5
5.0
Apr 8, 2021
04/21
by
(2Fast4U)
data
eye 5
favorite 0
comment 0
For CCD cam size 38mmx38mm.
Topics: fpv, Cam, R/C Vehicles, ccd, stl, mount, 350QX, holder, thingiverse, Quadcopter, camera, GoPro
4
4.0
Mar 20, 2021
03/21
by
(2Fast4U)
data
eye 4
favorite 0
comment 0
For CCD cam size 38mmx38mm and a Boscam 5.8Ghz 200mW Transmitter. You only need 4 cable Ties and a velcro to mount.
Topics: GoPro, stl, Cam, Quadcopter, thingiverse, transmitter, holder, 200mW, first, ccd, R/C Vehicles,...
8
8.0
Jan 16, 2021
01/21
by
(2beers)
data
eye 8
favorite 0
comment 0
Hallo! Update 08.10.2017 Ich habe eine Version mit 10 Grad Neigung nach unten erstellt. Dazu muss man aber den Rumpf des Opterra bearbeiten. Das ist ein Schnellverschlusssystem für die Gopro Hero 5 Session passend für den Eflite Opterra. Gedruckt wurden die Teile mit 0.3mm Nozle in PLA Die zwei Stifte zum Verriegeln sind mit einem 1,8mm Federstahldraht realisiert. Die Drähte sind 49mm lang und werden bei 40mm abgewickelt. Dies ist eine Abwandlung meiner Halterung für die Xiaomi YI...
Topics: camera, opterra, session5, hero, kamera, flieger, R/C Vehicles, mount, Eflite, session, stl,...
10
10.0
Jan 11, 2021
01/21
by
(2beers)
data
eye 10
favorite 0
comment 0
Hallo! Diese Halterung wurde zur Befestigung einer RunCam Owl auf einem Opterra von der Firma Eflite entworfen. Ich habe die Halterung aus PLA mit einer 0.5mm Nozle gedruckt. Viel Spaß damit. Lg, Tobias
Topics: hobby, R/C Vehicles, thingiverse, stl, eflite, flieger, mount, runcam, cam, halterung, horizon,...
11
11
Apr 21, 2021
04/21
by
(2beers)
data
eye 11
favorite 0
comment 0
I have printed it with 20% Infill Partlist: 1x mini USB Connector http://www.banggood.com/10pcs-Mini-USB-5Pin-Male-SMT-SMD-Plug-Soldering-Jack-Connector-Metal-Socket-p-979310.html 1x Bec Connector http://www.banggood.com/Wholesale-2-Pairs-15cm-JST-Connector-Plug-With-Connect-Cable-For-RC-BEC-ESC-Battery-p-50769.html 1x DC Converter http://www.banggood.com/Mini-DC-DC-Converter-Step-Down-Module-Adjustable-Power-Supply-p-920327.html 1x 5.8gHz Videotransmitter...
Topics: thingiverse, stl, Hobby, fpv docking, fpv, mobius_cam, fpv dockingstation, fpv_camera_mount,...
3
3.0
Oct 14, 2021
10/21
by
(Bastrym)
data
eye 3
favorite 0
comment 0
Simple but very smooth 4th axis stabilizer. You will need : Rubber band (i used 3mm diameter) 687-2RS Ball bearing....4X M3x10 screw...4X M3X12 screw+ nuts ...4x 10x5x1 mm washer...8x M3x18+ nut m5x30+ nut Srew and nut for GoPro sytem (any action cam type) https://youtu.be/6tlEYN5iuWI
Topics: 4th_axis, DJI_Osmo, thingiverse, stl, DIY, cam stabilizer, gimball, osmo pocket, action cam
4
4.0
Jan 9, 2021
01/21
by
(Bigshow4u)
data
eye 4
favorite 0
comment 0
Mount for Runcam Split v4. Maid mainly for larger rockets but can be adapted to many uses.
