43
43
Jan 10, 2021
01/21
by
Megan Ebsen (dialhero)
data
eye 43
favorite 0
comment 0
33 mm inside 37 mm outside
Topics: aquaponics_pool, thingiverse, hydroponic, stl, hydroponics, aquaponics, aquaponic, plants,...
Aquaponics is the integration of recirculating aquaculture and hydroponics in one production system. Nepal as an agricultural country has a higher prospect of this system. As the demand for fish and healthy vegetables and fruits are increasing in Nepalese market, aquaponics can be flourished as an alternative way for the optimum utilization of resources. With the increasing population, urbanization and industrialization, the land has been scarce for agriculture which leads to the higher scope...
Topics: Aquaponics, hydroponics, agriculture.
3
3.0
Jun 12, 2021
06/21
by
Joachim Bongers (aquaponics)
data
eye 3
favorite 0
comment 0
Here a early christmas gift for the masses my own designed left turning vortex starting bell siphon for faster water movement because water flows faster in a fortex en left turning because it gives a imploding energy to the water to reset the memory of the water so your plants and fish get the best water ! and a hexagonal pattern for also faster water movement ,less turbilence in the flow and it looks nice if you combine it with a glase vase on top in the gap of it to look at the vortex...
Topics: aquaponics, aquaponics_farm, thingiverse, bell_siphon, Outdoor & Garden, stl
10
10.0
Apr 22, 2021
04/21
by
Alexander Schmidberger (hyper4711)
data
eye 10
favorite 0
comment 0
A Plant Pot for Aquaponic / Hydroponic Sketchup File: https://3dwarehouse.sketchup.com/model.html?id=uf7296e58-ea9d-48c8-9057-5482a28e994e https://3dwarehouse.sketchup.com/model.html?id=u55f0adda-ecce-414c-95d4-b9ea6fbb279c
Topics: stl, aquaponics, Other, thingiverse
The world may not support society’s current habits forever. We need new sources of energy, less co2 emissions and more sustainable lifestyles. To put it on other way the world needs double the present supply of energy while cutting co2 emissions to larger extent. To achieve more energy requirement with less co2 we need to conserve and diversify our energy sources sustainably. Bio fuels will and should become a vital part of the future energy mix. Sustainability should be the central idea to...
Topics: Aquaponics, Greenest Feedstock, Duckweed
15
15
Apr 11, 2021
04/21
by
Kevin (abrokadabra)
data
eye 15
favorite 0
comment 0
The model is 1:101 scale Suggested print size: 200% The vertical planters are made of 6" x 8' PVC pipes, connected with 2x4s. Two 250w HPS bulbs hang in the center of each plant module. The basin is made of wood, and waterproofed using pond liner. The Fish Modules can be made of chicken wire (or smaller netting) wrapped around a simple wooden frame, and rests in the basin. The plant modules sit above the fish bins and water basin, and are watered using water directly pumped from the basin....
Topics: thingiverse, Biology, farm, aquaponics_farm, indoor_farm, modular, aquaponics, farming, stl
3
3.0
Mar 10, 2021
03/21
by
Michal Pielaszkiewicz (Yautay)
data
eye 3
favorite 0
comment 0
My fast and dirty water inlet module
Topics: aquaponics, stl, thingiverse, Other
41
41
Jan 10, 2021
01/21
by
Megan Ebsen (dialhero)
data
eye 41
favorite 0
comment 0
32 mm inside 36 mm outside
Topics: plant, aquaponics_pool, thingiverse, hydroponic, stl, hydroponics, aquaponics, fish_tank,...
9
9.0
Apr 23, 2021
04/21
by
(gaby_64)
data
eye 9
favorite 0
comment 0
5380L fish tank 1359L grow bed 5.95 square meter of grow bed 2" hex netting as support 14.5mil PVC pond liner as container
Topics: stl, aquaponics, Buildings & Structures, thingiverse
15
15
Mar 19, 2021
03/21
by
Jacob Baron (barontechnologies)
data
eye 15
favorite 0
comment 0
These are intended to work with a small trough-based system I built for my fish tanks.
