135
135
Dec 21, 2009
12/09
by
Bendix Corporation. Industrial Controls Division
texts
eye 135
favorite 2
comment 0
Cover title
Topic: Metal-cutting tools
68
68
Jan 16, 2019
01/19
by
Chinn, Gary
texts
eye 68
favorite 5
comment 0
191 pages : 29 cm
Topic: Wood-cutting tools
Caption title
Topic: Wood-cutting tools
8
8.0
Feb 5, 2021
02/21
by
Chinn, Gary
texts
eye 8
favorite 0
comment 0
191 pages : 29 cm
Topic: Wood-cutting tools
38 53
Topic: Wood-cutting tools
72
72
Aug 16, 2017
08/17
by
Galimberti, James M; Swinehart, Haldon J., editor
texts
eye 72
favorite 2
comment 0
Includes bibliographical references
Topics: Metal-cutting tools, Ferramentas
This volume was digitized and made accessible online due to deterioration of the original print copy.
Topic: Metal-cutting tools--Cooling
This volume was digitized and made accessible online due to deterioration of the original print copy.
Topic: Metal-cutting tools--Mathematical models
34
34
Dec 13, 2018
12/18
by
Terry, Alexander Robert
texts
eye 34
favorite 0
comment 0
5 pages, 6 folded leaves of plates : 27 cm
Topics: Fuelwood, Machinery, Wood-cutting tools, Fuelwood, Machinery, Wood-cutting tools, Great Britain
This volume was digitized and made accessible online due to deterioration of the original print copy.
Topics: Metal-cutting tools, Mechanical engineering
34
34
Mar 29, 2021
03/21
by
McDonnell, Leo P
texts
eye 34
favorite 3
comment 0
vii, 294 p. : 27 cm
Topics: Carpentry -- Tools, Wood-cutting tools
28
28
Aug 3, 2017
08/17
by
King, Alan G; Wheildon, W. M., joint author
texts
eye 28
favorite 3
comment 0
xxii, 307 p. 24 cm
Topics: Metal-cutting tools, Ceramic materials
31
31
texts
eye 31
favorite 1
comment 0
ix, 262 pages : 29 cm
Topics: Metal-cutting tools, Schneidwerkzeug, Aufsatzsammlung
This volume was digitized and made accessible online due to deterioration of the original print copy.
Topics: Metal-working lubricants, Metal-cutting tools
39
39
Dec 13, 2018
12/18
by
Thomson, George
texts
eye 39
favorite 0
comment 0
6 pages, 3 unnumbered folded leaves of plates : 27 cm
Topics: Fuel, Fuelwood, Machinery, Wood-cutting tools, Fuel, Fuelwood, Machinery, Wood-cutting tools, Great...
103
103
Aug 3, 2017
08/17
by
Walker, William Francis, 1902-
texts
eye 103
favorite 3
comment 0
196 pages 22 cm
Topics: Jigs and fixtures, Metal-cutting tools
Benchmark for Faithful Digital Reproductions of Monographs and Serials. Version 1. December 2002
Topics: Wood-cutting tools, Machine-tools, Tools
5
5.0
May 10, 2022
05/22
by
Spielman, Patrick E
texts
eye 5
favorite 1
comment 0
128 p. : 26 cm
Topics: Sharpening of tools, Wood-cutting tools
The geometric modeling of the cutting tools is an important aspect for the design and manufacturing engineers from the viewpoint of shape realization. The geometry of cutting tools? surfaces based on two-dimensional (2D) projected geometry approach has certain limitations. This definition is also inadequate due to inaccuracy and non-applicability of the model for further manipulation. To address these issues, an accurate three-dimensional (3D) surface-based generic definition for a few families...
Topics: Milling cutters, Cutting tools, Mechanical Engineering
CIHM Monograph Collection
202
202
Apr 10, 2012
04/12
by
Expanded Metal and Fireproofing Co
texts
eye 202
favorite 0
comment 0
Printed ephemera
Topics: Metal-cutting tools, Outils de coupe
278
278
Aug 3, 2017
08/17
by
Kempster, Maurice Henry Albert
texts
eye 278
favorite 2
comment 0
For students of production engineering
Topics: Jigs and fixtures, Metal-cutting tools, Punching machinery
52
52
Aug 1, 2017
08/17
by
Tourret, R. (Richard)
texts
eye 52
favorite 0
comment 0
Includes bibliographical references
Topics: Metal-cutting tools, Outils de coupe, Corte, Ferramentas
466
466
Mar 4, 2015
03/15
by
Bale, M. Powis (Manfred Powis)
texts
eye 466
favorite 0
comment 0
Includes index
Topics: Stone-cutting tools, Stone-cutting, Stone industry and trade
60
60
Jan 26, 2020
01/20
by
English, John
texts
eye 60
favorite 4
comment 0
p. cm
Topics: Turning (Lathe work), Carbide cutting tools, CRAFTS & HOBBIES / Woodwork
Veneer and the methods commonly used to cut and dry it are described. The veneer industry and its products are also briefly discussed.