Topics: runcam_mount, thingiverse, Hobby, Runcam_Split, stl, Runcam_split_v4, Rocket Cam
11
11
Apr 28, 2021
04/21
by
(CheopisIV)
data
eye 11
favorite 0
comment 0
These old winders are amazing machines, but the cams and gears are extremely hard to source! I was lucky enough to get two nearly complete machines and gear sets, but cams were a different story. I designed these to fit the shaft on my Geo Stevens 39AM and 38AMI but they'll fit any other Geo Stevens winder and likely any other brand that uses a 1/4" shaft. Included are the STL and DXF files, I had mine cut by a CNC company in Acrylic and have been running them for almost a year with no...
Topics: Geo Stevens 38AMI, Cam, thingiverse, Geo Stevens, Pickup, Tele, Heart Shaped Cam, Machine Tools,...
5
5.0
Mar 13, 2021
03/21
by
(CoffeCup)
data
eye 5
favorite 0
comment 0
Since the Thingiverse team unfortunately can't get the ongoing technical problems under control, I decided to change the portal. My projects published here are no longer maintained by me. All projects have migrated to the new platform and can be downloaded there. Please visit me on my new page: my new profile on Cults3d.com ESP32-CAM Module To realize your own SmartHome projects with the ESP32-Cam module you will find the SketchUp-File of the module in download section. ESP32-CAM (AliExpress)...
Topics: thingiverse, kamera, github, video_game, esp32, video, Kamerastativ, smarthome, foto, stl, arduino,...
5
5.0
Mar 13, 2021
03/21
by
(CoffeCup)
data
eye 5
favorite 0
comment 0
Since the Thingiverse team unfortunately can't get the ongoing technical problems under control, I decided to change the portal. My projects published here are no longer maintained by me. All projects have migrated to the new platform and can be downloaded there. Please visit me on my new page: my new profile on Cults3d.com Gehäuse für ESP32-CAM Modul Die lange Halterung passt genau auf die Korpusteile des Anet A8 (Acryl) Einfach aufschieben - fertig. Die kleine Befestigungsplatte kann zur...
Topics: anet a8, anet, espresso, camera_mount, Kamerastativ, gehä, use, Camera, cam,...
4
4.0
Mar 20, 2021
03/21
by
(DarkoDDio)
data
eye 4
favorite 0
comment 0
Just designed it, I still need to print and test UPDATE: Printed: 1st version has some problem with some measure, do not print, I will post a new model in next few days
Topics: Myriwell, stl, Camera, Hamlet, Dlink, D-Link, Webcam, thingiverse, Freesculpt, 3dx100, cam
9
9.0
Mar 19, 2021
03/21
by
(Dogbert)
data
eye 9
favorite 0
comment 0
This is my uni-joint and handle derivative for Frits' steadicam. I wanted the uni-joint and the handle to be as short as possible. I printed the derivative uni-joint from aron (http://www.thingiverse.com/thing:14335) but just found it to be too long and bulky for my liking. (It is awesome for other uses though - it's in use in another project!) This is made mainly with two printed parts, a 5/16 male/female ball joint, a cheap $5 Arlec LED torch and a skate bearing. From the two printed parts -...
Topics: handle, Art Tools, steadicam, stead_i_cam, thingiverse, universal_joint, stl
5
5.0
Jun 11, 2021
06/21
by
(Electronlibre)
data
eye 5
favorite 0
comment 0
Summary Hello, Update 3 : back cover much strong and doesnt fall down anymore ;) Update 2 : add a new foot, mounting wall, for an external Wifi antenna for extended range :) Previously, back again with this excellent simple camera board! added a PIR sensor :https://www.banggood.com/3Pcs-Mini-IR-Infrared-Pyroelectric-PIR-Body-Motion-Human-Sensor-Detector-Module-p-1020422.html?rmmds=myorder&cur_warehouse=CN Configuration under Hassio on a Raspberry Pi 3B+ in...
