0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Jo-Einar Emblemsvag (Flyger)
data
eye 0
favorite 0
comment 0
This is the 2nd iteration of a 3D printable toy glider that can be launched by hand or more reliably with a 3D printed rubber band shooter. Demo video: https://youtu.be/3ou4tPLpRGk Changes for v2: The cockpit and nose parts are resized for double wall printing for robustness. For extra crash resistance the nose can also be printed with flex material. The plane should be launched flat or with a slightly downwards trajectory, ideally from some height. If more weight is added to the nose, by...
Topics: rubberband, Sport & Outdoors, freeflight, flying_wing, flying, airplane, stl, glider,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
William Walker (BassBloke)
data
eye 0
favorite 0
comment 0
This is a basic Thrust Tube kit to turn your Lidl glider into an EDF jet. Fitting instructions are included. This kit is designed only for the FMS 50mm 11 blade 3s 5,400 kV 358W EDF unit. Print the plates and mount with 100% infil. Print the Thrust Tube with 0 top/bottom layers, 2 walls and 0% infill.
Topics: stl, EDF, thingiverse, Lidl_Glider, R/C Vehicles
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Matthias Auracher (matthias69)
data
eye 0
favorite 0
comment 0
edf turbine lidl segelflieger
Topics: Turbiene, stl, EDF, thingiverse, segelflugzeug, Lidl_Glider, Hobby, lidl, Lidl_Gleiter_Umbau
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Alexandr P. (ALEX77NEW)
data
eye 0
favorite 0
comment 0
I present a model of a glider toy for alteration with engines. Control using different thrust engines, radio control equipment FlySky i6. The photo shows how to mix channels CH1, CH3, CH4. Channel CH4, in this case, in the DUAL RATE tab is set to zero - RATE 0, this channel CH4 should not interfere with the control of the model. DUAL RATE of the first channel CH1 set RATE 60, EXP minus 20. For a quiet flight, it is better to use a 16X7 engine, with a 45mm propeller and a light battery. For...
Topics: Toy & Game Accessories, stl, thingiverse, toy glider, engine frame, glider radio control
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Burndown Media (Burndown)
data
eye 0
favorite 0
comment 0
One piece, print in place indoor glider that prints in roughly 30 minutes. Once complete, carefully remove from bed, and give it a throw! If the glider dives down, gently bend the back of the smaller wings in at the back up a little bit, and it should fly nicely.
Topics: wing, aircraft, glide, airplane, cessna, stl, glider, plane, thingiverse, jet, stabilizer,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Nick Orsi (AKNick)
data
eye 0
favorite 0
comment 0
Created this piece to use with the provided wing connectors that come with the JOY 2.5m F5J RC Glider. Using this, you can plug the wings into the fuselage. You'll need to cut a 11.7x8.4mm hole 2mm behind the spar. Here is the build thread on RC Groups: https://www.rcgroups.com/forums/showthread.php?4138605-JOY-F5J-2-5m/page4
Topics: F5J, rc_glider, stl, thingiverse, R/C Vehicles
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Philippe van den Broeck (Phillus)
data
eye 0
favorite 0
comment 0
Pour emporter vos planeurs (LIDL ou autres) sur le dos d'un TUNDRA. Prévoir du tube (ou jonc) carbone de 4 mm et 3 mm ainsi que quelques élastiques. Aucune particularité pour l'impression des pièces en PLA. Bons vols à tous.....
Topics: stl, thingiverse, Tundra, Lidl_Glider, R/C Vehicles
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Jan Spatny (JanSpatny)
data
eye 0
favorite 0
comment 0
Hlepful for rubber bungee / tow line launched RC Gliders: Spool with removable handle (for easy storage - handle just slides in / out) and electric screwdriver adapter for swift tow line winding on an airfield. I used: *Gembird filament spool *2x 16x8x5mm ball bearings (replaceable by prindet tube or something, I used ballbearings just because they were on a table) *M6x120mm screw + M6 nut * 4x servo screw (to keep the middle part in the spool) * Blue loctite to secure the nut on the M6x120mm *...