Topics: thingiverse, aquaponics, Outdoor & Garden, stl
3
3.0
Jul 3, 2021
07/21
by
alex domingo (alxdom)
data
eye 3
favorite 0
comment 0
this can widen the suction of the fish poop pipe size is 1 1/4
Topics: thingiverse, stl, aquaponics, Outdoor & Garden
11
11
Mar 24, 2021
03/21
by
MrAdventure (MrAdventure)
data
eye 11
favorite 0
comment 0
This is a semi-successful method to raise plants in the same tank as you raise fish for your aquaponics system. The top piece slips into a plastic construction net, which you suspend above your pond. It is a convenient size for holding a single piece of an egg carton, which you use to grow your plant in. The bottom piece gets pinned to the top, but is under the net. You screw a 12 oz drink bottle into it, with a few slits or holes cut into it for water flow, and it protects the roots of the...
Topics: stl, Outdoor & Garden, aquaponics, thingiverse
The present study reports the results of the production of Nile tilapia (Oreochromis aureus) and tomato (Solanum lycopersicum) in the classical aquaponic system (one-loop) with different fish density. The experiment as the first scientific aquaponics study in Turkey was conducted at the Ankara University, Faculty of Agriculture, using in-door, small-scale classical aquaponic systems. Ninety six tilapia juveniles (O. aureus) were stocked at different ratio; 25 kg/m3 (Group I), 35 kg/m3 (Group...
Topics: aquaponics, tilapia, tomato, fish growth
2
2.0
Oct 29, 2021
10/21
by
Zachary Shaffner (zshaffner)
data
eye 2
favorite 0
comment 0
This is an aerator I designed for use in my aquaponics fish tank. The openings are for 1/2'' pvc pipe and it is meant to be mounted vertically, it may still work at an angle or horizontal but I haven't tested it in those scenarios.
Topics: thingiverse, aquaponics, venturi, stl, Other
3
3.0
Mar 31, 2021
03/21
by
Barend Nieuwoudt (BennieWasHier)
data
eye 3
favorite 0
comment 0
This clips on the the side of my tank, and keeps the pump cable in place. It was designed for an aquarium with 6mm glass.
Topics: thingiverse, aquarium, aquaponics, Pets, stl
4
4.0
Mar 15, 2021
03/21
by
John Russell (Thorz_Hamer)
data
eye 4
favorite 0
comment 0
Made from PLA standard settings. Will rest in a Ø 2" hole.
Topics: thingiverse, hydroponic, stl, aquaponics, Outdoor & Garden
4
4.0
Aug 8, 2021
08/21
by
Fred Staniga (fredsta)
data
eye 4
favorite 0
comment 0
SLO inlet for 50mm DWV PVC pipes. Used to fit over the outlet of fishtanks, has 6mm holes to exclude fish. Adjustable height. Print on flat end, with no supports.
Topics: thingiverse, aquaponics, Outdoor & Garden, fishtank, stl
4
4.0
Mar 9, 2021
03/21
by
Alan Carlson (alcarl88)
data
eye 4
favorite 0
comment 0
Flow spout for 1 1/2" pipe. Creates much more aeration of the water than just pointing the pipe down into the tank. This is what I have installed in the fish tank of my aquaponic system. Even when my main aeration system went down this was sufficient to keep them healthy until I got the air pump repaired. Original part is set to public at OnShape. You are welcome to scale up or down to different size pipes. Just search for "Spout for 1.5" pipe (1.9" dia)" and make any...
Topics: hydroponics, stl, thingiverse, aquaponics, Outdoor & Garden
5
5.0
Mar 9, 2021
03/21
by
(BuckStarchaser)
data
eye 5
favorite 0
comment 0
This is a spillway pipe-topper that I made to ease the transition of water flow in one part of my aquaponics system. I made it for my SLO (solids-lift overflow), but I suspect it would also be appropriate for use inside a bell siphon. The rounded/enlarged lip of the Morning Glory (or Glory-Hole) spillway gets the water to transition into the downpipe without piling up at the edge. The improvement is surprisingly effective at flowing water. So much so, that the overflow pipe does not need to be...