Topics: camera_mount, thingiverse, pir sensor, antena_mount, ESP32-CAM, stl
9
9.0
Jan 14, 2021
01/21
by
(FENIX_)
data
eye 9
favorite 0
comment 0
This is an All-In-One case and mount for a HS1177 style camera. It has been tested with a Foxeer and generic unbranded HS1177 from Banggood. The mounting holes are designed for the Realacc x210 Pro. It will not fit the standard Realacc x210 due to the standoffs being closer.
Topics: R/C Vehicles, thingiverse, HS1177, stl, foxeer, Realacc x210 pro, runcam swift, runcam, cam, fpv,...
12
12
Mar 22, 2021
03/21
by
(FiveNights)
data
eye 12
favorite 0
comment 0
Enjoy... May the Force be with you ... Works best with Alfawise U30 - 3D printer https://youtu.be/ICzUsIKQpIw
Topics: girl, stl, bust, Action_Cam, thingiverse, minis, Ahsoka Tano, model, FDM, free, star_wars, art,...
3
3.0
Mar 22, 2021
03/21
by
(FiveNights)
data
eye 3
favorite 0
comment 0
https://youtu.be/7Jo3JXZp9gw
Topics: drone, stl, customized, vr camera, cover, Camera, insta360, battery cover, Insta360OneR, 360...
3
3.0
Mar 5, 2021
03/21
by
(FiveNights)
data
eye 3
favorite 0
comment 0
This (ring) should be used when shooting action with your OneR cam & boosted batt. (as the ring presses tightly base and battery together) https://youtu.be/BNRlQGdTVFA I suggest you use SILK-PLA or PETG filament they are not fragile and more shock absorbing https://www.sunlu.com?sca_ref=303472.UlqHB8oz2b
Topics: video, Action_Figure, bracket, battery, base holder, magic ring, 3D_Slash, camera, Camera, action...
6
6.0
Jan 22, 2021
01/21
by
(FiveNights)
data
eye 6
favorite 0
comment 0
Now you can travel with your camera a lot easier and without any worries...
Topics: xiaomi, misphere, photography, camera, 360 video, madventure360, Xiaomi_M365, stl, travel_case,...
6
6.0
Apr 20, 2021
04/21
by
(Gasolin)
data
eye 6
favorite 0
comment 0
This is a way to Mount a Raspberry Pi Webcam on an 3D-Printer with an Magic Arm. For this, you need an Magic Arm (~300mm) with a 1/4" thread, a RPI Webcam, two M3x10 Screws, two M3x5x5 thread inserts or M3 Nuts and some Superglue. I used a Wide Angel Webcam with IR Lights, but any other Cam should work too. Just pay attention to the placement of the ZIF Socket for the Ribbon Cable. Maybe some adjustment is needed to fit a different Camera Module. The Clip that holds the Camera needs to be...
Topics: arm, thingiverse, cam, stl, webcam, Magicarm, prusa_i3_mk3, Raspberry_Pi, 3D Printer Accessories,...
9
9.0
Apr 23, 2021
04/21
by
(Hans_P)
data
eye 9
favorite 0
comment 0
Case with lens cap & end cap for Sony AS200V action cam.
Topics: AS200V, Camera, HDR-AS200V, stl, Action_Cam, thingiverse, sony
4
4.0
Apr 27, 2021
04/21
by
(IOI671701)
data
eye 4
favorite 0
comment 0
With classes moving to "online" due to the COVID-19 issues, a professor asked me for a design to hold a cell phone so it can be a document camera for telecon (Zoom) meetings. This is sized for that professor's phone with case, a BlackBerry Key2 in a slim Tudia Merge case. My guess is that this is too specific for mass use, but it's being uploaded so others can see a cheap useable solution that may give other designers ideas. The professor was using this octopus "helping...