Topics: DTIC Archive, FOREST PRODUCTS LAB MADISON WI, *MANUFACTURING, *PLYWOOD, *FIBERBOARD, *WOOD, CUTTING...
192 p. ; ill. ; 17 cm. x 10 cm. ; trade catalog
Topics: masonry cutting tools -- catalogs, Division 04, brick masonry, unit masonry maintenance, unit...
26
26
Jan 11, 2021
01/21
by
Burrows, Dick
texts
eye 26
favorite 9
comment 0
128 pages : 29 cm
Topics: Carpentry -- Tools, Power tools, Routers (Tools), Sanding machines, Tools, Woodworking tools,...
145
145
texts
eye 145
favorite 6
comment 0
755 p. : 24 cm. +
Topics: Machine-tools -- Design and construction, Metal-cutting tools -- Design and construction, Gages --...
31 p. ; ill. ; 23 cm. ; trade catalog
Topics: thread cutting -- catalogs, metal-cutting tools, Division 05, Division 41, manufacturing equipment,...
Topics: DTIC Archive, JOINT PUBLICATIONS RESEARCH SERVICE ARLINGTON VA, *COMPUTER AIDED MANUFACTURING,...
This report contains translations/transcriptions of articles and/or broadcasts from the USSR on machine tools and metalworking equipment. Titles include: Politburo Approves Creation of Machine Building Bureau; Applied Research in Flexible Production Technology Surveyed; Trends in Machine Tool Deliveries Reveal Pattern of Shortages; Large Volume of Research Improves Production, FMS Systems; Overview of Literature, Research on Industrial Robots; and others.
Topics: DTIC Archive, JOINT PUBLICATIONS RESEARCH SERVICE ARLINGTON VA, *USSR, *MACHINE TOOLS,...
Topics: DTIC Archive, JOINT PUBLICATIONS RESEARCH SERVICE ARLINGTON VA, *CUTTING TOOLS, *METALWORKING,...
Topics: DTIC Archive, JOINT PUBLICATIONS RESEARCH SERVICE ARLINGTON VA, *COMPUTER AIDED MANUFACTURING,...
24 p. ; ill. ; 18 cm. x 23 cm. ; trade catalog
Topics: screw-threads -- catalogs, metal-cutting tools, Division 05, Division 41, metal tools,...
Cartridge, Powder Actuated Cutter, XM83, was de veloped as a replacement for the explosive ac tuator in the MC-1 reefing line cutter used with heavy duty parachute assemblies. Firing tests demonstrated that this cartridge, loaded with 6 grains of M2 propellant, 2 grains of A4 black powder, and an M29A1 primer, developed the pres sure required by the cutter to sever the nylon line specified in requirements. (Author)
Topics: DTIC Archive, Farrell, J M, FRANKFORD ARSENAL PHILADELPHIA PA, *PARACHUTE FABRICS, AIR DROP...
The results of this program demonstrated that it is feasible to use laser cutting of aluminum without edge enhancement in the fabrication of hardware where a sheared or blanked edge is acceptable to meet engineering requirements. However, it was further shown that it is not feasible to use an as-laser-cut edge for hardware where machined edges or hole filling fasteners are required to meet engineering requirements.
Topics: DTIC Archive, Lindh, Devere, BOEING CO SEATTLE WA, *ALUMINUM ALLOYS, *CARBON DIOXIDE LASERS,...
Topics: DTIC Archive, JOINT PUBLICATIONS RESEARCH SERVICE ARLINGTON VA, *COMPUTER AIDED MANUFACTURING,...
The development of a mathematical lofting system, a parts programming system for numerically controlled flame cutting, and numerically con trolled shipyard fabricating equipment is described. Program accomplishments, conclusions, and recommendations are summarized.
Topics: DTIC Archive, TODD SHIPYARDS CORP SAN PEDRO CA, *NAVAL ARCHITECTURE, COMPUTER PROGRAMMING, TORCHES,...
Topics: DTIC Archive, VEREZUB, V N, FOREIGN TECHNOLOGY DIV WRIGHT-PATTERSON AFB OH, *MACHINING, CUTTING...
Phase II results are presented for the program entitled "Establishment of a Cutting Fluid Control System." The Phase II objectives were to conduct a systematic evaluation of available cutting fluid products, refine the Phase preliminary RIA manufacturing process severity index and preliminary cutting fluid application matrix. The study showed the majority of observed machining operations involve milling, turning, grinding and boring procedures on 4100 series steels. A severity index...