Topics: stl, thingiverse, aquarium, aquaponics, Outdoor & Garden
16
16
Apr 8, 2021
04/21
by
Hassan (hassanul)
data
eye 16
favorite 0
comment 0
Inspired by Thebaronc 's hydroponics net pot http://www.thingiverse.com/thing:233963 I made this pot for my aquaponics system. It is has thicker walls for better structural integrity. The lip on top is filleted to prevent any printing errors caused by overhangs. See it in action in my blog: https://hassanulmakers.wordpress.com/2014/06/19/aquaponics-with-ti-msp-exp430fr5969-2/ 90mm X 90mm X 76.05mm Hole size and height is about 3" Made in Autodesk Inventor 2012
Topics: hydroponics, aquaponics, stl, thingiverse, Outdoor & Garden
13
13
Mar 16, 2021
03/21
by
LowCarb TNPer (LowCarbTNPer)
data
eye 13
favorite 0
comment 0
2" Outlet Strainer for Aquaponics or other purposes
Topics: aquaponics, Sport & Outdoors, stl, thingiverse, aquaponic
9
9.0
Jan 13, 2021
01/21
by
Sean Eyler (Synthecus)
data
eye 9
favorite 0
comment 0
As a fellow do-er of aquaponics, I have always had the trouble of my substrate getting under the PVC tube barrier that holds the substrate back from the bell siphon. So I decided to make a stand for large diameter PVC that will allow you to easily slip your large PVC tube into the base, and the base will keep the substrate from sneaking in under the bottom. There are holes and grooves to help prevent any anaerobic conditions from arising. Tolerances are at +0.03 in for the PVC tube diameter.
Topics: 3D Printer Parts, aquaponics, thingiverse, stl
3
3.0
Jul 3, 2021
07/21
by
Nam Tran (namfromnam)
data
eye 3
favorite 0
comment 0
Designed custom legs for the Finnex Planted+ 24/7. This is used for growing aquaponics plants in my tank. Printing: Layer height: 0.20mm Infill: 15% Supports: Tree Printed vertically
Topics: aquaponics, aquarium, DIY, thingiverse, stl, finnex
3
3.0
Jan 5, 2021
01/21
by
Carl Lalonde Dumoulin (cld_tech)
data
eye 3
favorite 0
comment 0
### Hydroponic tote waterfall, fits onto 4" ABS pipes. * 3/4" input nozzle You will need PVA & Water or HIPS & Acetone to make supports inside the waterway.
Topics: hydroponics, stl, aquaponics, thingiverse, Outdoor & Garden
11
11
Apr 2, 2021
04/21
by
jt123 (jt123)
data
eye 11
favorite 0
comment 0
A small aquaponics box for hanging over an aquarium using hydrotons. Slot designed to fit over 3-4mm glass, but can be sized larger if needed. Water level needs to be about 2cm from top of tank for bottom to be wet, but of course slot could also be scaled larger in the vertical direction if needed, as long as holes are not so big that hydrotons fall through ;) Desired future version will be parametric
Topics: Outdoor & Garden, thingiverse, aquarium, aquaponics, stl
13
13
Mar 16, 2021
03/21
by
LowCarb TNPer (LowCarbTNPer)
data
eye 13
favorite 0
comment 0
2" Weir Outlet for Aquaponics or other purposes
Topics: aquaponics, Sport & Outdoors, stl, thingiverse, aquaponic
3
3.0
Apr 4, 2021
04/21
by
Adam Walker (GingaNinja12345)
data
eye 3
favorite 0
comment 0
Net pot designed in FreeCAD.