Topics: thingiverse, camera, document, stl, key2, Office, document_cam, BlackBerry
3
3.0
May 1, 2021
05/21
by
(JJ_White)
data
eye 3
favorite 0
comment 0
Can't find focus with your Raspberry Pi HQ Camera on your Celestron FirstScope (or similar)? Me neither, so I made this adapter that bolts to the camera instead of the stock C-mount and replaces the part in the FirstScope focus mechanism that has the set screws to retain the eyepieces. Result is that the camera screws directly into the focus mechanism, gaining 10-20mm of focus distance. This adapter removes the IR filter on the Pi camera, so if you don't want to shoot in IR too, you'll need to...
Topics: stl, Focuser, Raspberry_Pi, raspberry_pi_HQ_cam, celestron_firstscope, Physics & Astronomy,...
9
9.0
Apr 23, 2021
04/21
by
(JonBAL)
data
eye 9
favorite 0
comment 0
ION Air Pro camlock action extreme camera. Lock, mount, repair, part, cam lock.
Topics: Camera, ION_Air, action_camera, stl, ION, holder, camera, Action_Cam, thingiverse, ION_Air_Pro,...
10
10.0
Apr 30, 2021
04/21
by
(Layers)
data
eye 10
favorite 0
comment 0
This is a remix of the frame attachment hooks in nigeljohnson73's Pi Cam harness. I've created a model that sits under the Wanhao Duplicator i3 Plus base . Use this, along with the original files, to create a solid stand for your raspberry pi camera (works great with Octoprint). This base hook works well and provides good stability for the rest of the Pi Cam harness. Will fit on either the left or right side of the screen, as well as anywhere along the backside of the printer. For printing a...
Topics: stl, raspicam, rpi_camera, raspi_cam, Raspberry_Pi, raspberry_pi_camera, RPi_cam, wanhao_i3_plus,...
8
8.0
Jun 12, 2021
06/21
by
(M1Quel)
data
eye 8
favorite 0
comment 0
Summary Sony Action Cam Mount for Shotgun 12 Gauge Safety first! Be careful when shooting! Happy Printing Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: No Resolution: .1 .2 .3 doesn't matter Infill: 100%
Topics: Sony, Action Cam, over and under, Elos C, Camera, Fabarm, Skeet, Trap, x1000v, 12 Gauge, hunting,...
9
9.0
Jun 11, 2021
06/21
by
(M1Quel)
data
eye 9
favorite 0
comment 0
Summary Made a remix of this mount to fit the original screw with the large 14mm head. Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: Yes Resolution: ,1 or ,2 Infill: 30%
Topics: Sony, cam, camera, thingiverse, action, GoPro, mount, stl
4
4.0
Apr 12, 2021
04/21
by
(McRunBecks)
data
eye 4
favorite 0
comment 0
This Pan and Tilt will fit into the cockpit of the Durafly P51D. You will need: Two 9g servos One Cross arm One single arm Four servo mounting screws spy cam
Topics: thingiverse, fpv_aircraft, fpv, stl, R/C Vehicles, FPVLAB, fpv_cam
10
10.0
Jun 11, 2021
06/21
by
(Melty_Witch)
data
eye 10
favorite 0
comment 0
Summary A window glue/epoxy adapter to mount a fairly good, and cheap, DVR to your window or other transparent surface permanently. First, use super glue to attach the dash cam to the adapter, then use super glue again, or an epoxy (JB Weld or a clear marine epoxy) to mount the adapter, ridged-side-towards-glass, to the window. The ridges give more surface area for the epoxy or glue to grab to, and also ease removal later if you ever want to remove it. Much better than a suction cup mount that...
Topics: adapter, thingiverse, dashcam, dvr, dash_cam, stl
5
5.0
Jun 19, 2021
06/21
by
(Neophyte)
data
eye 5
favorite 0
comment 0
Summary I recently bought a cheap "spy-pen" camera to mount on my HPI Savage-X monster truck to record the action while playing around with it. There isn't much place to mount the cam and the easiest in my mind is on the front bumper right behind the bull-bar. The bumper mount provides for adjustment so you can adjust the pen cam's angle to your liking. Obviously, only the upper half of the pen with the cam is mounted and not the full length pen. Instructions Remove the front upper...