Topics: DTIC Archive, Lieberman, G. A., TRW INC CLEVELAND OH MATERIALS TECHNOLOGY, *CUTTING FLUIDS,...
192 p. ; ill. ; 18 cm. ; trade catalog
Topics: tools -- catalogs, construction tools -- catalogs, Division 41, manufacturing equipment, cutting...
Efforts were directed to: the background work leading to the development of the system; revised specifications for an automatic parts programming language for shipyard requirements; a study and comparison of available automatic parts programming languages; results of production testing of the system; a discussion of the economies of numerically controlled flame cutting; conclusions drawn from experience to date; recommendations for future action.
Topics: DTIC Archive, TODD SHIPYARDS CORP SAN PEDRO CA, *COMPUTER AIDED MANUFACTURING, *SHIPBUILDING, INPUT...
This report from the USSR contains articles on Machine Tools and Metalworking Equipment.
Topics: DTIC Archive, JOINT PUBLICATIONS RESEARCH SERVICE ARLINGTON VA, *USSR, *MACHINE TOOLS, *CUTTING...
Ultrasonic impact grinding techniques are shown to be extremely useful in the fabrication of microcircuit substrates and other specialty component parts. Pertinent parameters of machine operation and tool design are discussed and detailed examples of applications are given. These include the fabrication of (1) sections of glass only 0.005 in. in thickness, (2) multihole substrates, (3) Hall measurement specimens, (4) tiny toroids, and (5) spiral grooves.
Topics: DTIC Archive, KRAWCZYK, JOHN, HARRY DIAMOND LABS ADELPHI MD, *GRINDERS, ABRASIVES, CUTTING TOOLS,...
This report contains translations/transcriptions of articles and/or broadcasts from the USSR on machine tools and metalworking equipment. Titles include: Recent Developments in Azerbaijani Metalworking Industry; Study reveals Significant Underutilization of Machine Tools; New Automated Machining Systems Raise Productivity, Quality; Flexible Production Systems in CEMA Countries Viewed; Leningrad Robotics Institute Heads CEMA Group; Production Delays Due to Shartage, Poor Quality of Cutting...
Topics: DTIC Archive, JOINT PUBLICATIONS RESEARCH SERVICE ARLINGTON VA, *USSR, *MACHINE TOOLS,...
An operating manual for a programming system for numerically controlled flame cutting of ships parts is presented. Computer programs, complete with operating instructions, flow diagrams, and program listings, are included. Sample programs and special instructions are provided to clarify the use of the system. The system presented has been developed using: (1) IBM-1620 computer, 60K memory, with card and tape input and output; (2) California Computer Products No. 560 digital plotter, connected...
Topics: DTIC Archive, TODD SHIPYARDS CORP SAN PEDRO CA, *TORCHES, *CUTTING TOOLS, COMPUTER LOGIC, ERRORS,...
Topics: DTIC Archive, JOINT PUBLICATIONS RESEARCH SERVICE ARLINGTON VA, *CUTTING TOOLS, *METALWORKING,...
Third Wave Systems (TWS) completed a project funded by the Aviation Development Directorate (ADD) to minimize distortion in an aluminum fatigue coupon machining process. To achieve the objective of this project, TWS utilized its Production Module NC toolpath optimization, AdvantEdge finite element modeling, and distortion modeling software packages. Efforts in Production Module consisted of setting up an analysis of cutting forces across the fatigue coupon toolpath and optimizing these forces...
Topics: DTIC Archive, Becker,Brian, Third Wave Systems, Inc. Eden Prairie United States, machining,...
The purpose of this report is to present a logical means of dissecting and testing Minuteman third stage M-57E1 Rocket Motor samples. This test plan outlines the test objectives, motor cut-up sequences, sample machining procedures, chemical and physical testing requirements to be followed for motor cut-up SD-25. The prime objective of this test is the determination of case- bond strength and propellant physical properties.
Topics: DTIC Archive, HERCULES POWDER CO MAGNA UT, *SOLID PROPELLANT ROCKET ENGINES, TEST METHODS, BONDING,...
The report covers the state of the art of metal-removal operations for titanium and its alloys. It describes the methods currently employed for conventional machining, grinding, electrolytic, and chemical machining processes. The precautions which should be taken to avoid troubles resulting from the characteristics typical of titanium are pointed out. Ten machining, two grinding, two cutting, and two unconventional metal-removal operations are discussed separately. In other sections, the...
Topics: DTIC Archive, BATTELLE MEMORIAL INST COLUMBUS OH, *MACHINING, *TITANIUM, *TITANIUM ALLOYS, MACHINE...