Topics: thingiverse, aquaponics, 3D Printing, stl, hydroponics
4
4.0
Apr 24, 2021
04/21
by
Red Taurus (RedTaurus)
data
eye 4
favorite 0
comment 0
Mein Fischfütter Automat ist so aufgebaut, das die Futterbehälter-Halterung individuell angepasst wird und dann extra auf den Automaten angeschraubt wird. Die Steuerung übernimmt bei mir ein Relay von Homematic das eine Steckdose ein und ausschalltet. Der Futterbehälter ist bei mir eine Flasche 1 1/2 Liter Vöslauer mit Durchmesser 88mm. Momentan füttere ich Karpfen mit kleinen Pelets. Damit es zu keinem Futterstau in der Schnecke kommt, ist die Steigung der Schnecke zum Auslass größer....
Topics: futterautomat, aquaponics, fische, stl, Pets, thingiverse
699
699
Feb 14, 2011
02/11
by
Brewster Kahle
texts
eye 699
favorite 0
comment 0
Essays written for the club meeting in San Francisco October 12, 2009 by Brewster Kahle. Aquaponics, ebikes, and thermal batteries based on solar hot water heaters.
Topics: Brewster Kahle, aquaponics, ebikes, thermal batteries
3
3.0
Mar 25, 2021
03/21
by
Randall Nagy (KidSwidden)
data
eye 3
favorite 0
comment 0
The mission was to create an "air capacitor." Commonly seen as a clam shell "big-bubble" display in the pet-store (usually next to a treasure chest - avast), this 'be a larger design for larger displays / tanks. Great for surface-tension disruption, as well as funky light displays. Modifications to the top-print to support an earlier air-release (in formation,) as well as to allow us to adjust the release time + bubble size by adding-on some weight. Adding weight is required...
Topics: stl, airstone, thingiverse, Decor, aquaponics, Aquarium
9
9.0
Jan 18, 2021
01/21
by
Geeko Team (geeko_team)
data
eye 9
favorite 0
comment 0
Tuned bell siphon based on https://www.thingiverse.com/thing:2119390 (parametric OpenScad). Design is targetting a growbed about 11-13 cm deep and works fine without the bottom cup (see further tuning below). We used 20mm diametrer and 9cm height. Tickness of 1mm for reducing printing time (looks rigid enough). Model is upside down ready to print. Post-print tuning: the design will probably not work directly because snorkel is quite long and will not allow the siphon to stop without the cup...
Topics: bell_siphon, thingiverse, aquaponics, DIY, stl
1
1.0
web
eye 1
favorite 0
comment 0
Aquaponics Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Aquaponics Wiki, aquaponicsfandomcom
6
6.0
Apr 20, 2021
04/21
by
Matthew Meyer (osarusan)
data
eye 6
favorite 0
comment 0
*Note: I am not affiliated with 3Dponics at all. I just use their stuff! This is a tube supporter for 3Dponics systems. I had problems with my tubes curling from being stored in a roll, which often caused them to start dripping onto the floor instead of into the baskets. This little device clips on to the strings which hold the planter and help keep the tubes centered. There are two sizes. One is better for smaller (~6mm) air hose, which is what I use for my upper level of planters. The other...
Topics: thingiverse, stl, aquaponics, 3dponics, Outdoor & Garden
4
4.0
Apr 13, 2021
04/21
by
David Smith (jetpad)
data
eye 4
favorite 0
comment 0
This lets you make a connection from a 1/2" poly hose to a tank.
Topics: thingiverse, Outdoor & Garden, aquaponics, hydroponics, stl
9
9.0
Apr 28, 2021
04/21
by
Todd Wood (woody76)
data
eye 9
favorite 0
comment 0
Replacement seed pod for use in aerogardens or similar setups. I found one on here http://www.thingiverse.com/thing:32613 and used it with success but I think that mine will be a little sturdier.
Topics: hydroponics, thingiverse, aerogarden, Outdoor & Garden, stl, aquaponics
4
4.0
Mar 5, 2021
03/21
by
Ariel Armijo (cochayuyo)
data
eye 4
favorite 0
comment 0
A parametric basket with holes to put plants in an aquarium. The dimensions of the basket, grid holes and top edge support can be modified. The length of holes on the bottom grid must be adjusted by hand through the vector "p" that stores the length of the holes depending on the available space. 1 means all space, 0.5 half space and so on. The first value corresponds to the hole closest to the edge and the last to the hole closest to the center. All values must add 1. The number of...