Topics: video, action, HPI, cam, thingiverse, mount, stl, camera, part
2
2.0
Jan 18, 2022
01/22
by
(Nicrowelle)
data
eye 2
favorite 0
comment 0
A simple action cam tripod. The legs come in 2 variations, one light and one heavy. In the pictures you see the light variant, the heavy is from the dimension like the light only that the space in the middle is filled. In height the tripod measures 100mm without camera. thank you and have fun printing BOM: 1x M5 nut 3x M3x16 screw 3x threaded insert M3 (I used Ruthex M3x5.7)
Topics: action_camera, tripod_adapter, thingiverse, ActionCam, actioncam_mount, camera_tripod,...
5
5.0
Mar 17, 2021
03/21
by
(Photogad)
data
eye 5
favorite 0
comment 0
If you have a ring floodlight cam or spotlight cam outside your home, you know when it rains very heavy or snows, water tends to run down the front of the camera and block the lens. This is a hood (top cover) you can print to attach to the top of the camera body to keep water away.
Topics: top, ring_camera, Outdoor & Garden, ring_floodlight_cam, cover, camera, ring, ring_cam_hood,...
5
5.0
May 1, 2021
05/21
by
(Photogad)
data
eye 5
favorite 0
comment 0
I made this to mount a 5.5mm endoscope on to my extruder and make a nozzle cam controlled by Raspberry Pi and Octoprint. This rear mounted design is the easiest to install and has the best cable management. Basically it just adds another zip-tie slot, and a few bumps that help push the endoscope to the correct angle. I'm sure someone can come up with a better design but I couldn't find a way personally to more securely hold the endoscope camera without making the other wires stick out too far...
Topics: stl, bear, nozzlecam, prusa, camera, mk3, 3D Printer Parts, cam, prusa_i3, mk3s, thingiverse,...
12
12
Jan 10, 2021
01/21
by
(PolymerJ)
data
eye 12
favorite 0
comment 0
Needed a fast and easy way to mount cams. One of these has an overhang or more support if needed.
Topics: thingiverse, 3D Printing, stl, 2020_mount, 2020 cam mount, 2020_clip, 2020
3
3.0
Jan 11, 2021
01/21
by
(Pugwash)
data
eye 3
favorite 0
comment 0
A round clamp for a bullet-cam on a CBR1100XX windscreen bolt. This may fit other bikes but I've designed it for the twist required to point my camera at the correct angle. It includes a rotation marker to aid with level adjustment. My camera is a 24mm diameter Roadhawk Ride R+ a.k.a. Dogcam
Topics: thingiverse, Camera, stl, mount, RoadHawk_Ride, bullet cam, Honda Blackbird, Honda_motorcycle,...
0
0.0
Aug 14, 2022
08/22
by
(PunkinLauncher)
data
eye 0
favorite 0
comment 0
This model is designed to replace the back half of the ps3 eye camera shell in order to add a more easily mountable base to the camera. The lower with arm and two provided bases are designed to be held together with a number 8 bolt, and then mount to 8020 aluminum extrusion using 1/4 - 20 bolts. The upper and bases can be printed without support but I would recommend printing the lower with support.
Topics: ps3_eye, modular, camera_mount, Camera, Ps3_cam, camera, ps3eye, stl, thingiverse, PS3, fusion_360
11
11
Jan 11, 2021
01/21
by
(RM_3D)
data
eye 11
favorite 0
comment 0
Angel Combo Read file names 45 deg. 35 deg. Tight fit on the FPV cam. Loosen the standoff when sliding it on so you get more space, then re tighten. Glued the cam with hot glue. Not yet tested on the SKUNK 220, but should fit. Print time may differ. The fpv-cam holder should be 15-25 min. Print time on both on medium quality was Ca 1h 15min.