Topics: rc glider, F3L, stl, winch, thingiverse, res, R/C Vehicles
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Marko Roolaid (Roolaid)
data
eye 0
favorite 0
comment 0
Tutorial video https://youtu.be/XsCBAcILIh0
Topics: carbon, laser, 3D_printing, RC_airplane, roolaid, rc_glider, DLG, airplane, RC_plane, stl, glider,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
(sqwad_fail)
data
eye 0
favorite 0
comment 0
This is an attempt at a 3D Printed glider. The glider achieves anywhere from a 2:1 to 4:1 glide ratio, or for every 1 unit off the ground the glider will travel 2-4 units. It has been optimized around PLA but materials like LWPLA will increase capability PLEASE READ THE PRINT SETTINGS AND POST PRINTING This glider functions off of its mass minimization. This requires specific print settings This also makes it brittle and requires some light post print processing.
Topics: Model_aircraft, DesignProject, hand_launch, aircraft, Hobby, airplane, stl, glider, aerospace,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Mathiyazhagan R J (mathirj)
data
eye 0
favorite 0
comment 0
You can make the flying glider from assembling the parts.
Topics: Glider, Construction Toys, aeroplane, stl, thingiverse, sailplane
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Pavel Fedotov (pashaF)
data
eye 0
favorite 0
comment 0
I bring to your attention a folding propeller. Based on a good propeller https://www.thingiverse.com/thing:3325659. After manufacturing, I measured the thrust and current consumption of the motor on a makeshift stand. Later, I became interested in trying the same blades but in the amount of three pieces. I made a hub for them with 3 blades, it is almost the same size, maybe one or two mm more. Central hole with a diameter of 5 mm. Information about the results of measurements can be found in...
Topics: rc plane, propeller, airplane, stl, glider, thingiverse, SLA, R/C Vehicles
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Adam Rypinski (arypinski)
data
eye 0
favorite 0
comment 0
Very simple glider that can be printed all at once. I was having trouble finding one that could be printed all at once, so I designed this one. Still a WIP as I need to do some test flights and there may be some revision. I recommend low percentage of in-fill to keep it light. You probably need to rotate it a bit to fit it on the platform.
Topics: airplane, stl, glider, thingiverse, Vehicles
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Klaus Eich (Kleich)
data
eye 0
favorite 0
comment 0
For e.g. model gliders: installing of servos in the wings including servoframes using adhesive methods with e.g. 2 component adhesives needs to keep the servos in place as long the adhesive is still not hard. This is a tool which keeps the servos in place. Sometimes you need 4 or more those tools at a time so I made it as cheep as possible with printed threads. It is easy to print: no supports, you can use PLA or PETG or ABS+ Layer height is 0.2 mm printing time:
Topics: Servo_Mount, Tools, F5J, rc_glider, stl, thingiverse, servoframe, fully_printable, f3j, servo
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Silas Heldt (Her0_1337)
data
eye 0
favorite 0
comment 0
My first selfcreated 3D object ever! Not pretty but it works ;) Its a replacement part for my swingchairs because 3 of them were delivered defect and they can't send me only the chair foots without sending back the whole chair. Also I can't find correct ones in the Internet. For that reason I bought a 3D printer and printed them myself. Maybe it helps someone else in the future.
Topics: freischwinger, swing, foot, part, spareparts, stl, glider, Schwingstuhl, thingiverse, Replacement...
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Chris RI (RI3D)
data
eye 0
favorite 0
comment 0
simple Glider ,easy ti print . Paint it like you want .Simple designed,simple to print. Please support me, If you want to Donate me,and my Desings, please under Paypal @ c.richter386@gmail.com thanks,and enjoy
Topics: Games, airplane, stl, glider, thingiverse, toys
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Chris RI (RI3D)
data
eye 0
favorite 0
comment 0
easy to print
Topics: Toys & Games, airplane, stl, glider, thingiverse
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Martin Brown (Martin128)
data
eye 0
favorite 0
comment 0
This is a replacement canopy for the Hobby King 950mm discuss launch glider.