Topics: Containers, stl, openscad, aquaponics, basket, aquarium, thingiverse
3
3.0
Jun 7, 2021
06/21
by
willem le roux (aspi)
data
eye 3
favorite 0
comment 0
starting garden in lockdown its small but can be upsized in printing software
Topics: Outdoor & Garden, indoor_garden, aquaponics, thingiverse, stl
4
4.0
Mar 9, 2021
03/21
by
Ian Hutchison (NilartPax)
data
eye 4
favorite 0
comment 0
I was not too happy with having so many parts just to make a u-siphon so I designed this. I think it works a bit better than a standard u-siphon from pvc elbows, but I'm sure it depends on your input flows and exit pipes, like with most siphons. The "theoretical" sizes were really tight from the filament I used, so I messed around and determined the 103 scale was right for my printer to fit 1/2 inch PVC. I had fun designing this, so I plan on designing some more special elbows, etc....
Topics: hydroponics, stl, thingiverse, siphon, aquaponics, Greenhouse, Hobby
5
5.0
Mar 15, 2021
03/21
by
Stephen Hayes (eussrh)
data
eye 5
favorite 0
comment 0
This is a cap that fits over the end of a PVC pipe to regulate the output flow of water. The Flow outlet fits over the PVC pipe and comes in several sizes depending on the pipe it should attach to. It should fit securely, but there are also screw holes if you need to attach it more securely. The Flow Knob is secured to the Flow Outlet with either a M3 or #4 machine screw (stainless). Washers and a lock nut are recommended. Higher numbers mean larger aperture and greater flow. The picture shows...
Topics: thingiverse, plumbing, watering, stl, aquaponics, Outdoor & Garden
10
10.0
Jan 14, 2021
01/21
by
Tony JEGOUX (TonyJ)
data
eye 10
favorite 0
comment 0
système autonome d'aquaponie. ci -dessous le lien de la pompe autonome https://fr.aliexpress.com/item/High-Quality-Monocrystalline-Silicon-Mini-Solar-Water-Pump-Power-Panel-Kit-Fountain-Pool-Garden-Pond-Submersible/32669775585.html?spm=2114.13010608.0.0.tvgUI9 Update 30/06/17 rajout d'un petit épaulement pour empêcher la rotation des réservoirs les un par rapport au autre. Update 03/07/17 modification du réservoir haut (problème de centrage de l'écoulement)
Topics: thingiverse, fish, autonomous, stl, hydroponics, Decor, aquaponics
4
4.0
Jul 22, 2021
07/21
by
sean sunoo (Seanfromthefuture)
data
eye 4
favorite 0
comment 0
meant to be printed on a CR-10 or similar sized bed This fits over the top of 2 gallon buckets. It's a little bit tight, but not so tight that it can't get on the bucket top; just tight enough so that it won't fall off when jarred. It has a hole for the male outlet of pumps
Topics: Sport & Outdoors, hydroponics, stl, aquaponics, module, thingiverse
3
3.0
Mar 5, 2021
03/21
by
Douglas Novy (douglasnovy)
data
eye 3
favorite 0
comment 0
This is a 3-part Aquaponics fish bowl topper for a 12" fish bowl with an 8" mouth. The three section clip together via an interference fit. It is driven by an airlift pump using a small air stone which clips into the bottom of the stand pipe. The top compartment is stuffed full of pond filter foam.
Topics: stl, airlift_pump, aquaponics, Biology, Fish, thingiverse
11
11
Jan 18, 2021
01/21
by
Geeko Team (geeko_team)
data
eye 11
favorite 0
comment 0
There a two venturi air intakes you can print easily. You should connect the small connector to the air pump and the large connector to a pipe that will carry the water to the location you want (e.g. in your aquaponics growbed). The lift is however limited, depending on your air pump it can be 10-20cm. There are two versions proposed: - the first is a simple remix of https://www.thingiverse.com/thing:2499477 . The modification is to have a vertical connector for the water. - the second is an...