Topics: Thug GoPro, thingiverse, Hobby, stl, Thug, Thug FPV cam, Skunk, thugframes, Squeeler
11
11
Jan 11, 2021
01/21
by
(RaMcHiP)
data
eye 11
favorite 0
comment 0
a mount for the cheap chinese 4k action cams from the wish app. Mount is shifted to the side to align with the center of the optics. There are 2 different configurations for each side of the mounting accessories. I printed this at .2 layer height with supports on the clip and light cutout in NylonX nylon/cabon fiber filament.
Topics: thingiverse, Camera, stl, ActionCam, Action_Cam, Chinese, camera_mount
3
3.0
Oct 15, 2021
10/21
by
(Raikou67)
data
eye 3
favorite 0
comment 0
Conceptual print for a quick-release vertical base mount. Mount the male end to a surface loosely (but secured) with a #10 screw. Female profile is to be added to the component being mounted as a fixed piece. Engage with the three-prong male base and lock with a quarter turn (90 degrees) of the male end. Pulling up draws the prongs together and clamps the ID of the profile. Pushing down forces the prongs out to grip the OD of the profile. The cam mount is NOT designed to lock rotation to allow...
Topics: thingiverse, stl, PLA, locking_mechanism, component, cam, quick_release, 3D Printing, pinch,...
3
3.0
Mar 25, 2021
03/21
by
(Redd)
data
eye 3
favorite 0
comment 0
I like video, but the action cameras are not hand / wear comfortable, so I let's improve it! The necessary materials are in the images. You will need the GoPro or compatible adapters shown in the pictures. The inserts get with the tin soldering iron on the opposite side, it gives them extra strenght. There is a standard thread of 1/4 on top for a ligth torch or accessory and bottom for a tripod. The tape for your hand or lanyard it´s up to your imagination, i use some velcro that have liying...
Topics: stl, Camera, video, thingiverse, camcorder, yicam, GoPro, Action_Cam
9
9.0
Jan 14, 2021
01/21
by
(RobidaFlats)
data
eye 9
favorite 0
comment 0
This is a mount to hold a lens filter for the [FITFORT Action Camera](https://www.amazon.com/gp/product/B06XFM62GB/). At the time of design, there were no lens filters specifically designed for this camera and the round lens cover made it incompatible with filters designed for the GoPro's square lens cover. This particular mount is designed for use with [these filters](https://www.amazon.com/gp/product/B00JL0U0E6) but would work with any brand as long as the dimensions are the same. UPDATED...
Topics: Camera, thingiverse, Filter, action_camera, stl, Action_Cam, lens_filter, GoPro, FITFORT
4
4.0
Mar 15, 2021
03/21
by
(Scorch1262)
data
eye 4
favorite 0
comment 0
Teile: ruthex Gewindeeinsätze M3 Amazon: B08BCRZZS3 Servos MG90S Amazon: B086V7TXXC Kugellager 20 x 37 x 9mm Amazon: B0823J5NJ6 Kugellager 50 x 65 x 7mm Amazon: B00OV18E5M Raspberry Pi HQ Kamera Conrad: 2264546 - YD Raspberry Pi Kamera V2 Amazon:
Topics: thingiverse, Robotics, raspberry_pi_HQ_cam, raspberry_pi_camera, stl, Servo_MG90s, Raspberry_Pi
4
4.0
Mar 15, 2021
03/21
by
(Scorch1262)
data
eye 4
favorite 0
comment 0
passend für: Objektiv Amazon: B07KWZKJ8Z
Topics: Sport & Outdoors, thingiverse, raspberry_pi_HQ_cam, stl, Raspberry_Pi
0
0.0
Aug 15, 2022
08/22
by
(Shiyaku)
data
eye 0
favorite 0
comment 0
This bracket can be used for mini cameras and other devices with 1/4" threads. It is designed to mount a small camera by screwing it to a wall or a pillar for fixed-point observation. Requires M6x25mm bolts and nuts. The long bolt in the photo is temporarily attached, so it is too long, but don't worry about it. このブラケットは1/4インチネジを持つミニカメラ等に使用することができます。...