Topics: rc_glider, DLG, stl, glider, thingiverse, R/C Vehicles, hobbyking
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
alexander dean (WSKYTNGO)
data
eye 0
favorite 0
comment 0
This is a small airplane frame that requires soapy water (Bubbles) to create an airfoil and glide. after the print, fold up the tail into 'Vertical stabilizers'. then make a mixture of dish soap and water, pour in on a dinner plate and dip the entire plane into the water and watch the bubbles form. It takes some practice to get it to fly right, but definitely a mind boggling little project. have fun. I made this out of PLA+ and it only takes about 13 minutes.
Topics: quick_print, Toys & Games, bubbles, airplane, stl, glider, thingiverse
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Jo-Einar Emblemsvag (Flyger)
data
eye 0
favorite 0
comment 0
Included here, for free, is the wings and the bonus balance weight of the Dragonfly indoor glider. If you like the design, the rest of the files for the rubberband launch gun and the dragonfly style body can be bought here: https://cults3d.com/en/3d-model/gadget/dragonfly-indoor-glider Dragonfly_wing.stl: - PLA or PLA+ (for required stiffness) - Print in vase/spiral mode with maximum 0.1mm layer height, and no bottom or top layers. Ca. 30 mins - CURA: Leave wing at default 45 degrees to the...
Topics: gun, rubberband, indoor, Rubberband_gun, rubberband_slingshot, Mechanical Toys, dragonfly,...
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
pierpaolo pastorino (FreeFlight)
data
eye 0
favorite 0
comment 0
This is my last project for a 3D printed rc glider. It s designed to use PLA-LW only, but you can print with standard PLA (if you prefer to fly with a brick). I finished building but not yet maidened due to our slope still closed for swine fever, due to high request I upload the files of the complete project before maiden so... Carbon fiber bars are expensive for me so I used wood for spars, nevertheless you can use carbon fiber. I'm not making business with Rc, this project is for free but...
Topics: Glider, rc glider, Rc plane, stl, thingiverse, Other
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Forrest Lim (inafoxhole)
data
eye 0
favorite 0
comment 0
Rough guesstimation of DARPA's HTV-2 (Hypersonic Technology Vehicle) glide vehicle aeroshell geometry, based on publicly available wind tunnel data and demonstration videos. Full scale, 12' in length
Topics: missile, HTV2, aircraft, stl, glider, thingiverse, hypersonic, Vehicles, spacecraft
To survive, you're going to need more than just a knife! Source: https://www.youtube.com/watch?v=X0c7P-GI0CU Uploader: VG247.com
Topics: Youtube, video, Gaming, Far Cry 3, New Trailer, Hang Glider, Ubisoft, Far Cry, Trailer
92
92
Jun 21, 2022
06/22
Jun 21, 2022
by
MeruP
software
eye 92
favorite 1
comment 0
Aoi returned to his hometown of Kazegaura where a gentle breeze blows through the streets, having lost his direction in life. On the hill lined with windmills, he met a wheelchair-ridden girl Kotori and watched the gliders overhead in awe. With his childhood friend Ageha in tow, they resurrect the soaring club in order to fulfill a childhood dream: to fly on a glider.
Topics: R18, Visual Novel, Eroge, Pulltop, MeruP, Comedy, Romance, Slice of Life Drama, ADV, Summer,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Hubertus Volkmer (JoHuVo)
data
eye 1
favorite 0
comment 0
Druckprofil Standard PETG Das ist für den Umbau auf 1840mm Spannweite vom Gleiter, den ich beim Lidl gekauft habe. https://youtu.be/MVIxFdtg9l8 https://youtu.be/1tfTTIbqp8o
Topics: stl, Lidl_Glider, 3D Printing, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Chris Bovee (chrismofer)
data
eye 1
favorite 0
comment 0
Here's a printable center-wing-panel for the UMX Whipit by Horizon Hobby It has a crease down the center so that it can be easily bent to follow the wing dihedral. I printed mine on a Prusa textured bed which lends a similar looking texture to the surrounding foam. Use only foam-safe CA glue, Epoxy, or other foam-safe adhesive such as gorilla glue. from Horizon this comes as part of the wing EFLU3102
Topics: DLG, thingiverse, Eflite, radian, hand launch, glider, horizon hobby, UMX Whipit DLG, R/C Vehicles,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Matthew Ph (beer2bolts)
data
eye 1
favorite 0
comment 0
*At last: Success!* I finally got a 3D-printed Ekranoplan glider to self-stabilize in the ground-effect. Very satisfying to let fly! - Beware: the nose is weak! You may wish to print spare nose screws. - Bowl it forward by pushing on the tail. -- "About as fast as someone running." I made a group for Ekranoplan Makers: https://www.thingiverse.com/groups/ekranoplan-makers
Topics: GEV, thingiverse, RC_airplane, wing_in_ground, ground_effect_vehicle, airplane, glider,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Joshua Marshall (Mrj666)
data
eye 1
favorite 0
comment 0
This is a tow release for the FMS Fox 2300mm V2 glider. It is shaped to fit into front cooling vent, and includes a channel to allow air to continue to flow through the vent. To complete the tow release you will need: - 9g Servo - such as HXT900 or HS55 - A short length of push rod wire, about 1mm diameter
Topics: RC_plane, thingiverse, glider, R/C Vehicles, stl
3
3.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Marko Roolaid (Roolaid)
data
eye 3
favorite 0
comment 0
All info in video!!! https://youtu.be/goCgRIHl9Bc
Topics: diy, plane, RC_planes, construction_toys, R/C Vehicles, flying, model, stl, bungee, motorcycle,...