Topics: thingiverse, aquarium, aquaponics, DIY, venturi_pump, stl
5
5.0
Mar 5, 2021
03/21
by
Randall Nagy (KidSwidden)
data
eye 5
favorite 0
comment 0
Attached find a new version of our original mason-jar filtration system. Unlike the original, a remixed mason jar lid is used to hold the in & out-flow tubes. Use two (2) "anchor plugs" to lock the 8 x 10mm plastic tubing onto the lid. In as much as we are having wonderful results simply using a cotton / cotton-poly face flannel 'asa' filter, once again we decided to include a way to disperse the out-flow around the same. If you have **no pet invertebrates** in your tank (shrimp,...
Topics: stl, aquaponics, Biology, aquarium_filter, aquarium, thingiverse
3
3.0
Oct 14, 2021
10/21
by
TStomek tomek (TSTomek)
data
eye 3
favorite 0
comment 0
Moss grille for easier laying. Name template : 100x100x3x1 Width : 100mm Height : 100mm Hole : 1mm Thicknes : 3mm ex. 125x150x4x2 Width : 125mm Height : 150mm Hole : 4mm Thicknes : 2mm
Topics: thingiverse, stl, aquaponics, moss, aquarium, Animals, plant
7
7.0
Jan 19, 2021
01/21
by
Stephen Hayes (eussrh)
data
eye 7
favorite 0
comment 0
These are 3D printed letters for labeling rafts. Deep Water Culture used in hydroponics and aquaponics uses plants in floating rafts. It can be hard to keep track of which raft is which especially when it is just sprouts that are hard to identify or different varieties of similar plants. This provides letters A-Z that can be stuck onto the rafts (using the letter prongs) to identify the rafts. The letters are about 1.5" (4cm) tall.
Topics: Outdoor & Garden, thingiverse, aquaponics, hydroponics, stl, gardening
15
15
Jan 13, 2021
01/21
by
Sean Eyler (Synthecus)
data
eye 15
favorite 0
comment 0
A simple screen holder for aquariums, aquaculture, or aquaponics. Use zip ties to keep the 2 together.
Topics: thingiverse, 3D Printing, stl, aquaculture, aquarium, aquaponics
Aquaponics is amethod of food production that integrates two types of cultivation in one unique place. Fishes and plants can be cultivated in this system, where the fish are maintained in recirculating aquaculture system and the plants in hydroponics (cultivation of vegetables without soil). In order to demonstrate that aquaponics is an alternative for the cultivation of vegetables and also a possibility of water treatment, the objective of the present study was to evaluate the water quality of...
Topics: Aquaponics, Astyanax bimaculatus, Civil construction residue, Sustainability.
9
9.0
Mar 5, 2021
03/21
by
Ian Hutchison (NilartPax)
data
eye 9
favorite 0
comment 0
I designed these as a way to start seedlings on the Beaver Plastics lettuce floats with ~1" openings. Any rafts with 1" holes will work. It also works well in 2" tubes with 1" holes drilled in. If using a larger tube, the water collection tube might not reach the reservoir. If you are looking for something like this, but these dimensions don't work, let me know and I will configure something for you. Put a cotton ball or some rockwool in the bottom so the container will hold...
Topics: stl, aquaponics, Biology, Seedlings, education, plants, thingiverse
3
3.0
Mar 19, 2021
03/21
by
Adam Walker (GingaNinja12345)
data
eye 3
favorite 0
comment 0
Thing was designed as a submersible pump I recently bought didn't have any kind of plumbing that came with it for me to attach to my sprinkler. The 12mm inner diameter print pushes on pretty snugly onto the NEWA Micro MC230 submersible pump and the reducer accepts some 6mm outer diameter (4mm inner) delivery tubing. The pump has an air attachment that came with it so may be able to rig up with air stones, but I haven't tested this. Only tested with a micro sprinkler which works very well. I...
Topics: aquaponics, thingiverse, aquarium, hydroponics, 3D Printing, stl
