
84 p., illus., 27.4 cm, trade catalog
Topics: tool catalog, siding tools, HVAC tools, tubing tools, drywall tools, sheet metal tools, wrenches,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
UNECE
image
eye 0
favorite 0
comment 0
Life Cycle Assessment by the UNECE Source: https://web.archive.org/web/20220815210421/https://unece.org/sites/default/files/2022-04/LCA_3_FINAL%20March%202022.pdf
Topics: lca, unece, nuclear power, clean energy, green energy, nuclear energy, greenhouse gas emissions,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Martin Chou (AeroMartin1)
data
eye 0
favorite 0
comment 0
Squirrels are cute, but could be very annoying in the garden. I have tried several different repellents on the market. This combo works best. I have two sets of this running for two months now. Only one squirrel challenged it once at the beginning. All squirrels have since stayed away from our garden. We are happy. :-) BOM: (No affiliation) - Angveirt Ultrasonic Rodent Repellent for Car: https://www.amazon.com/dp/B07KWQCNWS (Note, this is the 12v model. I tried their battery operated 6v model....
Topics: stl, repellent, war_on_squirrels, Squirrels, solar, squirrel_deterrent, TinkerCAD, Outdoor &...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
William StPierre (Willyz99)
data
eye 0
favorite 0
comment 0
wire wheel holder for power fist 10PC set #8505851
Topics: stl, holder, Wire_brush, power_fist, Tool Holders & Boxes, thingiverse, wire_wheel
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Jonathan Pepper (xPluto)
data
eye 0
favorite 0
comment 0
I designed and built a solar-assisted remote-controlled catamaran that has 3D printed hulls. Watch the start-to-finish build video for detailed instructions: https://youtu.be/2nNeEw7WN78 Tip me if you're feeling generous :) ________________________________________________________________ Parts, raw materials, and hardware is listed below: Batteries: https://www.amazon.ca/gp/product/B0716XTT6N/ Battery charger: https://www.amazon.ca/gp/product/B08FXYQMVT/ RC Transmitter and receiver:...
Topics: Solar Power, stl, Brushless DC Motor, Genasun, RC Catamaran, R/C Vehicles, Solar Panel,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
JD Bergan (JDBergan)
data
eye 0
favorite 0
comment 0
Print in regular TPU For best softness print in NinjaFlex or VarioShore TPU 0.8mm or 1mm nozzle 1 wall 20% infill Print each piece separately
Topics: stl, Sport & Outdoors, inmotion, inmotion_v12, v12, Power_Pads, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
(ACDanyC82)
data
eye 0
favorite 0
comment 0
This camera mount is for both Insta360 Go 2 and Caddy Peanut. If you buy this charging connector, made for Caddx Peanut, "C0PJ-HS003 Charging Connector", you can recharge camera during flight. I posted an image with the connections for recharge camera at 5V 2A from Zeus F722 flight controller. Thanks to HGLRC support team. I make this mount because I have lost and found Go 2 camera two time after some crash. I make it also because I need to recharge Go 2 during flight. I use infill at...
Topics: stl, dji_airunit, case, dji_air_unit, insta360_go2, 5V_2A_power_supply, bec, fpv_camera_mount,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Apple Inc.
software
eye 0
favorite 0
comment 0
Panther's system requirements are: PowerPC G3 , G4 , or G5 processor (at least 233 MHz ) Built-in USB At least 128 MB of RAM (256 MB recommended, minimum of 96 MB supported unofficially) At least 1.5 GB of available hard disk space CD drive Internet access requires a compatible service provider; iDisk requires a .Mac account Video conferencing requires: 333 MHz or faster PowerPC G3, G4, or G5 processor Broadband internet access (100 kbit/s or faster) Compatible FireWire DV camera or...
Topics: Apple, Mac, Mac OS X, Power PC, PowerBook, Power Mac, iBook, Software, eMac
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Austin Carlson (3D_Concepts_Utah)
data
eye 0
favorite 0
comment 0
I wanted a beefy 40v Ryobi mount plate to use for small EV's like my MX500 Razor build. The ones I had printed previously fell apart when I went off road so I designed a beefy and acurate one of my own. It uses battery crimp terminals like this: (search for) female terminal 926965-1 I'm doing mine in TPU so they cannot be broken under any circumstances. You can print it in one piece or two so you can use a hard material for the electrical contact part and TPU for the main body which is what I'm...
Topics: stl, POWER WHEEL, CONNECTOR, RYOBI, ADAPTER, DIY, MOUNT PLATE, thingiverse, 40V, ROBOTICS
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Mr. Glenor (neksport)
data
eye 0
favorite 0
comment 0
This is a power supply cover for silent fanless power util for Creality Ender 3d. Compatible with Sopudar SPD-240V. Power cable hidden at the back side and power button still easy to switch on/off. Because of the Z-shape it became possible to put AC about 4cm lower from original position.