Topics: camera_mount, Mounter, bracket, stl, Action_Cam, thingiverse, GoPro, Camera
0
0.0
Aug 13, 2022
08/22
by
(Shizby)
data
eye 0
favorite 0
comment 0
I made this mount for a cheap endoscope to turn it into a nozzle camera for my Ender 3 S1. It's adjustable and uses the stock M3 screws for mounting. The clip fits a 7.5 mm camera and up to 9 mm with some persuasion if you print the clip with PETG. The clip uses an M3 screw and nut for attachment. Prints quick in about 20 minutes and uses very little material!
Topics: 3D Printer Accessories, mount, ender3_s1, ender3s1, nozzle, camera, stl, ender_3_s1, PETG,...
10
10.0
Mar 19, 2021
03/21
by
(StefdeGroot)
data
eye 10
favorite 0
comment 0
The hacking of webcams is all over the news here in The Netherlands.I decided to block my cam with a 3d-printed part. It is designed for the HP EliteBook 8570w. It's a long shot, so if this is not your laptop, maybe you can use this as inspiration for your own privacy and/or use the Solidworks file.
Topics: block, privacy, protection, security, secure, laptop, Office, 8570w, thingiverse, HP, Cam, Webcam,...
4
4.0
Jun 6, 2021
06/21
by
(Stikstofman)
data
eye 4
favorite 0
comment 0
Designed to mount a SQ11 mini action cam on top of the DJI Tello. Flight tested under calm weather conditions, will require gravity calibration on the Tello. Also required for assembly are 2 sets of M3 size nut and bolt, assembly is self-explanatory. Version 1.1: Added a joint so the actioncam is now adjustable (up and down), the old rigid version is also still available.
Topics: tellobros, mini action cam, adjustable, DJI Tello, Ryze Tello, drone, thingiverse, quadcopter,...
9
9.0
Jan 17, 2021
01/21
by
(Syngenta)
data
eye 9
favorite 0
comment 0
Very tight fit but very stable. Print with ABS if you want to use it outside, PLA isn´t UV stable. It fit´s on my victure action cam, i don´t know if it´ll fit on gopro´s aswell. Please let me know which action cam you´re using and whether it worked for you or not. Fits: Victure ... Doesn´t fit: Rollei ... Print with support. I have also uploaded a flat version.
Topics: motorcycle, Automotive, GoPro_Mount, thingiverse, motorcycle_helmet, helmet_mount, action_camera,...
10
10.0
Jan 17, 2021
01/21
by
(Syngenta)
data
eye 10
favorite 0
comment 0
It is a very tight fit but once youve attached your action cam, it wont move. I use a victure action cam but it should fit on gopro too. Please let me know which camera you are using and whether it works for you or not. I have also uploaded a curved version.
Topics: motorcycle, Automotive, GoPro_Mount, thingiverse, helmet_mount, action_camera, action_camera_mount,...
6
6.0
Apr 20, 2021
04/21
by
(TemporalemFinem)
data
eye 6
favorite 0
comment 0
Mount designed to replace the lamp from an old/cheap/generic LED headlamp I had, should fit other similar ones. Designed and tested for a Hawkeye Firefly 8S but should fit others fine. v2 is slightly adjusted and some filleted edges for a better fit but haven't tried to print it, just manually adjusted v1 print for my own.
Topics: GoPro, thingiverse, stl, Hawkeye_Firefly, Camera, ActionCam, Action_Cam
9
9.0
Mar 10, 2021
03/21
by
(TheDirector)
data
eye 9
favorite 0
comment 0
Mobius Action Cam mount for Horus Kestrel - 15 Degree Original Horus Kestrel: http://horus-drones.com/ https://grabcad.com/library/horus-kestrel-3d-1 Reinforced remix: http://www.thingiverse.com/thing:1686332
Topics: multicopter, fpv_racer, fpv_camera_mount, R/C Vehicles, stl, thingiverse, Vtail, fpv, multirotor,...