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Saurabh Jambotkar (sj625)
data
eye 2
favorite 0
comment 0
This is a glider that can glide once you throw it. Bend the elevator slightly to tune the attitude of the glider.
Topics: throw, thingiverse, airplane, glider, plane, aeroplane, stl, DIY
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Anuar Nakyssov (Anik)
data
eye 2
favorite 0
comment 0
You can use these to fix the battery strap above the wheel hole. V1 is higher, V2 is lower.
Topics: asw28v2, thingiverse, asw28, 3D Printing, glider battery, volantex, stl
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
damien Pougheon (Beathedrummer)
data
eye 2
favorite 0
comment 0
Small hook I made for my kid glider in order to launch with a rubber band Just cut a groove in the glider belly in front of the wing LE, insert the hook in position (hook body must be flushed with the glider), glue with CA. find a rubber launcher to print (ie https://www.thingiverse.com/thing:28218). enjoy crazy loops !
Topics: thingiverse, Lidl_Glider, foam, Toy & Game Accessories, glider, Freefly, stl
3
3.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Matthew Ph (beer2bolts)
data
eye 3
favorite 0
comment 0
Alright, I think I'm finished with these designs, I'm happy enough. https://youtu.be/YXlcG7yUDo8 Ekranoplan Glider MKII ================== - I totally overhauled the airfoil design and principle. What's featured here is a progressive angle-of-attack wing shape. - The underside of the airfoil was removed because, theoretically, it shouldn't matter as much for an Ekranoplan. - The nose now features a screw for more accurate positioning of the nose weight. Brand New Tail! ============= - I'm...
Topics: rc_plane, thingiverse, skimmer, wing_in_ground, glider, plane, ground_effect, toys, stl,...
1 online resource
Topics: Sugar glider -- Juvenile literature, Marsupials -- Juvenile literature, Nocturnal animals --...
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Matthew Ph (beer2bolts)
data
eye 2
favorite 0
comment 0
Biplane version of my wing-in-tension concept for small airfoils. Spica airfoils all. Enjoy. - Cut acetate strips to 130mm (+0/-1) and 79mm (+0/-1) respectively to slip into the wing frames and plane body. - The front hole is for assembly & weighting. - Print patterns for the fuselage will affect it's strength and stiffness. - I recommend printing with a "lines" infill pattern with the model rotated at a 45 degree angle in the plane of the print bed. - If you mate the centre body...
Topics: biplane, rc_plane, thingiverse, airplane, glider, plane, rc_biplane, stl, Mechanical Toys
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Nick Gilbert (CirrusC2)
data
eye 1
favorite 0
comment 0
A simple ozflarm / swiss flarm adapter to allow mounting into an 80mm instrument panel hole
Topics: ozflarm, thingiverse, gliding, glider, stl, flarm, Sport & Outdoors
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Matthew Ph (beer2bolts)
data
eye 2
favorite 0
comment 0
Ok, I said I was done before, but this feels much more done now. I twinned up the body and put a straight section in between. I thought this would give more room for payload (powerups) and be a more stable craft. Demo flights: https://youtu.be/UBUVU6smMz0
Topics: thingiverse, ground effect vehicle, airplane, glider, plane, wing in ground, ground_effect, stl,...