Topics: stl, power_supply_cover, creality_ender_3, 3D Printer Accessories, thingiverse
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Williams, Linda L., 1953-
texts
eye 0
favorite 0
comment 0
xiv, 149 p. ; 24 cm
Topics: Nietzsche, Friedrich Wilhelm, 1844-1900, Power (Philosophy)
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Roger Rabbit (RoOg)
data
eye 0
favorite 0
comment 0
I remixed the box to fit usb fast charge ports and quick connect on the side, removed fan grill and added holes in the lid instead as the voltage regulator already got one on his back
Topics: diy, DIY_electronics, power_supply, stl, Electronics, thingiverse, workbench, Wz3605e
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Richard Downey (tekjock)
data
eye 0
favorite 0
comment 0
Was looking for something simple to mount some LEDs to for the Green Lantern Battery. I took the existing lenses and then made them thicker and a smaller area even thicker with holes for the LEDs and quite happy with the results.
Topics: Green Lantern Battery, LED, Power Battery, Green Lantern, stl, Props, thingiverse, led_mount,...
0
0.0
Aug 11, 2022
08/22
Aug 11, 2022
by
Mitchell, John V
texts
eye 0
favorite 0
comment 0
xvii, 196 pages : 21 cm
Topics: Petroleum industry and trade -- Political aspects, Petroleum industry and trade -- Economic...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Eric Belanger (bele2009)
data
eye 0
favorite 0
comment 0
I could not find a sturdy mount for an ATX Power Supply used outside a computer case (Virtual Pinball cabinet) so I built my own.
Topics: stl, ATX_Power_Supply, thingiverse, DIY
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Derik Whittaker (derikwhittaker)
data
eye 0
favorite 0
comment 0
Vertical Mount for Falcon F8 Power Distro Controller There are 4 holes on the board that line up w/ the Controller. Use M2 bolts to secure the controller to the board. There are 2 mount holes on the bottom that are used to secure the mount to a mounting plate.
Topics: xlights, controller, enclosure, pixels, psu, stl, falcon, Electronics, thingiverse, psu_mount,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
STACH filho (marfando)
data
eye 0
favorite 0
comment 0
It's a cable holder for power supply cable. I did it in Petg but it should work with other material, i used a double sided tape to fix it.
Topics: stl, power_supply_holder, thingiverse, Computer
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Piskunov Sergey (psv6)
data
eye 0
favorite 0
comment 0
How to use an impeller with a radial flow direction in a wind power generator? To do this, you need to install a concentrator duct. I applied this in "Turbo R". The use of a concentrator, as shown by theoretical and experimental studies of various authors, allows you to slightly increase the flow rate and reduce the size of the propeller. For "one-piece" parts, downsizing is advantageous because most popular 3D printers have a small print area. By the way, with the usual...
Topics: wind turbine, concentrator duct, Engineering, wind power generator, stl, generator, wind,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Peter Silie (Zipobibsi)
data
eye 0
favorite 0
comment 0
Realy liked the power rail but haven't had the right Switch. Switch is 5mm in diameter. watch out for your specifications, my switch is only made for 3A!
Topics: power_switch, stl, wago, Electronics, thingiverse, switch
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Marcel W. (MarcelMMZ)
data
eye 0
favorite 0
comment 0
ONLY for Class II TV‘s (without Ground, check for the Class II symbol on your TV‘s nameplate, picture below). I own 2 LG Oled TV's which are both mounted on the wall. For some odd reason, both have a cord attached to a plate (with included strain relief) and then it goes to an internal plug on the main PCB. Since there is more than enough room for an C8 (figure 8) inlet/socket to go, I decided to design a replacement plate to hold a C8 inlet and upgrade the TV. Now my LG Oled's have a...
Topics: Televison, Power_inlet, television, oled, power_supply, stl, inlet, thingiverse, LG OLED,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Rosenfeld Johan (Joh76)
data
eye 0
favorite 0
comment 0
These are the Lego Mindstorms Advanced Power Base rails for slot car racing of the flat slot car that I made to accompany my 1/32 slot cars. I'm going to make hairpin turns and let set them up later, so keep an eye on them. Lego Mindstorms Advanced Power Base timing rails for slot car racing uses necessary Lego parts to work correctly: https://www.bricklink.com/v2/catalog/catalogitem.page?P=883a https://www.bricklink.com/v2/catalog/catalogitem.page?P=5306bc046#T=C&C=11...
Topics: slot_car, Lego_Mindstorms, Slotcar, slot_car_track, Hobby, stl, advanced_power_base, thingiverse,...
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Prentice-Hall of Canada
texts
eye 0
favorite 0
comment 0
126 p. : 28 cm
Topic: Power tools
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
暮光小猿wzt kuresaru (kuresaru)
data
eye 0
favorite 0
comment 0
Used in 2WD car. Use transparent PETG fliament to print it.
Topics: power, stl, Tp4056, thingiverse, Electronics
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Stefan Stridh (chipen83)
data
eye 0
favorite 0
comment 0
My spacer for the off power steering had broken so I needed to make a new one. Use together with a suitable stainless steel washer on the outside. If you like what I'm doing, please consider supporting me https://www.buymeacoffee.com/taguvove
Topics: off power steering, Seadoo, stl, power steering, thingiverse, Sea-Doo, Automotive, seadoo_rxp, sea...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Moritz Nönö (Anony-Mou)
data
eye 0
favorite 0
comment 0
Habe den Lüfter am Netzteil ausgetauscht, damit er sehr viel leiser wird. Das ist mein verwendeter Lüfter, es geht aber auch jeder andere Lüfter mit 92x92x14 mm. https://www.amazon.de/gp/product/B009NQM7V2/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1 Aufgrund der Größe musste ich ihn allerdings von außen montieren, was keinerlei Probleme beim Drucken verursacht hat. Auch lief der ursprüngliche Lüfter mit 24V der Noctua aber nur mit 12V deswegen muss man folgendes Teil noch...
Topics: housing, Anycubic, Lü, fter, anycubic mega se, Gehä, use, stl, 3D Printer Parts,...
0
0.0
Aug 8, 2022
08/22
Aug 8, 2022
by
Malone, Patrick M
texts
eye 0
favorite 0
comment 0
xii, 254 p. : 22 cm
Topics: Water-power -- Massachusetts -- Lowell -- History -- 19th century, Hydraulic engineering --...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Stephan (Joghurt)
data
eye 0
favorite 0
comment 0
The power button of my Pard NV007S is really easy to operate, sometimes switching on my Pard while still in its protective pouch, which I naturally don't notice and therefore everytime I take it out I have to switch it on to check the battery. That's pretty annoying so I designed this button guard. I cut off three strips of a "Tesa Power-Strip" and used them to put it onto my Pard.
Topics: Sport & Outdoors, powerbuttoncover, NV007S, powerbutton, Pard, 007, 007S, powerbuttonguard,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Andres Bist (andresbist)
data
eye 0
favorite 0
comment 0
Este es un botón para el encendido y apagado de la PC, fácil de imprimir y de armar Necesario: Llave palanca simple pulsador 1 tornillo M3x15 2 tornillos M3x12 3 tuercas M3 Y un poco de cable (Reciclado mejor) La instalación es relativamente fácil, conecte las puntas del cable a las terminales 2 y 3, a continuación extienda la linea de cable lo que necesite hasta llegar al botón de encendido de su computadora Única pieza con soporte El Cuerpo, seria la parte 2 en las alas que se...
Topics: button, emergency, Computer, flying, power_button, power_switch, stl, thingiverse, switch, computer
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
International Journal of Electrical and Computer Engineering (IJECE)
texts
eye 0
favorite 0
comment 0
RF power amplifiers are one of challenging blocks in designing radio frequency transceivers, this is due to non-linearity behavior of power amplifiers that leads to inter-modulation distortion. This paper presents the design of wide-band power amplifier which combined with parallel coupled line band pass filter at the input and output of power amplifier to allow the only required frequency band to pass through the power amplifier. Class-A topology and ATF-511P8 transistor are used in this...
Topics: Inter-modulation distortion, Power amplifier, Wide-band
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
International Journal of Electrical and Computer Engineering (IJECE)
texts
eye 0
favorite 0
comment 0
The conventional method of a single phase induction motor windings design usually constructed the main and auxiliary windings in both slot. So, there was a complicated winding design if that compare to the three-phase induction motor. Because of that, this study was aimed to design a new windings design of a single phase induction motor that construction like a three-phase induction motor. This study was focused to design a 24 slot capacitor-start capacitor-run induction motor. The windings in...
Topics: Input current, Power factor, Single-phase induction motor, Three-phase induction motor, Windings...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Der Onkel (HeavyMetalGuy)
data
eye 0
favorite 0
comment 0
Single and double wallmounts or Elegoo PSUs. Including a plug to cover or dim (depending on the material you use) that pretty bright blue led.
Topics: Elegoo_Mars_2_Pro, 3D Printer Accessories, Elegoo_Mars, power_supply, PSU_Mount, stl, thingiverse,...