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Marko Roolaid (Roolaid)
data
eye 2
favorite 0
comment 0
All info in video!!! https://youtu.be/goCgRIHl9Bc
Topics: balsa_plane, diy, gliders, PLA, R/C Vehicles, stl, motorcycle, RC_plane, RC_airplane, drone_racing,...
10
10.0
Apr 16, 2022
04/22
Apr 16, 2022
by
Jessica McGregor
movies
eye 10
favorite 0
comment 0
Antagonistic interactions between black rats and native Australian gliders
Topic: glider rat interaction
11
11
Mar 21, 2022
03/22
Mar 21, 2022
by
Smith, Claude
texts
eye 11
favorite 2
comment 0
184 p. : 25 cm
Topics: Great Britain. Army. Glider Pilot Regiment -- History, World War, 1939-1945 -- Aerial operations,...
9
9.0
Mar 21, 2022
03/22
Mar 21, 2022
by
© 2022 Walker Webb Watson 1951
movies
eye 9
favorite 0
comment 0
Short video of a hang glider I saw while riding my electric bicycle along the Pacific seashore by Canyons Beach access in Lincoln City, OR
Topics: hang glider, lincoln city, oregon, canyons
4
4.0
Mar 11, 2022
03/22
Mar 11, 2022
by
Fogel, Gary, 1968-
texts
eye 4
favorite 2
comment 0
127 pages : 24 cm
Topics: Torrey Pines Gliderport (La Jolla, Calif.) -- History -- Pictorial works, Gliders (Aeronautics) --...
Wills Wing Falcon 140, 170, 197, 225 Owner/Service Manual September 1998 - Fifth Edition
Topics: wills wing, hang glider
2
2.0
Mar 2, 2022
03/22
Mar 2, 2022
web
eye 2
favorite 0
comment 0
Le Fish Open Source Aerobatics Glider Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Le Fish Open Source Aerobatics Glider Wiki, lefishfandomcom
1
1.0
Feb 27, 2022
02/22
Feb 27, 2022
web
eye 1
favorite 0
comment 0
Project Sugar Glider Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Project Sugar Glider Wiki, project_sugar_gliderfandomcom
3
3.0
Feb 20, 2022
02/22
Feb 20, 2022
web
eye 3
favorite 0
comment 0
Glider GPS Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Glider GPS Wiki, glidergpsfandomcom
Glider Rider for the Sinclair ZX Spectrum Z80
Topics: Glider Rider, Sinclair ZX Spectrum
3
3.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Jo-Einar Emblemsvag (Flyger)
data
eye 3
favorite 0
comment 0
This is a 3D printable toy glider that can be launched by hand or more reliably with a 3D printed rubber band shooter. The plane should be launched flat or with a slightly downwards trajectory, ideally from some height. If more weight is added to the nose, by adding infill to the nose part, the glider can be made speedier. Depending on printing speed all the parts can be printed in 5 hours or more, and glued together in 5-10 minutes with CA glue.
Topics: Model_Airplane, flying, Toy & Game Accessories, thingiverse, aircraft, glider, airplane,...
3
3.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Max Maslak (GlidingMax)
data
eye 3
favorite 0
comment 0
Eine Abdeckung für die Windenkupplung beim Discus 2c. Kann mit Nitto-Tape aufgeklebt werden.
Topics: Discus 2c, thingiverse, glider, sailplane, segelflugzeug, stl, Schempp Hirth, Sport & Outdoors
3
3.0
Jan 18, 2022
01/22
Jan 18, 2022
by
Marko Roolaid (Roolaid)
data
eye 3
favorite 0
comment 0
It's time to make one very large RC glider. The Windex 1200c is 1 / 2.5 scale VIDEO!!! https://youtu.be/UyjUGR8WVNk
Topics: ESUN, Ferrari, windex, thingiverse, RC_plane, carbon_fiber, gliders, motor, ferrari_logo,...
